Question about 1996 Plymouth Breeze

1 Answer

All i have is my tail lights in the, i change the brake switch, and lihgt blubs.Still i have no brake lights.I also checked the fuses

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 8,125 Answers

Did you check the fuses under the hood? There should be a 20 amp brake light fuse in there.
All i have is my tail lights in the, i change the - 1126dae.gif90ee1cd.gif

Posted on Oct 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I start car taillights come on but no brake lights or third light in window


Well your parking lights should not come on when you start the car unless you have turned on light switch. Most cars you must step on the brake to start, so the brake lights would be on. Your problem maybe a burnt out bulb on rear window lite.

TEST: have someone watch the rest and push on brakes see what lights. If 2 tail lite then its blub.
If non light its the fuse in box underdash.
Now take foot off brake and turn on lights and emergency flashers walk around check all lights then step on brake and see if brakes light up.

Replace bulbs or fuses as needed.

Hope this helps Mike

Apr 30, 2017 | Cars & Trucks

1 Answer

I have a 01 GMC Sonoma. One night noticed i had no tail lights. But my brake lights work. I have blinkers and hazards. I have checked all the fuses and the blubs. I also have power back to the sockets.


Well, if you have power on the tail light circuit you should have lights. The tail light circuit is different from brake and turn signal, and they both use the same ground.
Are you sure you have power on the tail light circuit to the bulbs ? And are the parking lights out for the front too ?

Jul 01, 2013 | Cars & Trucks

2 Answers

I have 89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem


The turn signals and brake lights use the same circuit and filament in the bulbs. The tail lights are on the other circuit which comes from the headlight switch.
Do you have power on the tail light fuse ?

Feb 25, 2013 | 1987 Ford Bronco II

1 Answer

No brake lights, blubs and fuses ok. center brake light DOES work


Usually when the third brake light works but the regular lights don't the problem is in the turn signal switch.
I would check for voltage there.

Jul 19, 2012 | 2004 Jeep Grand Cherokee

1 Answer

No tail lights


You should have a fuse panel under you dash inside. This is where the fuses are located for lights. Don't know the exact location, but you can pull each fuse to see if it is bad. This won't hurt anything. It just keeps you from hunting down a diagram of where the fuse is located.

Apr 20, 2010 | 2008 Scion Xb

1 Answer

No rear tail lights replaced fuses and blubs all front tail lights directionals and brake lights work


Check that the bulb is making good contact.If so, you have a wire bab some where.

Dec 05, 2009 | 2000 Dodge Durango

1 Answer

Brake lihgts dont work i have haz turns running


check brake light switch, under dash on steering column where brake pedal meet

Oct 31, 2009 | GMC Sierra 2500 Cars & Trucks

1 Answer

Tail lights only work with brakes and turn signals fuses fine, blubs new ???


Your headlight switch may be going bad. Work it while someone watches the tail lights. Anything different lights replace the switch.

Oct 15, 2009 | 1988 Ford Crown Victoria

2 Answers

1998 Chevrolet Monte Carlo brake lights do not


check blubs if the center light works should be working side brake lights

Sep 07, 2009 | 1998 Chevrolet Monte Carlo

Not finding what you are looking for?
1996 Plymouth Breeze Logo

Related Topics:

109 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...