Question about 1997 Cadillac DeVille

1 Answer

Steering column i need a diagram of a steering wheel wiring i mean the way it looks on the inside of the steering column

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 625 Answers

That's kind of hard for me to get you one because i don't know how to add images over here but will tell you how to get one either go to autozone.com and you will find a lot of repair information or call the delaer and have them fax you the information but you betetr go to the first choise since dealers help whenever they want to do it

Posted on Jun 01, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2007ford500hornswitch problem


Damage connection of wires inside steering wheel or column

May 02, 2016 | Cars & Trucks

2 Answers

1989 chevy truck remove and replace steering column


you need first disconnect negative battery cable. you need steering wheel puller you have to remove steering.look under hood disconnect flange end of the steering shaft at the flexible coupling separate the coupling from the lower end of the steering column. you have to go inside vechicle remove lower steering column cover yoo have to remove steering column dash to panel screws then you have to remove shift linkages and remove disconnect electrical wiring connector to turn signal and ignition switch.your model truck shouldnt have the floor board mounting screw hold column to the floor.

Jun 18, 2013 | Cars & Trucks

1 Answer

How to remplase the turn signal swith


it is inside the steering column you need to remove the steering wheel (need steering wheel puller. remove lock plate (need lock plate removal tool) under the lock plate is the switch it kind of looks like a horse shoe with many wires going to it.

Sep 23, 2012 | 1993 Buick Regal

1 Answer

Buick lesabre 1993 horn wiring diagram


is your horn relay good, swap another relay and see if that works, if not you should check wiring at lower steering column, you could splice wire from relay to wiring harnees at lower steering column inside vehicle

Sep 03, 2012 | Cars & Trucks

1 Answer

I need the whole steering column diagram! I mean the wireing inside all the way down to the floor board.


you can download diagrams from different sources, try autozone , chilton or mitchell, most diagrams do not come like picture with details, wiring diagrams look like grids with abbreviations
so be prepared

Aug 24, 2010 | Chevrolet Blazer Cars & Trucks

1 Answer

Steering column horn wiring diagram need. horn sounds when the steering wheel is turned. 1982 was as far back as the years went on the selection, I do need 1972.


have to pull strng wheel off you have a horn wire grounding out when you turn wheel only 2 wires biggest issue pulling steering wheel

Aug 15, 2010 | 1982 Ford F 250

3 Answers

Steering wheel is loose


If you mean it is about to fall off in your hands, it needs to be tightened firmly to the steering column. If you mean the wheel has a lot of play left and right, you have worn steering components and should visit a garage asap. Things like the tie rod ends are worn, ball joints etc are just a few of the critical parts that need attention in any vehicle.

Oct 06, 2009 | 1996 Ford F250 Crew Cab

1 Answer

Steering column is becoming loose on 1997 Buick Lesabre. I would like detailed instructions on removing the air bag module and steering wheel enouhg to get to where it needs to be tightened.


Yes there are four bolts halfway down col. this removal procedure may help.REMOVE OR DISCONNECT
  1. Disable SIR System.
  2. Two screws at back of steering wheel.
  3. Position inflator module to gain access to wire connectors. Note wire routing for assembly reference.
  4. Push in and rotate horn contact lead counterclockwise, and remove from the steering column horn tower.
  5. Horn contact lead.
  6. Retainer (CPA) from SIR wiring connector.
  7. SIR wiring connector from inflater module.
  8. On models so equipped, disconnect steering wheel control switch connector.
  9. Inflater module. WARNING: When carrying a live inflator module, make sure bag and trim cover are pointed away from body. Never carry the Inflator module by wires or connector on underside of module. In case of an accidental deployment, bag will then deploy with minimal chance of injury. When placing a live inflator module on a bench or other surface, always face the bag and trim cover away from surface. Never rest a steering column on the steering wheel with inflator module face down and column vertical. This is necessary so that a free space is provided to allow air bag to expand in the unlikely event of accidental deployment. Otherwise personal injury may result.
INSTALL OR CONNECT
  1. Steering wheel control switch connector it equipped.
  2. Retainer (CPA) to SIR wiring connector.
  3. Route horn contact lead to steering column tower; push lead into horn tower and rotate clockwise to locked position.
  4. Horn ground lead.
  5. SIR connector and retainer (CPA).
  6. Inflator module to steering wheel. Install top surface of module first to ease assembly and fit. Do not pinch any wires.
  7. Two screws through back of steering wheel to inflator module.
    • Tighten screws to 3 Nm (27 inch lbs.).
  1. Enable SIR system

May 27, 2009 | 1988 Buick LeSabre

3 Answers

Brake lights not working


I had the same problem, the brake light circuit runs through the column and through the turn signal switch and the contacts are most likely corroded. You will have to take the steering wheel off but be sure to disconnect the battery and let the car sit for 5min before taking the air bag out. Once you get the steering wheel off
you will take the screws out of the signal switch assembly, once done you will see two torks screws holding the switch cover on inside are the contacts. Clean the contacts with emory clothe and contact cleaner. The Cutlass series are notorious for this problem, you will need a friend to put the steering wheel locking plate back on because of the heavy spring load. I hope this fixes anybody with the same problem.

Sep 25, 2008 | 1994 Oldsmobile Cutlass Supreme

1 Answer

Key tumbler


yes remove steering wheel look in ignition area inside column pull only wire strait out there will be a torx screw remove that and ignition will slide out

Aug 11, 2008 | 1992 Pontiac Grand Prix

Not finding what you are looking for?
1997 Cadillac DeVille Logo

195 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...