Question about 2006 Volkswagen Jetta

1 Answer

My drier will only work when in the 'timed dry' position when on one of the preset positions it the works for about a minute then turns off

Posted by on

  • cpyne Oct 14, 2010

    Before I order the timer, I would like to confirm conclusively that it is not something else?
    I have noticed when the 'sensor dry level' is activated does the problem persist.
    All other functions like air fluff, timed, and dewrinkle work.
    thanks

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

Sounds like the timer needs to be replaced. This also controls the cycles. It is common for them to go bad. daysappliance or partselect . com is your best bet.

Posted on Oct 14, 2010

  • Nate Stansfield
    Nate Stansfield Oct 14, 2010

    You can test the timer with an ohmmeter by testing the resistance. The ohmmeter should be on the rx1 setting. You can test the timer in each mode/setting.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

07 mini change the cam sensor and timing code keep come back on saying timing to far advance


possibly not the sensor but the hydraulic adjuster that controls the cam timing
the cam sensor reports the cam position in relation to engine rpms and the ECM adjusts the cam position by the hydraulic servo / solenoid to the preset cam position for that rpms
I suspect that the problem will be in that servo / solenoid

Aug 20, 2016 | Mini Cars & Trucks

2 Answers

Why wont my car stay started


Charge battery with charger to maintain then turn key to on position ,do not crank over . Leave in on position for ten minutes then turn to off and do the ten minute cycle to on position 2 more times then turn off then try to start

Jul 28, 2014 | 1999 GMC Envoy

1 Answer

1998 s-10 security light


If the security light is hot or flashing when the key is in the on position, most likely the ignition key tumbler housing has failed.

You can try resetting the pass code by turning the ignition switch to the on position (do not crank or start the engine). Leave the key in the on position for 10 minutes. Turn the key to the off position, wait 5 seconds and turn the key to the on position again and leave it on for 10 more minutes. Cycle the key to the off position again for 5 seconds the back on for a final 10 minutes. Once the final 10 minutes is complete, turn to the off position again, wait 5 seconds and now turn the ignition on and to the start position. The pass code has now been reset and it should start. If the reset does not work you will have to change the ignition key tumbler housing that contains the key code resistor.
Good luck

Apr 03, 2014 | Chevrolet S 10 Cars & Trucks

1 Answer

How to reset my security or antithef ligth on escalade 2004 wont start or cranck


Try this it works on an 2002 with the master key take and turn the key on wait about ten minutes the antitheft light will go off then switch the key to the off position wait 5 seconds and turn back to the on position do this 3 times total. On the 3rd time switch the key off then start the vehichle. It may take a few trys of reprograming to get it to work it takes about thirty minutes to do.

Oct 08, 2013 | Cars & Trucks

1 Answer

I changed plugs and undone the throttle body with my battery plugged up now after all is back in place my car wont turn over or none of my electrical appliances are working is there a reset button or...


Usually to reset the cars system computer, you can disconnect the positive battery lead from battery for a few minutes. This may also clear your radio station presets as well.

Aug 24, 2013 | 2000 Mitsubishi Eclipse

1 Answer

Sunroof won't move back in response to the back button


faulty reverse switch or dirty running tracks

Mar 01, 2017 | 2005 Saturn VUE

1 Answer

My keyless remote stop working & i tryed the step and it only work once. please help


Synchronization
Turn ignition switch to position II. Turn ignition switch to position 0 and remove key. Within 1 minute: Press and hold key lock button. Press unlock button 5 times. Remote control should now operate system. If not: Repeat procedure.

Mar 26, 2010 | 2001 Mercedes-Benz M-Class

1 Answer

My van is over heating and i think my thermostat is bad.i need a location for were it is on the engine


The thermostat is located in the thermostat housing, which is mounted to the coolant crossover tube. The bypass hose is connected to the thermostat water inlet on one end, and to the intake manifold water outlet on the other. The thermostat is not located in the intake manifold water outlet, where the upper radiator hose is connected.

202a57a.gif
  1. Drain the radiator and recycle the engine coolant.
  2. Remove the upper radiator hose bracket bolt and remove the bracket.
  3. On 1993-98 3.0L engine models:
    1. Remove the bolt from the A/C high pressure line bracket at the front of the engine.
    2. Remove the two A/C accumulator/drier bracket bolts.
    3. Position the accumulator/drier and A/C line out of the way.

  4. Remove the bypass hose clamp and remove the hose from the water inlet.
  5. Remove the four water inlet bolts and remove the inlet.
  6. Remove the thermostat from the inlet.

To install:
  1. Clean and dry the water inlet and thermostat housing mating surfaces.
  2. Apply a continuous bead of RTV silicone sealant 0.08-0.12 inch (2.0-3.0mm) wide to the water inlet mating surface.



NOTE The water inlet must be installed within 5 minutes of applying the sealant.

  1. Install the thermostat in the water inlet, with the jiggle valve at the topmost (12 o'clock) position.
  2. Install the water inlet to the thermostat housing. Install the bolts and tighten them to 12-15 ft. lbs. (16-21 Nm).
  3. Install the bypass hose to the water inlet, using a new clamp.
  4. On 1993-98 3.0L engine models:
    1. Install the accumulator/drier and tighten the bracket bolts to 45 inch lbs. (5 Nm).
    2. Install the A/C high pressure line bracket and tighten the bolt to 45 inch lbs. (5 Nm).
    3. Install the upper radiator hose bracket and tighten the bolt to 34-48 ft. lbs. (46-65 Nm).




NOTE Allow the sealant to dry for at least 30 minutes before adding coolant.

  1. Fill the cooling system. Run the engine and check for leaks.

Sep 10, 2009 | 1999 Nissan Quest

2 Answers

Stereo dont work


You have to have a dealer or authorized repair facility contact the mfr to get the code. you will more than likely need proof of ownership.

Feb 27, 2009 | 2000 Volvo S40

2 Answers

Seat position


this might be a faulty preset sensor on the seat. which explains why the sterring wheel and mirrors work on preset but the seat doesn't

Aug 27, 2008 | 1995 Jaguar XJ6

Not finding what you are looking for?
2006 Volkswagen Jetta Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...