Question about 1992 Nissan Stanza

1 Answer

1992 nissan stanza my lifters need replacement or to be adjusted how can I adjust them. I just replaced the battery and now at the store and my car wont turn over is a problem with the lifters or the battery

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Nissan Master
  • 1,455 Answers

The lifters have nothing to do with the battery being changed. They are hydraulic lifters so there's no way to adjust them. Check your starter if the engine won't turn over.

Posted on Oct 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace cv joints on a 1985 nissan stanza


It's better to buy a manual. find them at you local auto part store. There isn't enough space in here to explain. I've replaced stanza cv before, just be careful, For your safety use jack stands.

Feb 12, 2016 | 1985 Nissan Stanza

2 Answers

How many torcs for a 92 nissan stanza head gasket


Most NAPA auto parts stores can tell you this

Aug 02, 2012 | Nissan Stanza Cars & Trucks

1 Answer

How do i replace a fuel pressure regulator in a 92 stanza


1992 NISSAN STANZA FUEL PRESSURE REGULATOR REPLACE

Relieve fuel pressure (See procedure below). Remove air duct. Remove accelerator cable bracket. Remove vacuum hose from regulator. Remove fuel return hose from regulator. Remove screws and regulator. Reverse procedure to install.

RELIEVE FUEL PRESSURE
Disconnect fuel pump relay (See Diagram). Start engine and hold at 1600 RPM until engine stall. Turn ignition switch off. Allow engine to cool completely before performing any fuel system repairs.



2_29_2012_2_04_50_am.gif

Feb 28, 2012 | 1992 Nissan Stanza

1 Answer

Firing order 1992 nissan stanza


1992 Nissan Stanza 2.4 liter DOHC L4 (KA24DE)

zjlimited_27.gif


Hope this helps (remember to rate this).

Nov 11, 2010 | 1992 Nissan Stanza

1 Answer

I have a 92 Nissan Stanza that won't run. I have replaced the coil and resister. It won't even turn over. Any suggestions?


if it will not turn over it is either a problem with you battery or your starter the celluloid on the starter could be bad may also be a fuse either under the dash or hood check anyone to do with starter or ignition

Sep 18, 2010 | 1992 Nissan Stanza

1 Answer

My 1992 nissan stanza has low idle while idling. how do i adjust the idle


If it has fuel injection it cannot be adjusted.
If it has carburetor then one can turn a screw on the carburetor, but I think that your 1992 Nissan has fuel injection (electronically controlled idle).

Jul 04, 2010 | 1992 Nissan Stanza

1 Answer

Datsun stanza 1980 tappets (lifters)


This car has hydraulic lifters( tappets} therefore should not adjustment, you probably have a bad or weak lifter. But, in any case you have to remove the valve covers to make the adjustment. You will see the adjustable bolt on the rocker arm. rotate the engine until the valve is all the way to the top, [no tension on the valve spring] then place a feeler Gage in between the rocker arm and the valve stem, adjust the rocker arm until the feeler Gage is snug but not tight. Do this with each valve. Check the book for the correct Gage to use but I think it is a .018.

May 15, 2008 | 2006 Datsun Stanza

Not finding what you are looking for?
1992 Nissan Stanza Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...