Question about 2000 Ford Windstar

1 Answer

Injecters are plugged how do i clean - 2000 Ford Windstar

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

You could do the proper thing and take them out and clean them; or do what I suggested to another problem person.
Run a tank of hi grade petrol and add 2 cans of a decent name brand injector cleaner and go for a ride into the country.
In 91.8888888% of all cases,it does work.

THAT is the cheap method, the more costly will be of course to book for an injector service.

Posted on Oct 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to unblock fuel injection of daewoo lanos1.6 16v


Fuel Injection Cleaning eBay

There are injector cleaning systems, and fuel injection cleaning solutions. Try the solution first in the gas tank. It may take a few doses and some time running the solution through the injection system.

May 17, 2014 | Cars & Trucks

1 Answer

My lancer is ilding rough


try a tune up depending on how many miles are on the car. just put set of plat plugs in it and get a fuel injection cleaning from mister lube or other lube shop. and dont mean just a bottle of cleaner you add to the gas. ask a shop if the have a injection meachine.should do it every 45.000 miles. cheap injectors and fuel rails clean

Apr 25, 2010 | 2002 Mitsubishi Lancer

2 Answers

How to change an exhaust manifold leak 7.5L


Right-Hand
Removal
  1. Remove spark plug heat shield (12A406).
  1. Remove distributor to spark plug wires (12286) using Spark Plug Wire Remover T74P-6666-A.
    1. Disconnect muffler inlet pipe.
    1. If equipped with secondary air injection, disconnect the secondary air injection check valve tube (9B480).
    1. Remove attaching bolts and right exhaust manifold (9430).
    1. Inspect joint faces for signs fo exhaust leaks, cracks or any defect that would make exhaust manifold unfit for use







Left-Hand Removal






1. Remove oil level indicator tube (6754).
  1. Remove spark plug heat shield.
  1. Remove distributor to spark plug wires using Spark Plug Wire Remover T74P-6666-A.
  1. Disconnect EGR valve to exhaust manifold tube (9D477). If equipped with air injection, disconnect the secondary air injection check valve tube.
  1. Disconnect muffler inlet pipe.
  1. Remove attaching bolts and exhaust manifold (9431).
  1. Inspect joint faces for signs of exhaust leaks, cracks or any defect that would make the exhaust manifold unfit for use.
Installation
  1. Clean mating surfaces of right exhaust manifold or left exhaust manifold and cylinder head (6049). Clean mounting flange of right exhaust manifold or left exhaust manifold and inlet pipe(s). Clean mounting surface for air injection tube or right exhaust manifold. Apply light film of Premium Long-Life Grease XG-1-C or -K or equivalent meeting Ford specification ESA-M1C75-B to right exhaust manifold or left exhaust manifold.
  1. Position right exhaust manifold or left exhaust manifold on cylinder head. Install attaching bolts and washers, starting at fourth bolt hole from front of each right exhaust manifold or left exhaust manifold. Tighten bolts to 34-47 Nm (25-35 lb-ft), working from center right to both ends.
    1. Position inlet pipes to right exhaust manifold or left exhaust manifold. Install attaching nuts and tighten to 34-47 Nm (25-35 lb-ft).
    1. Position the secondary air injection check valve tube and the secondary air injection tube gasket (9C435) at rear of right-hand exhaust manifold. Install attaching bolts and tighten to 19-25 Nm (14-18 lb-ft).
    1. Attach the secondary air injection manifold tube (9B449) to left-hand exhaust manifold fitting (located under EGR tube). Tighten nut to 30-40 Nm (22-30 lb-ft).
    1. Attach the secondary air injection check valve tube to rear of right-hand cylinder head. Tighten bolts to 75-85 Nm (56-62 lb-ft).
      1. Connect EGR valve to exhaust manifold tube to left exhaust manifold, if removed. Tighten nut to 53-72 Nm (39-53 lb-ft).
      1. Install spark plug heat shield and distributor to spark plug wires.
      1. Install oil level indicator tube to left exhaust manifold, if removed. Tighten nut to 13-24 Nm (10-18 lb-ft).
      2. Start engine (6007) and check for exhaust leaks.







b913da4.gif
28b39c6.gif
Hope this helps you...WF †

Mar 10, 2010 | 1996 Ford F250 Crew Cab

1 Answer

Missfiring on one cylinder


do you know the firing order? if not check it and re configure the plug wires to that order

Jan 31, 2010 | 1999 Daewoo Lanos

3 Answers

Random missfire


check your plug wires,and coil pack,it sounds like your having a misfire under load,what motor is in truck?

Mar 30, 2009 | 1996 Dodge Dakota

1 Answer

Code p303


very common problem two things either the injector on that cylinder is bad or the fuel rail need clean out with injection clean a good shop can clean them.

Jan 25, 2009 | 2003 Chevrolet Malibu

1 Answer

No power


Hi There,

If your car was running good and suddently it became like this and getting then I think your car either having a carburator or fuel injection problem. If it is a carburator I sugess go to shop for carburator cleaning and check for leakage, if it is a fuel injection then replaced fuel filter and one of the fuel injection cleaning stuff in gas tank for cleaning those fuel injection......

KK

Sep 14, 2008 | 1996 Suzuki Sidekick

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5522 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...