Question about 1995 Toyota Tacoma
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Could be the lower control are bushing, it apparently is an issue with that model year. Big bucks (850 CDN$) to fix as the 'whole' front end needs to be partially dropped and both should be done at the same time. A mechanic should be able to see if that is a problem while the car is on the hoist. The mechanic should be able to point to the area or point where the contact is being made. Mine lasted till 100,000 km, I heard it on the second hand test drive ( at 90,00 km) and asked a buddy ( a Toyota Master Mechanic) about it and he made me aware of it; i bought the car anyways.
Posted on Mar 23, 2009
Likely your CV joint - this happened on my car on both sides. Sounds like crunching? Best to get it looked at before it explodes when turning like mine did!
Posted on Jun 05, 2009
There are 6 lube points on the drive shafts and u-Joints, check to see these are fully lubed. The drive line will "Klunk" when dry.
Posted on Jul 29, 2009
SOURCE: rear end clunking
If it is a rear wheel drive vehicle I would check the U joint for play and check the rear end by jacking up the rear end putting in neutral with front wheels blocked with motor turned OFF and turn the drive line slowly to find out if U joint or Ring and Pinion Gear or Spider Gears in the rear end are bad.
Posted on Aug 17, 2009
Tips for a great answer:
Jan 18, 2014 | Toyota Camry Cars & Trucks
Dec 04, 2017 | Cars & Trucks
May 18, 2012 | 1998 Chevrolet Tahoe
Mar 29, 2011 | Dodge Dakota Cars & Trucks
Apr 03, 2010 | 1990 Toyota Pickup
Apr 01, 2010 | 1990 Chevrolet Camaro
Feb 16, 2010 | 2004 Chevrolet Silverado
Dec 21, 2009 | 2008 Dodge Ram Pickup 1500
Jul 27, 2016 | 1995 Toyota Tacoma
24 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: