Question about 2002 Toyota Camry

Open Question

Acheck engine light on code p1145 - 2002 Toyota Camry

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to fix code p1145 on my focus 1.6 diesel auto ?

P1145 - Heated Oxygen Sensor (HO2S) Cross Counts Bank 1 Sensor 3

Jun 01, 2016 | 2006 Ford Focus

1 Answer

Focus code P1145 what needs fixing.

This is not a calculated torque fault, that is for gas engines.

Jun 01, 2016 | Cars & Trucks

2 Answers

Code P1145?

If it's a Nissan, look on this thread:

Code P1145 2 headache

More threads can be read at:

error code p1145 Google Search

Apr 25, 2016 | Cars & Trucks

1 Answer

Infiniti qx4 2001, 3.5l. mechanic is unsure of reason to engine sound. Only details is 3x errors (#P0135, #P1140 & P1145) and no/low oil pressure to top part of engine even at 2000rph. Any ideas?

code p 1140 refers to camshaft variable valve timing sensor, bank 1range performance problem===causes---wiring, camshaft variable timing sensor--ECM
code p 1145 is the same but on bank 2
I came across a site which is a forum page that explains that oil pressure problems were attritubited to a failed gasket in the timing cover
I suggest you read this as the fault codes indicate a lack of oil pressure rather than a sensor problem as what you have stated
It is a problem in that the gasket was paper and after a perios blew out and now the replacement gasket is re-enforced by nissan to prevent further problems

Jan 25, 2016 | Infiniti Cars & Trucks

1 Answer

Diagnostic fault code P1145 will not start only with easy start,even when at temperature,where is the sensor located for this fault please.

if you have to use easy start then you have a problem where are you spraying the easy start for the engine to start ? P1145 has no meaning with out and engine or model there are lots of engine codes and engines with this code and they mean different things. i'm thinking if it runs with easy start. then it could be a air problem, blocked vent but then it would shut down again, same with fuel fault. you may not be getting any and its just burning the easy start. that could be the fuel pump or relays for the fuel or the injectors. but as not knowing the engine model etc could not say.

Dec 02, 2013 | Cars & Trucks

2 Answers

Flashing SES, P0305, and P1145

A flashing SES light means that you are operating the vehicle under conditions that are DESTROYING your catalytic converters! This is not good.

Diagnostic Test Code (DTC) P0305 is defined by SAE J2012 as "Cylinder 5 Misfire Detected".

DTC P1145 is a "manufacturer-specific code" and is defined by Nissan as "Bank 2 Intake Valve Timing Control Position Sensor - High Or Low Voltage"

So, to put it simply, you need to find out WHY cylinder #5 is misfiring and get it fixed. You also need to diagnose the intake valve timing control position sensor circuits on bank 2 to (1) find out if the voltage is HIGHER or LOWER than specification (since the code itself is not specific about which it is). And (2) find out what is CAUSING the voltage to be out of specification and take the appropriate action correct it.

Apr 27, 2012 | 2002 Nissan Pathfinder

1 Answer

My 2004 pontiac grand am had acheck evaporate code 0442 . I tried the first easiest part and also mine was very worn out was the fuel cap. I replaced the fuel cap with a new one. Check engine light had...

OK, P0442 is an evaporative leak fault. The gas cap may well have corrected that issue. If you smell gas from the engine area you almost certainly have a fuel leak. You should be very careful - you don't want your car to catch fire and put people's lives in danger. When a car catches fire it goes up very quickly, and if it's near your home....

Look by the fuel injectors and fuel rail for signs of a leak. If you don't see anything there have a professional technician look at it.

Jan 18, 2012 | 2004 Pontiac Grand Am

1 Answer


calculated torque error
alternative fel control module has activated the mil.
i dont beleave this has anything to do with the abs. abs is normally just for brakes. the (P) stands for powertrain. i hope this helps.

Sep 25, 2010 | Ford Freestar Cars & Trucks

1 Answer

My 2007 have a stabilitrak on and service traction control soon. Do I need to take this to s shop or can I do something to correct this problem; along with acheck engine lamp on now

I would advise to take it to a shop you trust and let them scan your vehicle for trouble codes. From there they can give you an idea as to why these messages appeared. : )

May 21, 2010 | 2007 Chevrolet Tahoe

1 Answer

Codes p1145 po430 p0440 p0305 wont pass emissions

Have the compression checked....Hook a vacuum guage to the engine...This should give you a good idea of how much life is left in the engine.....

Apr 12, 2009 | 2001 Nissan Pathfinder

Not finding what you are looking for?
2002 Toyota Camry Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides