Question about GMC Sierra
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I have the same problem and have trouble codes 35 and 36. I found out that there is a computer module that needs replaced as it sits low in a valley and gets hot and seperates. I am reseaching about the a/m fix that installs the new module away from heat.
Posted on Mar 12, 2009
First of all...does your truck have the retained accessory power (RAP)? If it does, the radio would always stay on with the key off until you open the drivers door. If it does have RAP and the door pin on the drivers door has went bad, then the truck doesn't know that you opened the door and continues to allow accessory power (although it would still cut off after about 20 minutes). If the interior lights come on when you open the door, then the pin is ok. If the lights come on, it could be the RAP relay. If it has gone bad, it is possible it is stuck supplying power and needs replacing. The relay should be labeled in the fuse panel, and there should be other relays in the panel with the same part number. You can swap a relay for the RAP relay and see if it fixes the problem...if it does fix it swap the relays back and replace the RAP relay. If the truck doesn't have RAP then it is possible the problem is in the radio..if you have a friend with a GM car or truck close to the same year you could swap radios and see if that fixes your problem...should be pretty simple. pull the cover off the dash, it just clips on, take out a couple screws that hold in the radio, unplug it and plug in the other radio. sorry so long winded...hope this helps you somewhat.
Posted on Mar 13, 2009
take off the cover on the top and bottom of the steering column just behind the wheel. pop the tilt lever out simply just by grabbing it and give it a good tug. then once you have the new switch and you get in there your going to need an inverted torx socket to remove the small bolts that hold the switch to the column. do not move the gear on the new switch make sure it lines up exactly as the old one did!!!!!!!!!!!!
Posted on Mar 15, 2009
Unless they moved it and are still using the same part,I would say that this one is located behind the glove box sandwitched between the underside of the dash and the top of the airbox.The blower motor is mounted to the underside of the airbox.
Posted on Jan 04, 2010
Tips for a great answer:
Mar 26, 2016 | 2008 Chevrolet Chevrolet SILVERADO 3500...
Aug 31, 2014 | Cars & Trucks
Mar 26, 2011 | 1994 GMC Sierra
Nov 13, 2010 | 2007 GMC Sierra 3500HD
Aug 13, 2010 | 1998 GMC Sierra
Dec 29, 2009 | 1998 GMC Sierra
Oct 29, 2009 | 1998 GMC Sierra
Jul 07, 2009 | 2002 GMC Sierra 1500
51 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: