Question about 1996 Chevrolet Tahoe

1 Answer

Turn signal relay is bad. Where is it? - 1996 Chevrolet Tahoe

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

LOOK UNDER LEFT INSTRUMENT PANEL ON THE DRIVER SIDE.FUSE COVER WILL TELL YOU YOUR FUSE AND RELAY LOCATION.

Posted on Oct 14, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

flbergeron68
  • 541 Answers

SOURCE: where is the turn signal flasher/relay for 2004

under the dashboard

Posted on Jul 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is.turn signal relay


There are only fuses. The relay is built into the hazard switch. But usually it is the turn signal switch that is bad.

May 22, 2016 | 2007 Chevrolet Avalanche LTZ

2 Answers

I own a 2003 Yukon XL. When I use the right hand turn signal, the hazards come on instead. Solutions, answers?


When you touch the turn signal lever do you hear clicking noise befor u lift up or down if so then could be bad turn switch or just bad relay replace relay first if still doing it replace the switch get Haynes book to help with switch removal and install if relay don't fix it cause u will have to remove steering wheel etc to fix it if switch is bad

Feb 21, 2013 | 2003 GMC Yukon XL

1 Answer

2000 impala,emer. flasher and turn signal not working; have replaced turn signal switch


you may have a bad flasher relay. its also known as a hazard relay, or turn signal flasher.

Jul 18, 2012 | Chevrolet Impala Cars & Trucks

1 Answer

1998 Dodge Durango flasher relays location


Turn on the Durango and check each of the four turn signals to make sure that the bulbs are not burned out. If you find one that has gone out, replace the bulb and retest the turn signals. When a bulb goes bad on this circuit, the resulting operation can mimic a bad flasher or one that is failing.

Locate the combination turn signal flasher and relay. It is on the left end of the driver's dash. Open the access door and view the collection of relays and fuses. At the left side of the mounting block is a larger flasher and relay. This is the combination turn signal flasher and relay.

Test the relay by placing you finger on the relay housing and activating the turn signal. If you have found the right one, you should feel a clicking as the turn signal blinks. Remove the relay, replace with the new relay and close the access door

.

Start the Durango and activate the turn signals to check that they each work. The light should turn on and should blink. Also, check the hazard lights to make sure they work.

Feb 11, 2012 | Dodge Ram 1500 Cars & Trucks

2 Answers

92 caprice classic turn signals not working, but the bulbs are fine. Hazards, brakes, etc all work fine. Any ideas?


Yes, the problem is the turn signal flasher is defective. You can has two flasher relays. One for the turn signals and one for the hazard lights. That is why the hazard lights flash and the turn signals do not. Replace the turn signal flasher relay located on the drivers side of the steering column, mounted behind the instrument cluster in the convenience center. They are both mounted in the same location so turn on the hazard lights and the one that you put your finger on that is not clicking is the turn signal relay.

Mar 08, 2011 | 1992 Chevrolet Caprice

1 Answer

Brake light not work. done all checking blubs is good, replace switch, replace relay, fuse all good. turngal work hazzard light work but no brake light. i bypass on relay it work so i cant leave short...


the brake light switch powers the wire which goes to the turn signal switch. So I think if the turn signals works, then the turn signal switch is bad. Check for power at the wire going from the brake switch to the turn signal switch. . Since you didnt tell what year or model the truck is, I cant tell you what the wire color is.

Dec 10, 2010 | GMC C3500 Cars & Trucks

3 Answers

Blower motor and turn signals stopped working


CHECK BLOWER MOTOR FUSE AND RELAY.IF ALL IS GOOD.CHECK TO SEE IF BLOWER IS GETTING POWER.IF NOT.SWITCH IS BAD.IF YES REPLACE BLOWER MOTOR.IF TURN SIGNALS STOP WORKING.CHECK FUSE FIRST.IF FUSE LOOK GOOD. CHECK BULBS TO SEE IF THEY ARE BLOWN.IF BULBS LOOK GOOD PROBLEM COULD BE WORN OR CORRODED BULB SOCKETS OR.BAD GROUND.OR THE TURN SIGNAL SWITCH IS BAD.

Aug 24, 2009 | Plymouth Voyager Cars & Trucks

1 Answer

Turn signals won't blink


relay is bad turn signal relay

Jul 31, 2009 | 1998 Dodge Durango

2 Answers

Turn signal problems


replace the hazard switch it controls the turnsignals

Aug 03, 2008 | 2002 Volkswagen Beetle Turbo S

Not finding what you are looking for?
1996 Chevrolet Tahoe Logo

302 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...