Question about 2004 Dodge Ram 1500

1 Answer

2000 Dodge Ram 1500, 3.76. Could you please tell me how a raidator would get messed up without being in an accident for a ram truck?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Dodge Master
  • 5,332 Answers

If its leaking out the tanks that is normal. Over time and thousands of heat expansions and cool down contractions it has to happen. The aluminum can also errode from both the inside and outside causing leaks. Typically at each end where the cooling tubes are joined to the end caps.

If it is misshapen somehow I would speculate that the truck was loaned out to a buddy who then said "hold my beer and watch this" which was then followed with a quick search for some used cosmetic parts that where quickly replaced?

Posted on Oct 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Dodge Ram 1500 Sport V8 Mag, it is over heating but I get a code of P done, could you please tell me where to start?


Dodge Ram 1500 5 9L Thermostat Removal Part 1 - YouTube

? 9:26
www.youtube.com/watch?v=eo6VW-wtGus
Aug 27, 2012 - Uploaded by RatchetsAnd Wrenches My Dodge Ram 1500 with a 5.9L engine had an over heatingissue which I was able to narrow down to the ...

Sep 30, 2015 | Dodge Cars & Trucks

1 Answer

My 2005 Dodge Ram 1500 had its timing chain break at the time of an accident?


You're going to have to get a second opinion by someone in person.
There is nothing you can do online.
If the collision managed to jam something into the front of the timing cover or lock up the crankshaft, I guess its possible.
But highly unlikely.

Feb 15, 2013 | 2005 Dodge Ram 1500

1 Answer

LfI have a code saying no bus, gages aren't working?


Hi,
I found this page in a dodge forum addressing this problem with testing procedures from dodge/chrysler corp.
http://dodgeforum.com/forum/dodge-ram-van/86523-error-code-no-bus-on-2000-ram-van-1500-a.html
Hope this will help, please rate this answer! Thanks, Mike

Jun 22, 2011 | 2000 Dodge Ram 1500 Truck

1 Answer

Where is my thermostat located on a 2000 dodge ram


Follow the top radiator hose to the engine. Where the hose meets the engine there is a cover with two or three bolts holding it to the engine, it is under there. Before you take it off, make sure the engine is cool and you have drained enough antifreeze out of it for safety and so you don't make a mess. Antifreeze is very toxic, so you want to avoid any spills

Jan 22, 2011 | 2000 Dodge Ram 1500 Truck

1 Answer

My 2000 Dodge Ram 1500 stalls out while I'm driving and a No Bus signal comes on the odometer reading. It starts again usually after a few minutes but how can I fix this?


i had a jeep that flashed that and wouldnt start i ended up replacing the pcm(engine computer) after checking the wire harness and connection if im not mistaken the pcm is in a place where it can be exposed to water so it might have water damage hard to tell without the truck but the bus signal is a state of health from the computer like a self diagnostic of it so without the signal it wont run hope this helps good luck

Aug 22, 2010 | 2000 Dodge Ram 1500 Truck

1 Answer

I have a 2000 Dodge RAM 1500 and have an


check to make sure the gasket is seated properly on the water pump... need to know where its from first

May 05, 2010 | Dodge Ram 1500 Cars & Trucks

2 Answers

2000 dodge ram 1500 ram brake lights do not work, cruise shut off not working from brake


You have a faulty brake switch under the dash. Look under the dash near the break pedal you will see a small switch that is depressed when the brakes are applied. Replace that switch. If there is now switch then you will need to have it replaced by a mechanic as it will be located somewhere in or on the master cylinder and that is something you most likely don't want to mess with.

Sep 12, 2009 | 2000 Dodge Ram 1500 Truck

1 Answer

Code p1389 on dodge ram 1500 slt 5.9 liter replaced computer due to p0601 now this code still doesn't start so where is it located?


The Auto Shutdown (ASD) Relay is designed to cut off your engine in case of an accident or rollover.

The PCM controls the ASD and I'm thinking that the new PCM isn't programmed properly.

This relay should be in the fuse box under your hood

Sep 10, 2009 | 2000 Dodge Ram 1500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...