Question about Dodge Ram 1500

1 Answer

HOW DO I INSTALL IGNITION STARTER SWITCH FOR 1995 DODGE RAM PICKUP??

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,509 Answers

The covers come off the steering collum and the switch is heald to the collum with two #4torx headed bolts ( torx socket not a key ) unplug the electrical connector and plug in the new one It'll come with new bolts. sometimes they have #3 torx and you'll just have to cut the heads off and install the new bolts after the switch is out of the way. put the lock cyclinder back in. The lock cyclinder comes out of the old one as the cover is lifted up theres a pin to push down with the key in the run position, and the tumber will pull out and the cover can be removed as you put it back to gether the cullum can be all the way to gether and put the lock and key in last, then turn it to start then off and your done.

Posted on Oct 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I use a 1995 dodge ram 1500 starter in a 2002 dodge ram 1500


I guess the short answer is no.
It depends on the engine and trans, but the starter for a 1995 model 5.2 is different from a 2002 model with a 4.7 engine.

Sep 16, 2015 | 1995 Dodge Ram

1 Answer

Key is stuck in ignition receiving no electricity


You are not the only one:

Key stuck in ignition, wont start, dodge ram pickup - Fixya

www.fixya.com/.../t14560159-key_stuck_in_ignition_wont_start_dodge
Oct 6, 2012 - key stuck in ignition, wont start, dodge ram pickup - Dodge Ram 1500question. ... 631 Answers. SOURCE: 1999 Dodge Ram 1500 Pickup error code p0171. This code means ... Jun 28, 2011 ' 1987 Dodge Ram 50 · 1 Answer .

Aug 23, 2015 | 2011 Dodge Ram Pickup 1500

1 Answer

My 2005 dodge ram 1500 has no fire to ignition switch. Truck will not start or crank over.


Begin troubleshooting by checking 25A FUSE 20 in the integrated power module. Also check 30A FUSE 14. If the fuses are OK, there should be 12V at terminal 4 (RED wire) of the ignition switch. Check for 12 volts at terminal 13 (YEL wire) with the ignition switch rotated to START position. If nothing happens, the starter motor relay, the starter, and/or the PCM could be defective.

Dec 15, 2014 | 2005 Dodge Ram 1500

1 Answer

My truck won't start i replaced ignition the tumbler the neutral safety switch. It will crank right up if i jump at starter but not with the key


  1. This is the starter sequence on some dodge trucks
  2. turn the key to start
  3. start signal goes to computer
  4. computer closes a starter relay in the relay box ( underhood )
  5. starter relay in box triggers the starter soleniod on the starter.
  6. PS could there be an aftermarket alarm system on the truck?
  7. some alarms only interupt the starter signal

Jul 24, 2010 | 1995 Dodge Ram

1 Answer

I have a 1996 Dodge Ram pickup. It just shuts


the ignition module,witch is in the computer.

Apr 30, 2010 | 1996 Dodge Ram

1 Answer

When turning the ignition on it the starter stopped suddenly and a puff of smoke came from under dash-1995 ram 1500 5.2. checked the starter, its good, replaced under the hood relay switch and underdash...


Go to your local auto parts store and purchase a repair manual with the wiring schematic in it. It will show you the exact wire you are looking for. When replacing it purchase the same guage & color wire so there will not be any problems or confusion if later repairs are needed.

Apr 28, 2010 | 1995 Dodge Ram

1 Answer

Starter stays engaged


DID THIS PROBLEM HAPPEN BEFORE YOU REPLACED THE SWITCH? IF IT DID, THAN SOUNDS LIKE YOU HAVE A BAD STARTER SHORTING INTERNALLY
LET ME KNOW HOW YOU MAKE OUT AND GOOD LUCK.

Mar 24, 2009 | 1995 Dodge Ram 3500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8265 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...