Question about GMC Yukon
This is an easy TSB.From the dealer these little puppies have had a huge problem with the rear door lock actuators failing.That's what you are going to need.This part runs about $68 and yes.........you can only get it from the dealer.They have made a revised part that is strengthened on the axis of the gear itself, (that's where it always fails).This is an easy repair, and should take you about an hour total time (that includes pulling off the panel and putting it back on) I hope I could help, Rate me accordingly, Thanks!!
Posted on Oct 14, 2010
Hi! THe liftgate locks not working anymore? This is just an actuator problem. The liftgate's lock actuator surely is faulty, it can be stucked. You will need to replace it for it to work normally again. Hope this helps and thank you for using FIxYa!
Posted on Oct 13, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
The body control module (BCM) commands the horns on. The BCM commands the horns on under either of the following conditions:
When the content theft deterrent system detects a vehicle intrusion. For further information, refer to Content Theft Deterrent (CTD) Description and Operation in Theft Deterrent.
When the panic button is depressed on the remote control door lock transmitter. For further information, refer to Keyless Entry System Description and Operation in Keyless Entry.
When the OnStar?® system is used to sound the horns, if equipped. For further information, refer to OnStar Description and Operation in Cellular Communications.
When the keyless entry system is used to lock the vehicle, a horn chirp may sound to notify the driver that the vehicle has been locked. The notification feature may be enabled or disabled through personalization. For further information, refer to Keyless Entry System Description and Operation in Keyless Entry
Jun 22, 2016 | 2003 GMC Yukon XL 1500 SLT
Rotate the key from the center to the unlock position.
Press the horn button on the remote keyless entry transmitter.
Count the number of chimes that you hear. The number of chimes tells you which mode you have set.
Press the horn button again in order to change the mode. Continue to press the button until you hear the number of chimes that indicates the mode that you want.
Turn the key back to the center position and remove the key from the door key cylinder.
In order to exit and save the current feature customization modes use the following procedure:
Aug 25, 2015 | Cars & Trucks
Aug 04, 2015 | Saturn Cars & Trucks
Jan 30, 2014 | GMC Cars & Trucks
Nov 12, 2013 | GMC Cars & Trucks
Jul 20, 2017 | 2005 GMC Yukon
Jul 08, 2011 | 2005 Chevrolet Equinox
Sep 12, 2010 | 2007 GMC Yukon Denali
May 12, 2009 | 2006 Honda Civic Hybrid
152 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: