Question about 1998 Plymouth Grand Voyager

1 Answer

How do I get the inside door panel off of the slider door on the drivers side?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,088 Answers

The door must be closed to remove the panel unless you remove the whole door from the car (not recommended). Take the nearby seat out so that you can get to the rear of the door and work comfortably. Use a two-pronged-fork tool (available at an auto parts supply) to work the panel mounting points loose (plastic buttons that clip into the panel and are pushed into holes in the door metal). Buy a bag of spare buttons from the store because some of these things break rather than release. Remove any trim that obstructs the removal. There may be a paper or plastic seal to remove after the panel is off. Replace it after your repairs. Hope this helps!

Posted on Oct 13, 2010

Testimonial: "Thank you! That clears up a couple of questions!"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2007 F150. I have a short in the door lock circuit drawing over 8 Amps. Looking for a electrical drawing for the door lock circuit.


You have short in a wire going to the security module. I assume you have a power slider. Remove the plastic cover on the rocker panel on passengers side. The wiring loom is probably soaking in water from your slider leaking. One of the wires will be corroded. Easy fix! Usually you can tell by looking or moving around. Run a new wire from fuse box to module. Figure out which one of the wires running from fuse box to the security module are bad. The module is located on the back panel under slider on the drivers side.

Oct 13, 2014 | Cars & Trucks

1 Answer

Drivers side slider on 2001 Ford Windstar is jammed. How canI get it to open?


The door lock is not working. Operate the remote keypad, the driver's armrest door lock switch, and the overhead switch until you hear the latch work, then open the door. If this approach fails, 10A FUSE 11 in the central junction box may be open or the rear electronic module may have failed. Once you have the door open, apply WD-40 to the mechanical parts of the latch to prevent future problems.

May 07, 2017 | 2001 Ford Windstar

1 Answer

The lock has fallen inside the driver's side door


Here is a common way to remove your door pannel:

1st, find the screw that is attaching the inside door handle (looks like an armrest) to the door panel. remove this screw. there is also a screw located at the door lever (the device you use to open the door from the inside). remove this screw. after this, slide your door panel up to remove it.

Aug 10, 2011 | 2007 Chevrolet Aveo Sedan

1 Answer

The lock on the driver side sliding door was stuck unlocked. Now it stuck locked.


you should clean the locking mecanism and then lubricate with WD40. If this is a van, my van has a sliding power door on the pass side and a manual slider on the drivers. alot of times the drivers locks and dont lock like it has a mind of its own but it always works with the drivers controls. and then the next time i dont think about it and it works. now it also has child proof locks on them, a little plastic lever you slide up and down as to put in a lock position so child cant open from inside and down to allow door to open from inside. double check this. it wont unlock with the key or power? you might have to take off inner door panel to manually unlock this and get it lubed

Jan 14, 2011 | Dodge Grand Caravan Cars & Trucks

1 Answer

How do I take off the drivers side door panel in a


a few hidden screws then pop the plastic plugs off the door with that special snap-on door panel removal tool.

Jun 02, 2010 | 1988 BMW 3 Series

1 Answer

Two of my door locks will not unlock w/ remote or inside button.


The door lock actuators or 'solenoids' have failed. This seems to be pretty common on Windstars - I've just replaced a couple on my '02. (Ironically, the original batteries in the remote fobs are still going strong, they lasted longer than the actuators). You can buy third party replacement parts, the front door ones are 'handed' driver & passenger, but a common part will work for both sliding doors. I don't have instructions for removing the door panels, but search online - it's not tricky. The original actuators are riveted in place - you'll need to drill out these rivets. The new actuator can be held in place with a nut, bolt & couple of washers. Replacing these parts isn't too difficult - the first one took me about 1.5 hours, but once I knew what I was doing, the second one took about 0.5 hours. Good luck.

Oct 29, 2009 | 2001 Ford Windstar

1 Answer

Drivers electric window suddenly fell down inside of door


thw window either came off the window slider or the slider bracket, this can be determined by removing the door panel. this could also be cable driven and the cable has disconnected or broke, can also be determined by removing door panel.

Oct 01, 2009 | 2001 Volkswagen Golf

1 Answer

Remove door panel


Remove the screws and lift up. There aren't any screws behind the window switch, it is screwed on from behind. There is a hidden screw behind the lock slider.

Mar 01, 2009 | 2000 Chevrolet Silverado

2 Answers

Interior lights won't turn off 1999 BuicK LeSabre.


try jumping the drivers and passenger side door switches -jeff

Jun 29, 2008 | 1999 Buick LeSabre

2 Answers

Door panel removal


I replaced the passenger side mirror on my 1998 Bonneville.
(Thanks to VWmechanic for his helpful post re a 1997 Bonneville; my '98 was a little different.)
First, remove the door panel, as follows:
1. Remove hex-head screw under inside door handle.
2. Remove 10mm screw located under armrest hand grip (to get at it, pop off the piece that covers the tiny courtesy light)
3. Using a screwdriver, pry off the panel. It's held on by several plastic, pop-off fasteners.
4. Remove the plastic red lock slider under the door handle. It can be pried off the wire slider.
5. Lift up on the door panel to release the top edge. You now have access to the inside of the door.
6. To get at the two bolts holding the mirror to the sheet metal of the fender, remove the plastic shield just under the bolt location.
7. Remove/fasten the mirror bolts with a 10mm. I could reach the front bolt with an 8" socket extension, but had to use a 10mm open wrench on the back bolt.


May 28, 2008 | 1997 Pontiac Bonneville

Not finding what you are looking for?
1998 Plymouth Grand Voyager Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...