Question about 1993 Dodge Dakota

1 Answer

What is 3 5 5 code on 1992 dodge dakota - 1993 Dodge Dakota

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,272 Answers

The error code 355 is related to coil problem. 355 means Coil wire number 5 is not reaching peak current at the right time.The ignition coil has to be removed and checked.The connection between spark plug wire and coil needs to be checked. ------------ Keep updated if any more queries.Thanks.

Posted on Oct 14, 2010

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
hondaman900
  • 40 Answers

SOURCE: serpentine belt on 1992 dakota

You don't mention which engine you have in your '92 Dakota, but it's likely the 3.3L and if so, here's the diagram. Even if your engine is not the 3.3L the principals for replacing the belt are the same.

Get a serpentine belt tension release tool (local parts store) and use it to take the tension wheel away from the belt, which will make it loose enough to remove by simply pulling it off one of the pulleys (the alternator will be easiest) and then wiggle it out of the engine bay. The tool should come with a selection of heads for the different variations of tensioner arms/bolts. Once the belt is removed, replacing it is the reverse process.

Hope this helps, and please rate my answer.

2e5cb67.gif

Posted on Jan 08, 2009

  • 2427 Answers

SOURCE: radio wiring troubles for 1992 dodge dakota le

hmm well there are 2 solutions to this that i can give cause i dont have the wiring diagram for that truck..

The first would be to set with a multimeter and test the wires under the dash for the hot, and axcessories wire.

The second would be to run 2 wires directly from the battery to the inside of the vehicle and connect the radio using that.
The second solution is self explained so lets discuss the first.

The truck came with an original radio. connected to this raid is a jack with a bunch of wires. remove the connector. with keys out the ignition test every wire until you get 12V.. thats your hot wire. this wire always has power. Now lable that wire and push it aside. turn the ignition on and test the remaining wires until you get 12v .. thats the ignition wire or acesories. this only has power with the ignition on. The remaining paired wires are for the speakers. connect the new deck and vonnect the wires one pair at a time to determine their location. or ypu can look at the wires connect directly to the speakers to see which wires go to which. .. you can use the body of the truck as a ground.

Posted on Apr 02, 2009

  • 290 Answers

SOURCE: I have a 1992 Dodge Dakota. When the A/C is

V6 engine? If so, there is a small plastic vacuum tube that runs from the blend door actuator under the dash to a connector in the engine compartment. The tube goes thru the fire wall about 5 inches above the throttle cable (right under the heater core tubes). The tube runs about 10 inches (behind the intake manifold) to a vacuum tube that tee's off the right side of the intake.

My tube was broken....dealer and NAPA did not have a tube that small but had one that fit over it for a quick splice.

Posted on Jul 06, 2009

  • 296 Answers

SOURCE: 2001 dodge dakota 4.7 liter engine codes

Auto Zone will do a free code read and tell you what they are

Posted on Mar 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1992 dodge dakota no spark


Did you do a fault code test to see if anything shows up that might explain the no spark? The ignition control module is part of the ECM in this truck you might have a defective circuit.

Oct 10, 2016 | 1992 Dodge Dakota

1 Answer

1992 dodge dakota wont stay running


Have you checked base fuel pressure with a gauge ?
Code 42 is a problem with the fuel pump relay or ASD relay circuit.

Jun 22, 2013 | 1992 Dodge Dakota

1 Answer

94 dodge dakota codes 12-55 is coming up


are you flashing the codes by watching the dash light or using a code reader.code 12 is the indicator that tells you the code sequence is starting and code 55 is the indicator code that tells you its the end of reading the codes.if you don`t have any codes in between then you have no codes in the computer.

Jun 24, 2011 | 1992 Dodge Dakota

1 Answer

I have a 1992 dodge dakota with a 5.2 V8. My question is, when the engine is warm, it sometimes stalls at idle when in gear. Could the temp. sensor be at fault? It's not setting any codes to check. Thank...


idle air control valve. This part is gummed up. remove and clean with spray carb cleaner and a old tooth brush. clean the bore it came out of as well.

Sep 09, 2010 | 1992 Dodge Dakota

1 Answer

Replaced timing change on a 1992 dodge dakota set the number one piston tdcbut when dialed in its at the #6 position what do i do.


#6 on a V8 is BDC on exhaust stroke.

Don't forget your working on a 4 cycle engine.

1-8-4-3-6-5-7-2

May 20, 2010 | 1992 Dodge Dakota

1 Answer

Where is the windshield wiper fuse for a 1992 dodge dakota?


what number is the brack fuse go in on my 92 dakota

Apr 13, 2010 | 1992 Dodge Dakota

1 Answer

Heater control valve


Where is the thermostat in a dodge dakota 1992 located? Flushed it yesterday still just have heat blowinf ti side vents rather cool windsheild defrost. Maybe there is another problem?

Nov 19, 2008 | 1992 Dodge Dakota

1 Answer

1992 Dodge dakota


you have a bulb out or your relay is shot

Oct 07, 2008 | 1992 Dodge Dakota

Not finding what you are looking for?

Open Questions:

See all 1993 Dodge Dakota Questions

1993 Dodge Dakota Logo

Related Topics:

627 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...