Question about Ford Escape

1 Answer

How to repair a fuel pump on a 2008 ford escape

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 14,036 Answers

TO CHANGE FUEL PUMP YOU HAVE TO RELIEVE FUEL PRESSURE FIRST.LIFT THE LEFT REAR SEAT CUSHION POSITION THE CARPET ASIDE.REMOVE THE SCREWS AND THE FUEL PUMP MODULE ACCESS COVER.DISCONNECT THE FUEL PUMP MODULE AND ELECTRICAL CONNECTORS.REMOVE FUEL PUMP FUEL VAPOR CONTROL TUBE ASSEMBLY VALVE ELECTRICAL CONNECTOR.USING A SUITABLE FUEL PUMP LOCK RING REMOVER.ROTATE THE LOCK RING COUNTERCLOCKWISE AND REMOVE FUEL PUMP MODULE ASSEMBLY CAREFULLY.PUT EVERY THING BACK IN VISA VERSA.BECAREFUL WHEN WORKING ON FUEL SYSTEM.DONT MAKE NO SPARKS WHEN REMOVING FUEL PUMP MODULE LOCK RING.USE LOCK RING TOOL DONT USE HAMMER AND A METAL PUNCH WILL MAKE A SPARK CAUSE EXPLOSION.

Posted on Oct 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will 2010 ford escape electronic power assist fit 2008 ford escape


FOr the best advice, contact Ford customer service directly. Here's the link-

Oct 15, 2016 | 2008 Ford Escape

1 Answer

2008 ford escape will not take on fuel without shutting down nozzel


you have a blockage of the vent below your filler cap clear it.

Feb 19, 2015 | 2008 Ford Escape

1 Answer

Get the water pump off my 2008 ford escape do I need to pull the pully above the pump their are two bolts behind the pully


this is where the Pro's come in.. will need a Puller.. with it in the engine housing.. which is nearly impossible.. most of the time you have to take the entire engine out to do this.. So for less Headace's and screaming! Have a Pro do it..

Oct 20, 2014 | 2008 Ford Escape

1 Answer

I have a 2008 Ford Escape XLT. it has a Auto-lock function, where you hit a certain speed and all doors lock. It gas stopped working. I would like to fix it myself, if I can. Please help.


check the fuse for fuel pump-look in the index for fuses-then look for the fuel pump in the list-it should give you a location of the fuse -cheers Denny

Nov 17, 2013 | Cars & Trucks

1 Answer

2008 Escape Fuel gage reads empty


Do you know if they also replaced the sending unit in the tank ?
It could also be a problem with the gauge on the dash.

Jul 08, 2013 | 2008 Ford Escape

1 Answer

Need to know where power steering pump is located in the 2008 Ford Escape


It is the Pump located at the Serpentine belt end of the engine with the large cap on it that says Steering Fluid.

Oct 18, 2012 | 2008 Ford Escape

1 Answer

Where is the fuel pump driver module on a 2008 Ford Escape


on the bottom of the car near the gas tank, looks like a small square box with wires connected to it.

Jul 22, 2012 | 2008 Ford Escape

2 Answers

My reset, info and trip button's on my 2008 Ford Escape wont work.


Disconnect the battery for 30 mint and see if this fix the problem , let me know .

Nov 15, 2011 | 2008 Ford Escape

1 Answer

I thought my 2008 Escape 2.3L 4cyl could run on E85, but when I got through the 1st 1/4 tank, my ck eng lite came on. Is this a result of the fuel or something else?


I don't think any of fords four cylinders are e85 compliant. The escape 3.0 liter didn't become e85 compliant until 2010 if you vehicle was e85 compliant it would have a flex fuel emblem on the side of it and it would have a sticker on the fuel door. Your check engine light is most likely because of the e85. If it's running ok. Burn of that tank and then return to regular gas. The check engine light should go out after a couple of fill ups.

Jul 06, 2011 | 2008 Ford Escape

2 Answers

I had a hole patched in the gas tank of a 2008 Ford Escape Hybrid. Now the fuel gauge doesn't work and the engine light is on.


When the engine light is on you have a problem detected by the computer on your vehicle which could be related to the fuel gauge not reading correctly or not at all. You can go to the local parts store and they will read your codes generally for free. You can post the codes they read on here and we can try and help you out. Did they take your fuel tank out from under the vehicle to repair it? If so they may not have hooked up the connector on top of the fuel tank so the sender will work. Did it work at all after they did the work? var fctb_tool=null; function FCTB_Init_afc0274c10a74ee6baea7ce7c5283487(t) { fctb_tool=t; start(fctb_tool); }

Nov 13, 2010 | 2008 Ford Escape Hybrid

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

976 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...