Question about 1995 Chevrolet Tahoe

2 Answers

Will not shift into $wd

95 chevy tahoe, has the floor shofter, during the winter i was shifting out of 4wd and heard a pop, now when i try to shift into 4 anything it doesn not engage, the lever moves forward and backward, but the wheels don't engage, is there any way to figure out what is wrong with it woithout paying an arm and a leg?

Posted by on

  • Harleyrgm Jan 15, 2009

    Mine was in 4x4.Shut engine off.An hour later started it.Lever silll pulled,but not in 4x4

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

THERE IS A SOLINOID ON THE FRONT AXLE THAT MIGHT HAVE GONE OUT IT UNPLUGS AND THEN YOU CAN UNSCREW IT THEY ARE PRICEY.

Posted on Dec 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

ARE YOU TRYING TO GET TO 4TH WITH THE CAR RUNIGN AND IN NEUTRAL? IF NOT THEN TRY

Posted on Jun 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

4X4 Indicator lights not working at all no flashing or anything. Checked fuses and they are good unless there is another I don't know about. Also will not go into 4WD Hi or Low stays in 2WD.


Step by Step Troubleshooting 4wd 4x4 88-98 Chevy GMC ...

? 21:32
https://www.youtube.com/watch?v=Su9Dkrfd_Zg
Jan 20, 2014 - Uploaded by rwdelling
Step by Step Troubleshooting 4wd 4x4 88-98 Chevy GMC Truck ... flashing indicator lights and then would not shift from 2-4wd atall. .... 1997 2dr Tahoe in Nov and I've been having the same problems all winter. I was getting worried thinking I would have to pay a lot of money to get my 4WD working again.

Jan 03, 2016 | 1997 GMC Yukon

1 Answer

My 2003 Chevy Tahoe has traction control. I noticed this winter when i was on some ice that the traction control light stated that traction control was activated but i could hear grinding and it did not...


It is not supposed to. The traction control gives power to opposing wheels and applies brakes in milliseconds to prevent total loss of control of the car. The computer immediately takes over and prevents 4wd that could send the car into a worse skid.. You are talking about ice which is very different from snow where traction is concerned. The grinding you hear could have been the anti-lock system being activated.

Feb 25, 2015 | 2003 Chevrolet Chevrolet Tahoe

1 Answer

I have a few99 gmt jimmy with the automatic 4x4 buttons. I can't get it out of 4x4. Please help


Well from experience 99%. Of the time its not the actuator if it shifts into 4 lo and back to 4 hi. The book really sucks at this diagnosis. And if lights on buttons blink for 2 hi for a bit then stay in 4wd then u have to listen very carefully. When shifting from 4 hi. To 4 low the whine or growling noise from motor is heard. If, when shifting from 4 hi to 2wd this motor noise is heard, then actoator or wiring is the issue. If the time while 2wd light is blinking, ie: its trying to shift, no noise from motor or actuator is heard, then shift module has a burnt output. Now. Before replacing any of the components, if you have a schematic of this system, you would be confused on how any of it elworks even if you are a seasoned professional. I wouldn\'t bother 2 much with it as long as you theory inspect Evey millimeter of all the wires from actuator connector (on transfercase) to where it goes through metal and enters occupant compartment. If all wires look good. Lights in all 3, or 4 if u were lucky in neutral which means error, of the lights work, and if requested position is depressed on switch and motor tries to turn or does and clynks are heard , then actuator position switch is stuck and actuator is needing replaced, as not a serviceable assesembly, and I haven\'t had the ability to tear one apart. But if all lights work and when the selected switch button , example 4 WD, 2 WD or 4 lo, and no motor noise like heard when other shift works, them module is to blame. Now, I am a master mechanic with most experience at a gm dealership, I have fought with this system multiple times, and once I employed this diagnosis it has never failed me again. And the stack of 4wd shift modules in my bottom toolbox dawyer. Most times if won\'t shit at all night be actuator but not likely, 95% of the time when this issue rolled through dealership, it took a module to fix it.

Jun 23, 2014 | Cars & Trucks

2 Answers

My tahoe shifts into 4wd hi or lo by itself


very common problem with chevy 4 wd switching in out of 4wd is the incriptor on the side of tranfer case goes bad.check for a tsb [tech service bullitin] you can google it will explain more detail

Aug 01, 2012 | Cars & Trucks

1 Answer

I have a 4wd drive 95 sonoma, it's a 4.3, 5-speed manual. Anyway the 4wd always worked great but this winter it stopped working, i don't think it's much because when i try an put it in it shifts fine (the...


this is run on vacuum on the top of the tranfer case there is vacuum lines and a transfer vacuum switch pull the vacuum line off and see if there is oil in one of the lines there will be 3 lines on it, if there is you need to change that switch, i had this problem on my 95 sonoma and it fixed the problem, also does your heater go from defrost to the floor some times. it could also just be a small hole in a vacuum hose. there is alot of them under your truck

Feb 07, 2011 | 1995 GMC Sonoma

1 Answer

My 95 chevy tahoe has new tranny shifts fine when its cold but once it heats up the speed ometer and tac dont work it shifts like ****


Sounds like you have an electrical problem. Your truck should have a 4l60E in it, which is controlled by the PCM. If the speed signal is missing it will shift poorly and at the wrong times. Check the connection and wires at the vehicle speed sensor on the drivers side of the tailshaft housing. If this is something that started occurring after the the transmission was replaced look for pinched wires or other damage to the wires that may have been done during the installation. I've seen some sloppy transmission shops damage things or leave stuff loose so just go over everything.

Feb 11, 2010 | 1995 Chevrolet Tahoe

3 Answers

4WD LO will not disengage what can cause this.


@ 2000 gmc: Exactly right.

asker: Also, it helps if you're rolling at about 2 mph with the steering wheels straight.
You cannot shift into 4LO with the wheels turned or when in a drive
gear. Also, it may be that you need the electric shift unit serviced.
It is not recommended to drive on dry pavement while in 4LO.

Jan 07, 2010 | 1997 Chevrolet Tahoe

2 Answers

4x4 went out


My 95 Tahoe 4WD went out. I was the front axle engaging piston located on the front differential. The front driveshaft has power but shifting into 4WD causes the front differential to engage the two front wheels. You can remove it but leave it wired and see if it moves. I'm suspecting yours may be similar. If that's the problem less than $100 to replace yourself.

Sep 09, 2009 | 1994 Chevrolet K1500

1 Answer

Pop & clutch stuck to floorboard


probly the clutch fork or through bearing

Apr 05, 2009 | 1995 Isuzu Rodeo

1 Answer

1995 tahoe desiel stalls when driving


I used to live on a farm where we had a number of Chevy diesel's in the 90-98 year range. The 6.2 and 6.5L diesel's in those trucks were known to have problems. A very common problem was with the fuel injection pump going bad, causing the engine to intermittently stall for apparently no reason during driving.

Feb 12, 2009 | 1995 Chevrolet Tahoe

Not finding what you are looking for?
1995 Chevrolet Tahoe Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...