Question about 1992 Chrysler New Yorker

1 Answer

I have a 1992 chrysler new yorker, it will not go over 40 miles per hour, is that a transmission problem?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 6,826 Answers

OK, if the engine is overspeeding at 40 mph and won't rev any higher, then I would say the transmission is not up shifting to higher gears. A solenoid blocked up or defective may be the problem. I would then have the transmission replaced or rebuilt to solve the problem.

If the engine is not overspeeding, then I would look at the engine itself not providing enough horse power for the transmission to up shift in the first place.

Good luck on this repair.

Posted on Oct 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

91 chrysler new yorker will run the shut off and will restart latter on and do it aging


Camshaft position sensor? Good call but not close. The crankshaft position sensor.This is located on top of the transmission bell housing.

Feb 29, 2012 | 1991 Chrysler New Yorker

1 Answer

Speed sensor 92 new yorker


its located on the top of the trans axle/transmission on the side where the passenger side axle leaves the unit.it will be back from the end where the axle joins it about 3-6" and will have a 2 wire plug connector attached to it.

Nov 09, 2011 | 1992 Chrysler New Yorker

1 Answer

I have a chrysler new yorker 92 . i was driving and the gass petal wouldnt accelerate the trans. Then it will kick back in after pressing a couple times. Friend said to try trans. filter first.


Your transmission is slipping and most likely failing. You could try getting fluid and filter changed. But these cars are notorious for the trannys going out. Sorry. Im sure mine will bite the dust soon.

Apr 06, 2011 | 1992 Chrysler New Yorker

1 Answer

Does the 1992 chrysler new yorker have a transmission sensor?


What type of sensor do you mean? I don't think it has sensors like a more modern transmission as far as the VSS, for instance, because it has a speedometer cable in that place and bands.

I think the 1992 Chrysler New Yorker had an older style transmission that didn't use a computer sensor as far as I read, anyway.

Does that answer the question?

Oct 08, 2010 | 1992 Chrysler New Yorker

1 Answer

Transmission will not shift out of second gear. Cannot drive on freeway as I cannot drive this car over 45 miles per hour.


If flushing the transmission fluid doesn't help (and I'm sure it won't), replace the transmission.

Oct 15, 2009 | 1991 Chrysler New Yorker

1 Answer

Unable to locate turn signal flasher as described in book on 1992 Chrysler New Yorker


it is located under right side of dash in relay block with other relays graphic.aspx?mod=reptiff&module_id=1&session_id=%7badf7bd31-e900-4299-9d07-860c3f52be69%7d&image_guid=90e04302&print_bw=0&

Oct 02, 2009 | 1992 Chrysler New Yorker

1 Answer

Location of crank sensor on 1992 Chrysler New Yorker, 3.3 L, V-6


You crakn sensor is located in your transmissions bell housing on a chrysler 3.3.

Apr 23, 2009 | 1992 Chrysler New Yorker

1 Answer

Need to find the backup light switch on a 1990 new yorker


There are 2 switches on the transmission,one is a nuetral safety switch and the other for the reverse lights,but there may possibly be a relay involved with the reverse lights also.

Apr 12, 2009 | 1992 Chrysler New Yorker

2 Answers

1992 Chrysler New Yorker transmission won't shift out of first gear.


Hi,

i had the same problem like drushlow in my Eagle Vision, wich has the same engine and transmission. Your transmission is going into safety mode wich allows you to go on but just in 2nd gear. The Problem in my car was the EGR Valve. In other words the engine had a problem and the transmission swiched into safety mode to make sure the engine don´t get any more damage. So i´m very sure your transmission is still OK but there is only one way to find out what is wrong. Drive to a chrysler dealer and read the errror code (that only cost you 20 to 40 dollars). After that you know what´s wrong and can decide what you wanna do.

Oct 25, 2008 | 1992 Chrysler New Yorker

Not finding what you are looking for?
1992 Chrysler New Yorker Logo

426 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...