Question about 1997 Lincoln Town Car
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the compressor is running then it is either rear bags are leaking or compressor is to weak.If you have a way to raise car up in the air or at least the rear when you get it up you will probably notice cracks in the bags at the bottom of the bag. A temporary fix is you can take a tube of silicone rubber and rub it over the cracks in the bottom of the bags,let it dry then see if it will raise back up.If it does then you can probably get by with just bags.
Posted on Feb 24, 2009
SOURCE: R & R power window drivers side
I am in the process of doing this now to my 96 Lincoln Towncar. Today I removed the door panel. Hidden scews that attach the door panel are at end end of the door pull strap. The plastic end pieces are removable and each have a screw underneath securing the top of the door panel.
Hidden behind the water shield material at the top of the door are two nuts that retain the top connection of the window lift. I am going to razor cut a straight line through the water shield material to insert a socket to remove the two nuts and then put duck tape over the razor cuts rather that pull the water shield material from the door frame.
Started drilling on the left rivet to detach window from the regulator and quit for the evening.
Have three rivets to drill to detach the pwoer window motor from the door frame.
Two more rivets at the bottom of the door to drill out to detach the lower window regulator from the door frame.
Do not know how I am going to remove the right rivet of the bracket that hold the window yet. Looks like a would need a long drill bit to reach through the door frame to make contact with the rivet.
The replacement rivets that came with my window regulator are to big for my rivet tool. Could end up using nuts and bolts. Sure would make it easier for the next window regulator replacement.
Hope I have some good luck using the drill tomorrow. kkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkddddddddddddddddddddddddddddddddd
Posted on Mar 08, 2009
SOURCE: power window control
So as not to be repetitive, for the failure of your power driver side window and rear window, review this handy diagnostic article, which identifies the possible causes, from a bad fuse, relay to window motor, etc.:
This should help narrow down your particular cause.
Posted on Jun 06, 2009
The motor is going out. It trys to go up but wont right? If you help it and GENTLY pull up on the window as you are pushing the button it will go up. Hope it helps!
Posted on Jun 27, 2009
I have the same problem in my 2001 towncar. I removed the switch control panel (without removing the door panel) by prying up from the front of the panel. There's a spring loaded plug under the mirror adjustment. Once you get that pulled up, the whole unit will lift out. Since there's a two year difference in the models - it MAY not work... however, you might not have to remove the whole door panel as you think.
In my case, the wiring was bad.
Posted on Sep 03, 2009
Tips for a great answer:
Mar 19, 2014 | 1998 Saturn SL
Aug 28, 2012 | 1997 Honda Civic
May 06, 2012 | 1997 Lincoln Town Car
Dec 31, 2011 | 1996 Nissan Pathfinder
Oct 13, 2011 | 1994 Lincoln Town Car
Oct 05, 2010 | 1997 Lincoln Town Car
Feb 06, 2010 | 1997 Chevrolet Venture
Jul 28, 2009 | 1997 Chrysler Town & Country
Jun 27, 2009 | 1993 Lincoln Town Car
Jun 06, 2009 | 1999 Lincoln Town Car
116 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: