Question about 1991 Chevrolet Camaro

Open Question

Where is the map sensor located on a 1991 chevy camaro rs?

Posted by on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 373 Answers

SOURCE: 1998 chevy suburban map sensor

Hi, The Map sensor on a Suburban is located.
Beside of the ignition coil. on the intake.
Is a litle sensor with a connector of 3 wires.

I hope this work for you. OK

Posted on Jul 03, 2008

  • 21 Answers

SOURCE: starter relay position for 1991 RS Camaro

It is located on the left hand kick panel fairly high

Posted on May 03, 2009

  • 426 Answers

SOURCE: 1991 Chevy Camaro RS engine cut off while driving on the freeway.

well, need to check fuel pressure, spark. Ignition module in distributors go out that is common

Posted on Jun 21, 2009

  • 701 Answers

SOURCE: need the location of the mapping sensor for a 1994 chevy caprice

Hello l_anderson36: My name is Roger and I will help you. You should find the map sensor at the front of the engine. Located on the drivers side of the engine. The sensor will have a plug with three wires on it.
Should you need further help please just ask. Please rate the quality of this answer. This way we know your answer helped. Thank You for using Fix Ya.Roger

Posted on Aug 07, 2009

  • 10 Answers

SOURCE: my 1992 chevy camaro rs fan doesn't work

Hook fan up to Batt power. if it work check fuses and relay. if no problem its a wiring problem. If fan is inop replace it

Posted on Sep 21, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is cooling fan sensor located on 1991 camaro rs 305 engine

My info says upper engine, center, close to water outlet, for the coolant temp sensor.
If your not sure look up wiring diagram for that sensor, note the wire colors. has free wiring diagrams as well as

Mar 16, 2015 | 1991 Chevrolet Camaro

2 Answers

I need vacuum line schematic for a 1991 chevy camaro rs v8?

Dec 10, 2014 | 1991 Chevrolet Camaro

1 Answer

Lower idle 305 tbi 1991 camaro

I own a 1991 rs it had a ideal problem so I changed the following only to learn this...! I changed the o2 the map the air temp sensors and new bosh plugs wires dist. And button init. Mod and pick up coil all helped some but it still weren't right then I learn about the erg vaulve oh I changed vac lines as well I now know the egr controls gas flow and can go bad or stick their bout ninety bucks

Sep 21, 2012 | 1991 Chevrolet Camaro

1 Answer

How do u bypass the security on my 1991 chevy camaro rs?

Go to this link. Should help you out.

May 09, 2012 | 1991 Chevrolet Camaro

1 Answer

I replaced the fuel pump, the EGR, MAP,IAC,sensors and now the engine revs too high at start around 3200 rpm, the revs go down when put in drive to 1500rpm 1991 Chevy Camaro V6 3.1 Everyone here said to...

My experience has been with later model vehicles, but a bad throttle position sensor most definetly causes this type of situation. Two torx screws, opposite side if the throttle body, should have a three wire plug.

Aug 17, 2011 | 1991 Chevrolet Camaro

1 Answer

Were is the oil pump located on 1991 chevy camaro rs

It is located on the bottom of the engine, inside the oil pan.

Sep 22, 2010 | 1991 Chevrolet Camaro

2 Answers

I have a 1996 chevy camaro rs, pulled code from computer, pulled up 1080 intake manifold faulty. what is this code reading? and what part is it saying is faulty? i don't have the manual.

I only see a code P0108- Manifold Absolute Pressure (MAP Sensor Circuit High Pressure) this is for both the V-6 and the 5.7 L V-8. this sensor measures the change in pressure in the intake, then converts the info into voltage output, what this means is that the vacuum is low, look for a lose or disconnected vacuum line, if none can be found replace your MAP sensor, I hope this solve your problem.

Sep 28, 2009 | 1996 Chevrolet Camaro

1 Answer

Starter relay position for 1991 RS Camaro

It is located on the left hand kick panel fairly high

May 03, 2009 | 1991 Chevrolet Camaro

Not finding what you are looking for?
1991 Chevrolet Camaro Logo

Related Topics:

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides