Question about 2003 Kia Sedona

Open Question

Need torque specs for 2003 kia sedona outer tie rod end bolts

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Need torque spec for 2000 Cirrus outer tie rod ends

45 Ft-lbs Tie-rod balljoint stud-to-steering knuckle nut, and 55 Ft-lbs Tie-rod (outer)- to- inner jam lock nut

Posted on Apr 21, 2009

johnny5846
  • 379 Answers

SOURCE: what are the torque specs for the head bolts for a 1999 sportage

hi bob
head torque on the 2.0 DOHC is 64 ft lbs , done in two -three steps , also there is a sequence for proper order . here is a very good description with graphics .

1999 kia sportage 2.0 DOHC head torque

Thanks for using FIX YA !

J5

Posted on Jan 24, 2009

  • 1 Answer

SOURCE: what are the torque settings

stage 1 20nm
stage 2 40nm
stage 3 60nm
stage 4 80nm

Posted on Apr 27, 2009

  • 36 Answers

SOURCE: Torque for tightening Valve cover bolts on Kia Sportage 95

The gasket has metal torque limiters.use your own judgement just dont break the bolts

Posted on Jul 27, 2009

  • 2002 Answers

SOURCE: torque spec's: 75 nova steering components

I looked in an old Motor book, competitor to Chilton, and it gives no special torques or instructions for front end parts. It just says tighten.From experience I always tightened them with a 3/8 socket wrench until they stopped turning using just my arm strength. Never loosen to put in a cotter pin. Hope this helps.

Posted on Sep 10, 2009

Testimonial: "75 nova dude: problem solved THANKS!! to hippycy"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque for inner tie rod end on a 2000 for focus


59 ftlbs

Hope this will answer your question,If do pls click on helful botton and you can follow me at fixya,so I can answer your question faster.thanks.

Mar 10, 2015 | 2000 Ford Focus

1 Answer

What's the outer tie rod end torque specs for 2000 Dodge Dakota sport ?


this was copied off of the following link. should be same torque requirments-
this is off a 2004 manual,which should be real close if not exact

INSTALLATION
1. Align reference marks and install pitman arm.
2. Install the lock washer and retaining nut on the pitman
shaft and tighten nut to 251 N·m (185 ft. lbs.).
3. Install the drag link (1) to the pitman arm (5). Install
the nut (4) and tighten to 54 N·m (40 ft. lbs.) Then
an additional 90°.
4. Remove the supports and lower the vehicle to the
surface. Center steering wheel> and adjust toe,
(Refer to 2 - SUSPENSION/WHEEL ALIGNMENT -
STANDARD PROCEDURE).
5. After adjustment tighten tie rod adjustment sleeve
clamp> bolts to 61 N·m (45 ft. lbs.).
NOTE: Position the clamp on the sleeve so retaining
bolt is located on the bottom side of the
sleeve

got it from here -

Tie rod end torque spec DodgeTalk Dodge Car Forums Dodge Truck Forums and...

Feb 23, 2015 | Dodge Cars & Trucks

1 Answer

Torque specs for outer tie rod end and stabilizer bar end link for 2007 dodge durango...


There is no torque setting here. Tighten your bolt till tight, then go enough to install the cotter pin. Install pin, bend ends of pin, and your done. GOOD LUCK FRIEND.

Nov 12, 2014 | 2007 Dodge Durango

1 Answer

Torque specs 2003 kia sedonna rocker arm


Tighten the bearing cap in two or three steps. Tighten it to the standard torque at the last stage. *Bearing cap standard torque Torque16 pieces at the both ends : 18.6 - 20.6 N·m(190 - 210kg·cm, 13.7 - 15.2 lb·ft)24

Jun 16, 2014 | 2003 Kia Sedona

1 Answer

2006 grand caravan sxt 3.8 liter outer tie rod torque specs needed please.


Hello billmarks: My name is Roger and I will help you. The torque specs for the tie rod lock nut and the tie rod spindle nut is 55 foot pounds. Should you need further help please just ask.Please rate the answer. Thank You for using Fix Ya. Roger

Sep 08, 2010 | 2006 Dodge Grand Caravan

1 Answer

I need to change out the camber bolts. and i cant find the torque specs. can you help


CAMBER BOLT ON THE TIE ROD ENDS.YOU NEED A HAYNES REPAIR MANUAL TO GET THE TORQUE SPECS.YOU PROBABLY NEED WHEEL ALIGNMENT WHENEVER YOU REMOVE TIE ROD ENDS OR UPPER AND LOWER BALL JOINTS IT WILL ALTER WHEEL ALIGNMENT.

Jun 10, 2010 | 2006 Nissan Titan

1 Answer

Nut Torque Specification Guide 2004 Kia Sedona front wheel hub assembly


Lower ball joints. Tighten the pinch bolts to 69-85 ft. lbs. (93-115 Nm). Outer tie rod ends. Tighten the nuts to 43-58 ft. lbs. (59-78 Nm). Sway bar links. Tighten nuts to 69-85 ft. lbs. (93-115 Nm). Hub retaining nuts. Tighten the hub nuts to 177-199 ft. lbs. (240-270 Nm). Front wheels. Tighten the lug nuts to 65-79 ft. lbs. (88-108 Nm).

Jan 28, 2010 | 2004 Kia Sedona

1 Answer

Torque spec for king nut on front spindle of 1999 2 wheel drive dodge dakota?


Unsure as to what you are calling the King nut but here are the torque specs for your front end.

Steering Gear-To-Cradle Bolt...........135 ft pnds
Steering Gear-To-Crossmember Bolt (Dakota 2 WD)..........190 ft pnds
Suspension Cradle Plate To-Cradle Attaching Bolt..............123 ft pnds
Tie Rod End-To-Steering Knuckle Nut Dakota (2WD) .............65 ft pnds
Tie Rod Lock Nut.....................55 ft pnds

Dec 08, 2009 | 1999 Dodge Dakota

1 Answer

Torque specs. for outer tie rod ends for 2006 dodge ram 1500 quad cab 4x4, 5.7 hemi


Tie rod end is 35 ft. lbs. Pinch bolt for the lower ball joint - 105 .I hope this helps you

Oct 06, 2009 | 2006 Dodge Ram

1 Answer

Need torque spec for 2000 Cirrus outer tie rod ends


45 Ft-lbs Tie-rod balljoint stud-to-steering knuckle nut, and 55 Ft-lbs Tie-rod (outer)- to- inner jam lock nut

Apr 04, 2009 | 2000 Chrysler Cirrus

Not finding what you are looking for?
2003 Kia Sedona Logo

Related Topics:

278 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...