Question about Hyundai Accent

2 Answers

My hyundai gets dashboard has started getting sticky (melting) , please advise solution

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    Visited the website for 3 consecutive days.


    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 13 Answers

When a Plastic starts to get sticky and oily, it is at the total melting condition. The more you clean the more sticky it will be. STOP cleaning, the plastic will eventually wipe off leaving the base cover. You can only treat the plastic to stop the sticky and oily surface. This will prolong your dashboard life span. Use the sticky melting solution conditioner it will stop the sticky and oily condition. Home

Posted on Dec 09, 2015

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

Sounds like someone used solvent cleaner...only thing you can do is clean fresh water and vinyl cleaner.if it turns grey then you may have to use vinyl paint to get it back to its original finish.

Posted on Oct 14, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Blowed head gasket on Hyundai elantria head checked out ok put back together now won't start motor got hot enough to melt plug wires and radiator my daughter's care

You forgot to fill the cooling system didn't you? Or at best, you didn't 'burp' the system and get the air out. Perhaps not enough oil, which also cools?

If it was hot enough to melt the plug wires on the outside I dread to think what the valve or pistons look like. If it melted plastic on the outside, it must be hot enough to melt metal inside.

Dec 07, 2015 | Hyundai Cars & Trucks

1 Answer

Sticky dashboard and steering air bag cover when exposed to the sun.

The plastic technology is only up to a certain level of with standing the heat. It will eventually becomes sticky and Oily. The only way to stop the plastic from further degrading is to treat the plastic and Not Clean it. By Cleaning, the condition will get from Bad to worst and eventually wipe off the whole plastic surface. By treating it, the plastic will no longer be sticky and oily and hence prolonging the life span of the Plastic. Use the Conditioner from the sticky melting solution dot com that can stop the sticky and oily surface within an hour. Home

Mar 20, 2013 | Cars & Trucks

3 Answers

The dashboard in my 2009 toyota camry hybrid is disintergrating. has anyone else had this problem. the car has 31,000 miles on it and the dealership refuses to warranty it.

this is a common problems among cars, it just happen toyota got alot more sticky melting problem. your solution is in the youtude under treatment for sticky melting solution.

May 29, 2012 | 2009 Toyota Camry Hybrid

1 Answer

The plastic in the console is sticky like its melting. how do I fix melting plastic.

sticky melting condition now can be easily treated, found this out on the youtude ;-

Jan 07, 2011 | 1999 Honda Accord

3 Answers

Hi, My GETZ dashboard has become very sticky, how to resolve this issue?

Hi. I am having a Getz GLS and faced similar problem I looked for a solution and at last got it resolved myself and that too PERMANENTLY. IF you want to check out, them mail me to Now my car dash board is absolutely normal. Stickiness gone for ever. If you are in Kolkata, I can also show you my car.

Sep 30, 2010 | 2000 Hyundai Accent

2 Answers

Getting fire but fuel pump aint running

Check the fuel pump relay/fuse.

Circuit Protection The fuse box is located low on the left side of the dashboard behind a cover, or at the left side kick panel, behind a cover.
Fusible links are located in a holder next to the battery.
The fuse panel is located behind a snap-off cover in front of the driver's left knee.
Fusible links are sections of wire, with special insulation, designed to melt under electrical overload. Replacements are simply effected by removing the old unit and inserting the new into the block. Fusible links are identified by the color of their housing.

Also, your fuel pump may be bad. Check the fuse/relay first.

Dec 07, 2009 | 1992 Hyundai Excel

1 Answer

Cannot get dashboard off to remove head unit

two more phillips screws in the valance around the instrument cluster (upper underside of the valance) have to be removed.

May 13, 2009 | 2001 Hyundai Accent

3 Answers


Try they can repair the renault megane scenic dash and the renault espace instrument cluster for £140 inc postage and only takes 2-3 days. Their number is 07970 075414.

Jan 08, 2009 | 2004 Renault Sportwagon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts


Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides