- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would say you are pretty close as far as cost is concerned depending what garage or shop is doing it as you have to purchase the parts and motor maybe plus the labor. could be more as i was quoted about four hundred for my Lesaber
typically thats about right give or take a few thousand to replace the belt and the pulley will cost you around 12-1,500 give or take a few hundred. this depends on the labor rate of the shop that does the work. my shop is 85 dollars an hour.
A transmission shop would cast about 1 hour labor plus the parts. Labor cost is around $75.00 an hour here, and the Reman CV joint with the core exchange is around $80.00 and without the core exchange $160.00. Hope this helps.So best i can give you an average $225.00 but call around a reputable transmission shop, since they work on this type of repair all the time. Good luck.
you have mcphereson struts not shocks, you will need new struts, labor plus alignment, Struts will run about $130 each, labor about $100 per side, alignment about $65.00 - about $ 500 .00 bill for total job...