Question about 2006 Hyundai Santa Fe

1 Answer

Subject: Repair Hyundai H100 clutch problems 2006 model. I am the owner of a 2006 Hyundai H100 light truck. Recently, the clutch after being depressed would not spontaneously, return to its normal position. To correct the problem the inner part of the slave cylinder was changed. However, the problem is still present and occurs during conditions of heavy traffic when frequent depression and use of the clutch are necessary. To somewhat alleviate the problem the vehicle must be brought to a standstill, remove foot off the clutch for a couple of seconds during which time the clutch pedal will gradually rise to normal position. If this is not done the gears will grate when an attempt is made to change gears or the gears will just not change. The problem is very annoying. I have tried to obtain the service/workshop manual for the vehicle without any success to date. I will be very happy if FixYa can help me to solve this problem by providing advice on how to approach this problem and helping me obtain a service/workshop manual for the vehicle. Many thanks Henry.

Posted by on

  • Henry Davis Oct 18, 2010

    Thank you sir for the solution that you provided. It seems very likely that it will work. It was applied yesterday. I will be testing it over the next few days, under strenuous conditions, to see what happens. When the testing is over, I will report to you.

    With kindest thanks,



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Hyundai Master
  • 22,114 Answers

Cant help with a manual ,it sounds like the spigot shaft housing that the thrust bearing slides on is dirty and gummy ,now what i would do here is to see if i can get the long spout of my oil can with engine oil in through the clutch arm hole and give it a squirt ,then fit a fairly light spring between the end of the clutch arm and somewhere on the gearbox ,even if you have to make a bracket and fix it to an existing bolt hole ,this will cure your problem iam sure as nearly all vehicles here in europe are manual and in this part of europe where its dry and dusty this is a very common problem for me ,that and old people whos knees are reumaticey and they rest their foot on the clutch and burn the clutch out .Another big problem is these automatic clutch adjusters made out of plastic ¿¿ what a fiddly job to replace these are .

Posted on Oct 14, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to assemble tensioner on Hyundai h100 truck 2006 model where does the springs hook on

There should be holes in the spring tensioner housing to insert the spring ends

Aug 31, 2016 | 2008 Hyundai H100 2.6iD

1 Answer

Where is the clutch master cylinder on hyundai h100 located

this is the part
looks like its attached to the clutch pedal and has a booster close by

2 5L 41600 4F000 Clutch Master Cylinder HYUNDAI H100 PORTERII


Jul 28, 2016 | Hyundai Cars & Trucks

1 Answer

Engine surges

you need to scann the van

Jul 03, 2015 | 2008 Hyundai H100 2.6iD

1 Answer

Where do I find the diesel filter on the Hyundai H100 model 2006

I don't know if this picture shows any justice, but as it shows, following (a), it seems to be somewhere off the fuel line. This could be located under the vehicle. But as we don't service or sell these in Canada my system only gives me this picture.
I hope this helps.

Feb 11, 2015 | Hyundai Cars & Trucks

1 Answer

Valve clearance on hyundai h100 2.6 diesel 2006

H100 D4BB engine
cold engine
Ex 0.15mm
Inlet 0.15mm

Jun 10, 2012 | Hyundai Cars & Trucks

1 Answer

Passenger side airbag light wont stay off

This subject is covered in the 2006 Ford Escape Owner's Manual starting on page 116 under the heading of "Front Passenger Sensing System". I highly recommend that you read this FIRST.

If you do not have your 2006 Ford Escape Owner's Manual you can get a free PDF version HERE. (direct link to file)

If after reading the Owner's Manual, you are convinced that the problem is a malfunction (not normal operation) and is not caused by operator error, I recommend that you take your vehicle to a certified auto repair technician (or Ford Dealer) for diagnosis and repair. I DO NOT recommend attempting ANY KIND of do-it-yourself diagnosis or repair on any supplemental restraint system components without the proper training and equipment.

Apr 28, 2012 | 2006 Ford Escape

1 Answer

Frequent clutch changes on Hyundai H100 Pickups

I own H100 is at 121000 km now I have never changed clutch.I agree with the dealer when they say the driver sometimes are little bit harsh on vehicles

Mar 23, 2009 | 2008 Hyundai Tucson

Not finding what you are looking for?
2006 Hyundai Santa Fe Logo

Related Topics:

659 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides