Question about 1992 Honda Accord

1 Answer

Fuel pump will not turn on - 1992 Honda Accord

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

If the fuel pump tests ok when jumped to battery voltage, but does not operate when plugged in and activated with the ignition key,replace the Main relay located on the driverside under dash mounted on the left kick panel. It is up inside and can be slightly difficult to reach. It will look like this;


fuel pump will not turn on - 6139324.jpg

Posted on Oct 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does the fuel pump relay don't click when i turn the key to run? and why there is no power at the fuel pump relay?


the operation of most fuel pumps is controlled by the fuel pressure regulator
when the fuel pump gets to set pressure , the pump is switched of by the ECM at the relay level
maybe nothing wrong with your system just the system working as designed
if you have pressure in the fuel manifold when you turn the ignition on then the pump will not run but will if there is a fuel leak somewhere and the pressure drops off

Oct 25, 2016 | Cars & Trucks

1 Answer

Periodic stalling after running for awhile . when the key is turned on no power to the fuel pump. After setting a few minutes key is turned back on there is power to the fuel pump and starts


The fuel pump only turns on for 2sec when key is turned on for a fuel pump prime. The fuel pump will turn back on during engine cranking. The most likely cause of stalling on this particular vehicle is a weak/bad crank sensor.

Apr 06, 2015 | 1996 Jeep Grand Cherokee

2 Answers

Fuel pump not always on


Did you reset the inertia switch that shuts pump down in case of collision?

Feb 18, 2012 | 2000 Mercury Grand Marquis

1 Answer

2000 mercury grand marquis 4.6 fuel


Voltage drop test the electrical circuit , do know how to do automotive electrical testing . Lose connection , resistance in the circuit , lose ground Mastering Voltage Drop Testing with Pete Meier and Jerry Truglia Testing Electric Fuel Pump Problems with Voltage Drop Test

Feb 27, 2017 | 2000 Mercury Grand Marquis

1 Answer

2000 mercury grand marquis 4.6 Intermittent problem. 35,000. miles. Problem engine died several times wile driving. Also after car is parked from a drive will not start. Found that the fuel pump is not...


I'd have to test when problem is ongoing. When you first turn on key, no crank, you should hear the pump run for a few seconds then stop. For initial prime, the computer doesn't need rpm signal. Engine cranking, the computer needs to see rpm signal or it won't ground the fuel pump relay. W/o rpm signal, no spark at the plugs and no fuel injector pulse. I know your talking about fuel, but, when problem is ongoing, check spark and fuel injector pulse, engine cranking.
Intermittent problems are a pain, have to test when problem is ongoing.
mercury fuel pump-i4kx0gxqalhdz4ok10irisui-5-0.jpg

Feb 27, 2017 | 2006 Mercury Grand Marquis

1 Answer

2000 mercurt grand marquis


Not guessing as to what the problem is , testing for voltage drop problems with a volt meter . posted a video on youtube yesterday . If your still looking for guesses forget it , no one on here could say for sure without testing the circuit an hooking up a scan tool to see if PCM is energizing the relay . Do yourself a favor an take it to a qualified repair shop . Fuel Pump Electrical Circuits Description and Operation If you can't learn how to test from this guy , better take to a repair shop .

Mar 01, 2017 | Ford Cars & Trucks

1 Answer

Car will turn over but won't start. Through the


No noise from fuel pump when you turn over the car .First thing get voltage at fuel pump relay checked, is there 12 volt to the relay.If no, then problem is again the relay.--------- To reconfirm the problem, try other test, that is remove the relay and by pass the relay terminals with a jumper wire .Then with 12 volt external battery give power to fuel pump connector and see, if the fuel pump starts, then its clear that fuel pump relay is faulty.----------- Also other problem can be fuel pump inertia switch.If the inertia switch is faulty then also fuel pump will not start.-------- The fuel pump relay on a 1995 Ford Explorer is in the power distribution
box, in the engine compartment, driver's side near the firewall.----------
The fuel pump inertia switch is in the right front passenger area
it is below the dash but above the carpet in the right hand corner.--------
Its a push button type inertia switch.
--------
Fuel Pump Activation
When ignition switch is turned to START position, PCM operates fuel pump relay to provide fuel for starting engine. PCM senses engine speed and shuts off fuel pump by opening ground circuit to fuel pump relay when engine stops or engine speed drops to less than 120 RPM. When ignition switch is in ON position, EEC power relay is energized (contacts closed). Power is provided to fuel pump relay and timer in PCM. Fuel pump receives power through fuel pump relay contacts.
Inertia Fuel Shutoff (IFS) Switch
All models use an electrical interrupt switch in fuel system. During a collision or vehicle rollover, electrical contacts within inertia switch open, shutting off fuel supply to electric fuel pump. Fuel supply is interrupted even when engine is running.
A reset button is located on switch assembly. If electrical circuit trips, vehicle will not restart until switch is reset. Fuel system should be inspected before resetting switch.
IFS switch is located under instrument panel, near right side of transmission hump.
----------- If the fuel pump relay, the inertia switch and fuel pump all checked ok, and fuel pump is working with direct 12 volt source to fuel pump.Then problem relates to computer.The computer (power control module, PCM) is faulty and has to be replaced.--------- This will help.Thanks.Helpmech.

Jul 17, 2011 | 1995 Ford Explorer

2 Answers

Why will my car turn over but won't start


COULD BE FUEL PUMP,CHECK FUEL PUMP FUSE AND RELAY. LISTEN FOR FUEL PUMP OPERATION IN FUEL TANK WHEN YOU TURN IGNITION ON POSITION YOU SHOULD HEAR FUEL PUMP RUN FOR 3 SECONDS AND TURN OFF.

Jul 05, 2011 | 2001 Chevrolet Malibu

Not finding what you are looking for?
1992 Honda Accord Logo

233 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...