Question about 1992 Honda Accord

2 Answers

Replacing rear main seal - 1992 Honda Accord

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 2,422 Answers

THRUT IS ITS NOT WORTH IT THE MAIN BAERINGS GO IN GENERAL THE CRANK SHAFT IS SHOT EASER TO RE PLACE ENGINE THERECHEAP AT BONE YARDS JUST FIND A GOOD ONE

Posted on Oct 15, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 662 Answers

To do this you can remove transmission in place, and get access from there, or you can take engine and transmssion out and do it that way..........either way you do it, i would suggest checking the clutch or torque converter whilst it is out

Posted on Oct 15, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3600 Answers

SOURCE: If you were to replace a rear main seal on a 1995 Honda Accord

Yes, the seal has a pressed fit and is bolted on te rear of the engine, in fact all japanese cars do that, keeps them from leaking for a long time.

Posted on Jun 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cost replace rear main seal toyota camry


Four cylinder or V-6.

Both engines will require the removal of the timing belt to service the front crank seal. Both engines will also require the removal of the transmission to replace the rear main seal

either way way you would be looking at 3-4 hours for the front seal and 5 to 6 hours for the rear seal.

Apr 10, 2014 | 1997 Toyota Camry

1 Answer

How to replace a rear main seal in a 2001 chevy 2500


several things, the rear main seal is accessable by removing the transmission. if this vehicle is standard transmission, then would recomend new clutch at this time given the amount of labor involved. if automatic, remove drive shafts, transfer case, transmission, and flexplate ....replace rear main. approx 5 hrs.

DW Mylin

Nov 29, 2012 | 2001 Chevrolet Silverado 2500HD

1 Answer

How to replace rear main oil seal on vx commodore 5.7 auto


To replace the rear main oil seal I would recommend changing the whole rear main plate with gasket seal already done.
1.disconnect battery
2.raise vehicle on hoist
3.remove exhaust
4.remove tail shaft
5.remove starter motor
6.disconnect and remove transmission
7.remove ring gear
8.you will now see rear main assembly.
9.undo bolts holding rear main plate on
10. remove plate and clean surface area,follow these steps in reverse to refit...

Oct 12, 2012 | Holden VT Cars & Trucks

2 Answers

I have 1994 bluebird nissan altima with oil leak in transmission side.What posssible causes of it?


The Rear Main Seal is the main area for an Oil Leak on the Transmission Side. You will need to drop the transmission to remove the old rear main seal and install the new one.

Mar 05, 2011 | 1994 Nissan Altima

2 Answers

Need a engine diagram for a 2.8 ltr v6 showing rear main seal


Just a little advise before you jump to thinking the rear main seal is leaking. The vast majority of the oil leaks from these 2.8L motors are the rear intake manifold seal and the distributor o-ring. I would check them first. The rear main seal is in the lower rear of the motor, you have to remove the transmission to replace ti.

Jan 22, 2011 | Pontiac Firebird Cars & Trucks

1 Answer

Rear main seal replacment


If you have a shop you need to pull the engine to replace the rear main seal. There is a possibility of a two part seal. If you have a two part seal drop the oil pan and pull the rear main engine cap off and then replace the seal. You may need specialized tools.

Dec 03, 2010 | 1995 GMC Sierra C1500

2 Answers

Rear main seal is leaking on a Ford Mustang 2003 V-6


In order to replace the rear main seal u have to pull the transmission out to access it, u will need a special seal installer tool to install the new rear main "full circle seal", it u don't use the special ford tool the seal will leak again, also if there is a groove worn ion the crankshaft the crank must be repaired or replaced or the or the seal will leak again, so this is avery diff job, a 9 on the scale of 1-10 with 10 being the mos difficult.

May 10, 2009 | 2003 Ford Mustang

1 Answer

Rear main seal leaks..does this affect transmission??


A leaking rear main seal will not cause your transmission to leak.

The transmission has its own seal and should not leak because of the engine rear main seal.

Due to the labor involved in replacing the rear main seal on the engine, it is best if you replace the front transmission seal at the same time if possible.

Installation varies on different vehicles but the principles are the same.

Apr 15, 2009 | 1997 Oldsmobile Regency

1 Answer

Rear main seal


THE REAR MAIN IS WHAT IS CALLED A FULL CIRCLE SEAL, SO YES THE TRANS AND FLYWHEEL MUST BE REMOVED, U WILL ALSO NEED THE SPECIAL FORD SEAL INSTALLER, WITHOUT IT THE SEAL WILL MOST LIKELY LEAK SOONER AFTER INSTALLATION.

Jan 24, 2009 | 1999 Ford Explorer

Not finding what you are looking for?
1992 Honda Accord Logo

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...