Question about Hyundai Motor S

1 Answer

HOW TO PUT A 1992 HYUNDAI SCOUPE IN TIMING - Motor S Hyundai Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,509 Answers

Theres a knock pin in the upper timing gear and it needs to be at the top and with it at the top theirs and mark on the edge of the gear that lines up with the mating point of the valve cover and the top of the cyclinder head. the lower gear has a dimple on the block at about2 O'Clock and theirs a cut out dimple thats on the back edge of the lower gear that can be turned to line up withthe dimple in the block, the zero mark on the ting cove will also line up in this position with the cover on and the lower pully installed. Manuel trans models also have a mark on the frywheel gear on the clutch cover under a rubber plug in the top of the transmission bell housing that will line up too only have to see the one lined up good, with the new belt on turn the motor over by hand till you see the marks line up again as it's easy to put the belt on one thooth off. make sure to tighten the tensioner bolt as it's easy to forget and the belt will come off soon and with bad results.

Posted on Oct 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHAT CAR WILL INERCHANGE WITH 94 GEO METRO FOR SPARE TIRE


These are the same bolt patterns, bolt pattern is 4 X 4.5 or also known as 4 X 114MM. Measure 2 lugholes across from each other and it should measure 4 1/2" US or 114MM. the center hubs may be smaller/larger. Check the center hub size before purchasing:
1997 Acura- CL 16 x 6 (5 straight spokes)
1998 Acura- CL 16 x 6 (5 dual straight spokes)
1998 Acura- CL 16 x 6 (7 straight spokes
1990-89 Acura- Legend 15 x 5.5
1996-95 Acura- TL 15 x 6 (5 straight spokes with groove)
1997-98 Acura- TL 15 x 6 (11 straight spokes)
1994-92 Acura- Vigor 15 x 6 (11 triangular slots)
1999-98 Chevrolet- Metro
1989-85 Chevrolet- Sprint
1991 Dodge- Colt Vista 13 x 5 (15 slots)
1993-92 Dodge- Colt Vista 14 x 5.5 (5 straight spokes)
1992-84 Eagle- Summit/Summit Wagon
1992-91 Eagle- Summit 13 x 5 (15 slots)
1993-88 Ford- Festiva 12 x 4 40mm offset
1993-91 Ford- Festiva 12 x 4.5 40mm offset (8 elongated triangle slots)
1997-89 Geo- Metro
1999-92 Honda- Prelude
1999-90 Honda- Accord (4 cylinder models)
1999-91 Hyundai- Elantra
1995-92 Hyundai- Elantra 14 x 6 (16 slots)
1995-92 Hyundai- Elantra 14 x 5.5 (7 curved spokes)
1998-96 Hyundai- Elantra 14 x 5.5 (5 straight spokes)
1999-90 Hyundai- Accent/Excel/Pony
1994-92 Hyundai- Excel 13 x 5
1991 Hyundai- Sonata 15 x 6 (18 rectangular slots)
1994-92 Hyundai- Sonata 15 x 6 (9 triangular slots)
1996-95 Hyundai- Sonata 15 x 6 (9 straight spokes)
1997-95 Hyundai- Sonata 15 x 6 (5 twisted spokes)
1998-97 Hyundai- Sonata 15 x 6 (5 straight single groove spokes)
1995-90 Hyundai- Scoupe
1992-91 Hyundai- Scoupe 14 x 5 (6 curved spokes)
1995-93 Hyundai- Scoupe 14 x 5 (5 curved spokes)
1998-97 Hyundai- Tiburon 15 x 6 (5 twisted spokes)
1998-97 Hyundai- Tiburon 15 x 6 (5 raised straight spokes)
1989-81 Mazda- 323/GLC
1985-84 Mazda- RX7 GSL-SE 14 x 5.5 40mm offset
1991-86 Mazda- RX7 14 x 5.5 40mm offset
1987-85 Mazda- 626/MX-6
1994-91 Mercury- Capri 14 x 5.5 45mm offset (16 holes)
1994-91 Mercury- Capri 15 x 6 45mm offset (3 curved spokes
1994-91 Mercury- Topaz 14 x 5.5 (16 holes)
1998-92 Mitsubishi- Expo/Expo LRV/Vista Wagon
1994-92 Mitsubishi- Expo 14 x 5.5 (5 straight spokes)
1999-84 Mitsubishi- Galant
1991 Mitsubishi- Galant 14 x 5.5 (18 slots)
1991 Mitsubishi- Galant 15 x 6 (8 straight spokes)
1991 Mitsubishi- Galant 15 x 6 (5 straight spokes)
1993-91 Mitsubishi- Galant 14 x 5.5 (15 slanted spokes)
1992 Mitsubishi- Galant 15 x 6 (5 straight spokes)
1993 Mitsubishi- Galant 15 x 6 (8 triangular and 8 rectangular slots)
1993-84 Mitsubishi- Mirage
1993-91 Mitsubishi- 2000GTX 14 x 5.5 (18 slots)
1991-80 Mitsubishi- Tredia
1999-93 Nissan- Altima
1995-82 Nissan- Stanza
1991-84 Nissan- Maxima
1990-78 Nissan- B310/Pulsar
1989-94 Nissan 240sx
1989-94 Nissan Silvia
1986-82 Nissan- Sentra
1993-84 Plymouth- Colt
1985-79 Plymouth- Arrow/Champ
1999-89 Suzuki- Swift
1991-80 Toyota- Cressida
1985-80 Toyota- Celica

Oct 30, 2017 | Geo Cars & Trucks

1 Answer

1992 hyundai s coupe 1.5l eng fuel to injectors but injectors not firing


The injectors are grounded by the cars powertrain control module (called the PCM for short) at the appropriate time calculated by the crankshaft and camshaft positions which are read and sent to the PCM by the two sensors.

Oct 04, 2012 | Hyundai Motor 1992 Scoupe

1 Answer

My Hyundai Scoupe is out of time, how do I line up everything and put it back in time?


Hi, I would like to ask you why was belt taken off.? Your mechanic should have helped you with this. DO NOT run engine if belt is broken or come off. Damage to engine will result... The timing is
a very touchy component. Please be carefiul

Jun 14, 2011 | Hyundai Genesis Coupe Cars & Trucks

1 Answer

Timing marks for 94 hyundai scoupe LS


CLICK HERE

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!

Aug 29, 2009 | Hyundai Motor 1994 Scoupe

1 Answer

1994 Hyundai Scoupe Ls


check the timing maybe your timing is off or check all the plugs on the motor.


hope this helps good luck !!

Nov 02, 2008 | Hyundai Motor 1992 Scoupe

1 Answer

Any ideas


HI
did your car is Hyundai scoupe 1992 ?????
if that...... check the CKP sensor in the distributer ....
or there is a flute in the ECU (engine control unit ) inside the car..
tell me more to .....to help you

with my best wishes

Aug 23, 2008 | Hyundai Motor 1992 Scoupe

1 Answer

Hyundai scoupe 1992


maybe a ground wire came off or lose or just not making a connection?

Jan 06, 2018 | Hyundai Motor 1992 Scoupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

79851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...