Question about 1992 Toyota Corolla

1 Answer

Stop light globes

Hi how do you take the glass cover off to replace a stop light globe on a corolla marina 1992

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Remove the little scewy looking things that have plus signs on them. Please dont hesitate to ask for further help if you need it.good luck Buddy!

Posted on Jun 19, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do how 2008 getz stop light globe change


Hi there,

There should be a cover directly behind the light inside the tailgate., All you need to do is remove this cover and you will have access to the rear of the light socket. Twist the light out anti clockwise and the globe will come out. Refit in the reverse order.

If you find it hard try it this way >

holding the assembly together, and yes a screwdriver is what you will need along with a little pressure at each side once you have pried each joint to stop them from popping back together.

May 12, 2014 | 2008 Hyundai Getz 1.3

1 Answer

Replace park bulb.vt commodore


To replace the front parklight globe on a vt commodore can be a little tricky.

1.turn the lights on to see which 1 is inoperative once you know turn lights off.
2.open bonnet
3.go to side that is inoperative and on the back of the headlight you will see a round large plastic cover turn this to release it.
4.under the headlight globe there will be 2 wires flow these to the park globe socket gently twist and pull it out.
5.once the sockets out and you can see the globe ,pull the globe out of socket.
6.push new globe into socket
7.refit the socket in headlight
8.refit all trims
9.turn lights on make sure new globe is work..

Jan 22, 2014 | Cars & Trucks

1 Answer

Change front parking light


Hi, on the back of your car head light is cover to protect the globes remove the cover and you will see the head light globe and the parking light globe.

Jul 19, 2013 | Mercedes-Benz Cars & Trucks

1 Answer

How to replace headlight bulb in 1987 toyota camra


For an 87 specifically, I don't know the answer, sorry. There were at least 3 designs used in the 93-94 models alone. If it is anything like them, you have to either

- press in the plastic barb clip on the centre of the wiring connector at the back of the globe housing, and pull down on the wiring connector to disconnect it. Then rotate the globe holder anticlockwise and withdraw it. Don't touch the new globe glass with your fingers, or if you have, clean it well with metho. Then installation is in reverse. Or for a different design,

- alternatively, unplug the electrical connector. Then turn the hard plastic cover, at the back of the headlight globe holder, anticlockwise and remove it. Then remove the rubber cover underneath. If you are replacing an outer bulb remove the bulb spring clip, first taking note of how it is fitted. On an inner globe there may be a covering socket over the globe itself. Remove that, and the spring clip underneath. Replace the globe. Installation is in reverse, making sure all bits are in position, and the 'lock' mark on the hard plastic cover is facing upwards.

Nov 16, 2011 | Toyota Camry Cars & Trucks

1 Answer

The light on the auto shift inside my suzuki sidekick is out, at night you cant see where the reverse or any gear is at..how do i fix this


Sounds like the light globe has failed. To replace globe you will have o remove the cover over the shift lever to gain access to the globe socket. Once you have removed globe, replace it with the same type and wattage (usually 3 to 5 W) and then replace cover.

Jan 07, 2011 | 1997 Suzuki Sidekick

1 Answer

WHERE IS THE HEADLIGHT REPLACEMENT BULB LOCATED?


open the bonnet, locate a screw on top of the headlight and undo it, locate two screws between the centre grill and headlight and undo them and locate a screw right behind the headlight assembly and loosen it. Now the whole headlight should come out. It wont come all the way out. By unplugging the electrical plug you can take it out completely. Lift up the lock thats hold the rear headlight cover and that will expose the internals of the headlight and then you can change whatever globe you want. First disconnect the wiring plug from the globe and then release the clip holding the globe and replace the globe and make you sure you dont touch the glass part of the new globe which installing. Touching it will shorten the globes life and there is a chance that it might explode inside and create mess.

Nov 19, 2010 | 2000 Mercury Cougar

1 Answer

Lo beam headlight replacement passenger side


open the bonnet, locate a screw on top of the headlight and undo it, locate two screws between the centre grill and headlight and undo them and locate a screw right behind the headlight assembly and loosen it. Now the whole headlight should come out. It wont come all the way out. By unplugging the electrical plug you can take it out completely. Lift up the lock thats hold the rear headlight cover and that will expose the internals of the headlight and then you can change whatever globe you want. First disconnect the wiring plug from the globe and then release the clip holding the globe and replace the globe and make you sure you dont touch the glass part of the new globe which installing. Touching it will shorten the globes life and there is a chance that it might explode inside and create mess. You need to buy H7 type globe for low beam.

Nov 10, 2010 | 2000 Mercury Cougar

1 Answer

1990 Toyota Corolla Hatchback no stop lights


check the switch on the break pedal,replace as necessary.

Jan 18, 2010 | 1990 Toyota Corolla

1 Answer

2001 Corolla S only brake lights in back do not work window does


change the globes they may look alright but probably wont be or if you have a circit tester check to see if power getting to globe connecter but i reckon your globes

Jul 27, 2009 | 2001 Toyota Corolla

1 Answer

Left Brake light Globe fuses tazz 2000(New Shape)


Make sure you have the appropriate light bulb and fuse. Otherwise it has to be an intermittant short.

Oct 27, 2008 | 2000 Toyota Corolla

Not finding what you are looking for?
1992 Toyota Corolla Logo

Related Topics:

69 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...