Question about 1993 Saturn SC1

1 Answer

11. Trans axle Codes present - 1993 Saturn SC1

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Saturn Sc1, Sc2, SL1, SL2 Automatic Transmission codes when turning right after a reset or when hitting third gear. Intermittant dash lights dead, fuel pump failure and check engine light says various codes having to do with car starting in gear. Mine had a bad ignition switch which burned up the wires connected to the automatic transmission start satety switch. On the back of the transmission a black plastic device connected to the shifter cable. You must remove the black plastic shield from the upper wire to see if the wires inside are burned on the top connector that has six wires. If they are get a junkyard replacement connector and wires. Replace the ignition switch first to avoid same problem.

Posted on Nov 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trans. shifts hard only after driving awhile


Really need to repost with year make and model as well as any engine codes or other codes if any are present

Sep 01, 2016 | 2004 Buick Century

1 Answer

What size axle nut for 2000ford taurus se


Axle nut size? - Taurus Car Club of America : Ford Taurus Forum

www.taurusclub.com > ... > Suspension, Handling and Brakes
Jul 23, 2011 - 8 posts - ‎5 authors 1996 Mercury Sable front axle nut. I have read that the size is 30mm but the socket that I rented (30mm in a ... 2000 Duratec SE White Wagon Axle nut torque question. - Taurus Car Club of America ...
11 posts
May 4, 2012
CV Axle nut size
11 posts
Dec 9, 2011
Why Does The Axle Nut Need Such A Big Torque
11 posts
Dec 7, 2009
2000 Ford Taurus Front Wheel Bearing And Half-axle ...
11 posts
Apr 18, 2009
More results from www.taurusclub.com

Sep 28, 2015 | Cars & Trucks

1 Answer

4 Speed Trans axle do not shift in higher speed range


what is the make and model and year?. are there any codes .? sounds like your pressure control shift solenoid is bad

Dec 06, 2012 | Cars & Trucks

2 Answers

My dodge caravan 3.3L shows 5 malfunction codes what do they mean po455 po846 po500 po700 po732


P0455 = Evap leak monitor large leak detected.
This code usually means the gas cap may have been loose or needs the rubber gasket.

P0500 = No vehicle speed sensor signal.
Vehicle speed sensor is located on the transmission near one of the axle shafts (it may need replacing).

P0700 = EATX controller DTC present.
This simply means you have transmission related codes.

P0732 = Gear ratio error in 2nd gear.
This code is of some concern, it means the transmission is slipping in 2nd gear. However the trans may be in limp mode due to the speed sensor code (limp mode means the trans starts out in second gear in order to at least get to a mechanic). The first thing I would do is have these codes cleared as there may be absolutely nothing wrong with the transmission (especially if you pull the trans dip stick and the fluid does not have a burnt smell. The vehicle should drive normally after that. If the check engine light comes back, have the codes scanned ASAP (before any other unrelated code sets). Chances are it may be the output speed sensor if this happens (easy fix). Hope this helps

Regards

Oct 26, 2011 | 2002 Dodge Grand Caravan

1 Answer

I have code p0700


The trans axle Control Module (TCM) monitors the malfunction of sensors and actuators relating to trans axle control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the trans axle controls.
Possible Causes - Shorted or open circuit within transmission control module (TCM)
- Failure of trans axle control module
Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem.
http://www.helpforcars.net/obd_codes/p0700_suzuki.html

May 01, 2011 | Suzuki Forenza Cars & Trucks

1 Answer

.dodge 2500 diesel truck getting


there is a problem in the electronic automatic trans axle controller unit that needs to be checked out

Apr 29, 2011 | Dodge Ram 2500 Cars & Trucks

1 Answer

I have a 2001 dodge grand caravan sport in default mode. i have been driving it like this for a few months,waiting on a computer. within the last couple of days, it has been driving really rough. and i am...


If you loose the trans, and you will eventually,you can blame yourself, for driving it with codes present and in default mode

Having own a trans shop,I will tell you all caravans trans axles, and most other van type transaxles are junk.

Sell it.

Nov 09, 2010 | 2001 Dodge Grand Caravan

1 Answer

Trans HOLD light flashing and shifting hard . cheaked trans fluid , level was low but toped up and still shifts hard and hold light flashing


try diconnecting switch to test switch . Scan Pcm for trans codes . If codes present repair them. Otherwise tranny shop reqd

Oct 21, 2009 | 1993 Mazda MX-6

1 Answer

Transmission suddenly quit working


if the car doesn't move then the speedo would not move, right? or do u mean something else? yours trans has failed or the trans digital range selector switch is bad, have a scanner put on the system and see if any trouble codes are present.

May 29, 2009 | 2003 Ford Taurus

1 Answer

Trans axles


remove whole axle.. take strut assembly and steering gear apart ,. then big nut at hub, pull strut/steering linkage away from axle out of center...then pop inner axle shaft out of transmission , with drip pan underneath as you will flow trans fluid from there..do both sides then separate trans and drop...good luck

Dec 16, 2008 | 1997 Nissan.5 Altima

Not finding what you are looking for?
1993 Saturn SC1 Logo

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...