Question about GMC Sonoma

Open Question

I need a vacuum diagram for a 2001 gmc sonoma 4x4

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 1998 gmc sonoma push button 4x4 busting diaphram vacuum actuator

On top of the transfer case is a vacuum switch with 3 vacuum lines connected to it. This switch controls when vacuum is applied to the vacuum actuator. This switch can fail partly and allow fluid from the transfer case to be sucked up into the vacuum lines and anything connected to them as well. When you replaced the actuator before, did you notice any oily fluid inside of it?

Posted on Dec 23, 2008

Ad
michigan man
  • 3533 Answers

SOURCE: 2001 ford taurus . i need the vacuum diagram so i

you can try your local library for a diagram and pictures showing you how you can also try this website: autozone.com

Posted on Mar 08, 2009

Molson02536
  • 3854 Answers

SOURCE: I need to see the "how to's" in replacing the one way check valves on my 2001 gmc sonoma 4.3

On the 2001 gmc jimmy 4.3L v6 engine there are two air pump check valves: there's a pipe (about 1" diameter) that comes off each of the exhaust manifolds. the check valves are screwed onto those pipes. then a rubber hose (about 1.25" outside diameter) is clamped to the front of each check valve and connects to the air pump, which is hidden behind the vehicles grille in front of the radiator. typically, if you need to replace these (the life expectancy is about 3-4 years), it starts a chain of events that might be as follows: during the wintertime, water from the exhaust leaks through the worn out one-way check valves, and ends up in the air pump. the water freezes, and the ice jams the air pump, which may or may not ruin the air pump, but which usually blows the air pump fuse, which is impossible to find if you're rummaging around the passenger compartment fuse box or the under-hood fuse and relay box. it ain't there! so if you're looking under the hood leaning up against the front bumper, slide to your left around the passenger side headlight. now you should be looking at the battery, leaning up against the passenger side fender. look down between the battery and the fender. you have to push a few things out of the way, but there you will find a green 30 amp blade fuse (about 1" x 1" fuse--and $2.99 at autozone). this blown fuse should have triggered the check engine light and a DTC (diagnostic trouble code) of p0410 (secondary air injection system). for that vehicle there is a TSB (technical service bulletin) put out by gm (bulletin # 04-06-04-015; march 2004). if you want to print out some literature about all that i've mentioned just surf on over to http://www.obd-codes.com/p0410 for more links and documentation. my credentials: self-proclaimed auto mechanic for 26 years (sorry, no ase certification yet [but still trying to find time to study for the tests]) and college dropout (after 3 years of electrical engineering)--so, in other words, don't believe a word i say; just go to that website and get it straight from the horse's... 
Good luck and hope this helps. I know you have a Sonoma but we have the same platform. I am thinking of buying a set of headers without the Air injection system and having the jimmy dyno tuned again to eliminate the service engine light and recalibrate the ECM to eliminate the air injection pump. 

Posted on May 25, 2009

  • 225 Answers

SOURCE: need vacuum diagram for 4-wheel drive

the 4x4 don't use vacuum. the front is auto lock when the transfer is engauged with the button. if the light don't which when pressed into 4hi or 4low. the motor on the transfer case maybe hung up. they have to be used at least 4 times a year not to go bad. the motor is on the back side of the transfer case. best of luck.

Posted on Aug 07, 2009

  • 524 Answers

SOURCE: Need 95 gmc jimmy vacuum diagram. I have a loose

THat goes to your map sensor. If you look very closely under your hood there will be a vac line diagram there

Posted on May 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need emissions diagram for 1997gmc Sonoma pickup 2.2 4 cylinder 5speed Manuel transmission


Look on the cross member in the front of the radiator on the driver side and there should be a drawing there. Hope this helps.

Nov 20, 2016 | 1997 GMC Sonoma

1 Answer

How do I remove oil pan on a 2001 gmc Sonoma pick up truck to replace gasket


1993 GMC SONOMA 2.6 CYL V6 NOT 4x4 OIL PAN ...

? 2:31
https://www.youtube.com/watch?v=1KsRTlnW7Cg
Sep 27, 2011 - Uploaded by JohnSmiths8379858
trying to reomove the oil pan to this truck has been sitting for about 6 ... 1993 GMC SONOMA 2.6 CYL V6 NOT 4x4 OIL PAN REMOVAL "HELP!

Oil Pan Gasket: How to Change Oil Pan Gasket for 2001 ...

www.2carpros.com/questions/2001-gmc-sonoma-oil-pan-gasket
Mar 18, 2011 - How to change oil pan gasket for 2001 sonoma, can i get away with just raising the engine two inches to ... 2001 GMC Sonoma • 4 cylinder 2WD Automatic • 150,000 miles ... You need to remove the engine to get the sump off.

Nov 28, 2015 | GMC Cars & Trucks

1 Answer

Is my 1995 GMC Sonoma 4x4 a half ton truck


small trucks like that are considered 1/4 ton. silverado 1500 1/2 ton an silverado 2500 3/4 and up. same goes for gmc

Apr 06, 2013 | 1995 GMC Sonoma

1 Answer

1998 gmc sonoma push button 4x4 busting diaphram vacuum actuator


On top of the transfer case is a vacuum switch with 3 vacuum lines connected to it. This switch controls when vacuum is applied to the vacuum actuator. This switch can fail partly and allow fluid from the transfer case to be sucked up into the vacuum lines and anything connected to them as well. When you replaced the actuator before, did you notice any oily fluid inside of it?

Dec 10, 2008 | 1996 GMC Sonoma

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

947 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...