Question about 2000 Buick LeSabre

1 Answer

I have a 2000 buick le sabre. leak from pipe coming out of engine block, going to the heater hose.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 266 Answers

THE PIPE THAT COMES OUT HAS A BOLT HOLDING IT IN AND HAS AN ORING ON IT PULL IT OUT AND CHANGE THE O RING

Posted on Oct 14, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 buick le sabre and the heater sometimes works and sometimes doesn't


Sounds like the heater matrix is blocked hence you have a little heat until you turn the blower on whereby it comes out cold because there's no more. Get someone to check the temp of the heater hoses when running and check for an airlock in the heater. These can be tricky to clear. Make sure the coolant is full at all times.

Nov 19, 2014 | Buick Cars & Trucks

1 Answer

Where can i find a ground in the trunk of my 1997 buick le sabre


Ground Wire?

Your entire body,all fluids, engine block,trans
etc, are at ground potential

Electrons (Amps/Current) travel thru the body
& return to the Battery on the wires.

All Black Wires are grounds
All come from the Battery Negative Post

Jun 12, 2011 | 1997 Buick LeSabre

1 Answer

How do i bypass the heater core on a 97 buick le sabre


Ok to eliminate having heat in your vehicle and/or replacing a damaged heater core unhook both the 5/8" id hoses going to your heater core then remove them and connect a hose between both outlets to loop them. Newer replacment water pumps have interchangeable outlet fittings which can be removed and plugged with a pipe or drain plug if applicable the same as with your water neck fitting. Connecting the 2 together is a much easier fix

Dec 10, 2010 | 1997 Buick LeSabre

1 Answer

Heating coil gone water leaking inside of car need to find hose to block water from getting into car was told to plug hose that is putting water into car don't know which one to cut and plug.


What you have to do is unhook the heater core and loop one of the hoses. Go in the engine compartment and unclamp the 2 hoses from the heater core at the firewall [1] in below picture. Also unclamp one of the hoses at the engine, and circle the other hose back onto that pipe, so that one hose is no longer used but the second hose goes from the engine right back to the engine. Let me know if you have questions.
1fa4a5c.gif

Oct 08, 2010 | 1993 Buick LeSabre

1 Answer

Where's the fuel filter on 2000 Buick Le Sabre and how to replace


release the pressure firs like take gas cap off there are some speacil tools called quick release tools some people just use a small screwdriver to pop it off it should be on driver side by the drivers door under neath the car if its a four door this driver door im talking about

May 14, 2010 | 2000 Buick LeSabre

2 Answers

Where is the power steering resvoir located on a 2000 buick lesabre


standing on the the passenger side of the engine compartment, it's located towards the firewall, below the alternator. use a flashlight, it's difficult to see. you'll have to use a long funnel to fill.

Apr 15, 2010 | 2000 Buick LeSabre

1 Answer

200 2.0 jetta cooling system diagram. i have a leak on a metal hose that goes into block left side of engine. how do i fix?


The metal pipe you are talking about is a heater pipe. it carries coolant around the block. i would just buy a new pipe and replace the old one. if you use epoxy or something its probably going to leak. there is a bracket built into the pipe and its screwed to the heater hose flange on the side of the motor. once you remove the two nuts you should be able to take a prybar and pry it from the block. (Its just pushed into the block and sealed with an o-ring)

Aug 06, 2009 | 2000 Volkswagen Jetta TDI

1 Answer

Pipe going to water heater hose leaks at engine block


it is a quick hose conecter . the conector needs to be replaced . not a easy job because they tend to break off in the engine . you may want to take it to a shop

Jun 02, 2009 | 1994 Oldsmobile Bravada

2 Answers

I have a water leak coming from my engine block. How to repair 2001 Buick 3.8 It is come out of a 5/8 pipe or around it


If it's a hose, best bet is to just replace it, and use new clamps.

If it's leaking where it's connected to the nipple, for a quick fix, you can remove the hose, cut the hose off past the leak, and reattach it.

This requires a little bit of slack in the hose, but if the leak is right at the connection, there should be enough slack in the hose to do this.

May 05, 2009 | 1998 Buick Riviera

Not finding what you are looking for?
2000 Buick LeSabre Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...