Question about 2005 Toyota Corolla

1 Answer

Key will not turn 2005 toyota corolla - 2005 Toyota Corolla

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,565 Answers

Try holding the steering wheel hard over to the left, then turn the key. still not working? turn hard over to the right, turn the key. still not working? spray WD40 or whatever lube you have laying around in the ignition, just a wee bit. work the key in and out of the ignition. Still no work? Try one of your back up keys.

Posted on Oct 13, 2010

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 337 Answers

SOURCE: 2005 corolla fuse box

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801a8fd0

Posted on Nov 30, 2008

  • 176 Answers

SOURCE: 2005 toyota corolla ce maint. required need to know how to reset.

To reset the system. Turn the ignition key to the "OFF" position with the odometer reading shown. Turn the ignition key to the "ON" position while holding down the trip meter reset knob. Hold down the knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.

Posted on Jun 12, 2009

jimboz4
  • 305 Answers

SOURCE: 2005 Toyota Corolla Radio fuse

Pg. 250 of your 2005 Owner's Manual shows the location of the Fuse Boxes. There is one under your hood on the driver's side and the other is under the dash just to the left of steering wheel. Pg 272, will show you how to replace the fuses. Pg. 286-287 gives a diagram and description of each fuse and what part of the electrical system it enables.
This portion of the electrical system correspondeds to the fuse in position 32 on pg. 287 of the manual.
Your going to have to get on your back with a flashlight and open up the fuse box under the dash by the steering wheel. The lid of the fuse box shows the positions of the fuse and their amperage rating. Like I said, replace the fuse in postion 32 (15 Amp). There is a spare 15 Amp fuse in the fuse box under the hood (easy to get to, see the diagrams in the owner's manual). There is also a fuse puller tool next to the spare fuses.

Posted on Aug 11, 2009

  • 333 Answers

SOURCE: 2005 toyota corolla motor oil capacity?

if you have a 1ZZ engine

4.2 quarts, 4.4 quarts with oil filter change

if you have the 2ZZ engine (XRS model) it is

4.4 quarts, 4.6 quarts with oil filter change

NOTE these are updated capacities that reflect changes identified in TSB: TSB-0134-08 issued July 15, 2008.
Your owners manual will reflect a lesser quantity that Toyota has since revised.


Posted on Sep 10, 2009

  • 333 Answers

SOURCE: How do I remove brake drum on 2005 toyota corolla

Under normal circumstances, the drum should slide right off once the wheel is removed.

If you have built up rust holding it on, there are two threaded holes near the center of the drum to aid in removal.
Insert two 12mm bolts into the holes and, while adding plenty of lubricant, turn the bolts in even amounts until they push the drum off.
Be sure to keep them lubed, as they will strip out easily if not.

If you have aftermarket drums without the holes or the screwholes are stripped out, smacking the face of the drum with a dead blow hammer will help free it up, but takes much longer for success.

Posted on Oct 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i turn off a mantenance light of a 2005 corolla


Hi,
Turn on key,( do not start), Look at instrument cluster and find the digital numbers. Trip A Trip B and the miles you have on car. Press the black button until you can see the odometer. ( miles on car). Turn off key. With key off press the black button. Turn key on. (do not start). You will see some lines starting to erase themselves , when all the lines are gone, you have reset the maintenance schedule.
In about 4500 miles the light will come on again to remind you to change your oil.
Enjoy,
Wayne

Oct 12, 2011 | 2005 Toyota Corolla

1 Answer

2005 corolla hit in front


No, Toyota Corollas don't have an inertia switch, that is mostly a Ford thing. Check to see if you hear the fuel pump run when you turn the key on. Check the fuel pump relays, fuses (EFI relays and fuses) or might be the fuel pump itself. If it does run, there might be some wires that were disconnected or displaced upon impact.

Sep 09, 2009 | 2005 Toyota Corolla

2 Answers

I have a 2005 Toyota Corolla that won't start


Do the ignition lights come on when the key is turned ?
If so I would be looking at the starter motor .....There should be 2 wires going to it , A big heavy one and a little one.
Make sure the little wire hasn't fallen off the terminal on the starter..It's this wire that powers the solenoid and in turn the solenoid powers the starter.
Let me know how you get on .

Jun 27, 2009 | 2005 Toyota Corolla

1 Answer

My Toyota Corolla S 2005 keeps beeping


Loose wire in ignition key slot, why does the car normally beep, keys left in car, lights on after turning off, etc....check those things first before going to dealership or repair shop.

Jun 18, 2009 | 2006 Toyota Corolla

4 Answers

2005 toyota corolla ce maint. required need to know how to reset.


To reset the system. Turn the ignition key to the "OFF" position with the odometer reading shown. Turn the ignition key to the "ON" position while holding down the trip meter reset knob. Hold down the knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.

Jun 12, 2009 | 2005 Toyota Corolla

2 Answers

Reset my maint reqd light


watch this free video instructions on how to reset your maint reqd light if video dosent work go to www.vehix411.com

May 06, 2009 | 2005 Toyota Corolla

Not finding what you are looking for?
2005 Toyota Corolla Logo

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...