Question about 1993 Buick Park Avenue

1 Answer

Instaling new fuel filter - 1993 Buick Park Avenue

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 347 Answers

Mounts under the body just in front of the drivers side rear tire

Posted on Oct 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How would I replace my fuel Filter


The fuel filter is an integral component of the fuel pressure regulator, which is mounted on top of the fuel pump module, located in the fuel tank. When the fuel filter/regulator assembly requires service, the fuel tank must be removed from the vehicle, however, the fuel pump module does not need to be removed.
  1. Disconnect the battery ground cable.
  2. You dont have to relieve your fuel systems pressure because your jeep has an automatic bleeder.
  3. Remove the fuel tank assembly.
  4. Clean the area around the fuel filter/regulator.



0900c152800a96ce.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 5: Remove the fuel filter/pressure regulator retaining clip from the top of the assembly


0900c152800a96cf.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 6: Replace the old fuel filter/pressure regulator mounting gasket

  1. Disengage the retaining clamp from the top of the filter/regulator assembly. Discard the retaining clamp.
  2. Using 2 small prying tools, pry the filter/regulator assembly out from the top of the fuel pump module. The filter/regulator assembly will unsnap from the fuel pump module.
  3. Remove and discard the mounting gasket below the filter/regulator.
  4. Before discarding the fuel filter/pressure regulator assembly, inspect the assembly to verify that the O-rings are intact. If the smallest of the 2 O-rings cannot be found on the bottom of the filter/regulator, it may be necessary to remove it from the fuel inlet passage in the fuel pump module.

To install:


0900c152800a96d0.jpg enlarge_icon.gifenlarge_tooltip.gif

Fig. Fig. 7: Check the condition of the fuel filter/pressure regulator O-rings

  1. Clean the recessed area in the pump module where the filter/regulator assembly is to be installed.
  2. Check the replacement filter/regulator assembly to make sure that the new O-rings are already installed on the assembly.
  3. Apply a small amount of clean engine oil to the O-rings.
  4. Install a new gasket on top of the fuel pump module.
  5. Press the new fuel filter/pressure regulator assembly into the top of the fuel pump module until it snaps into position (a positive click must be heard or felt).
  6. The arrow on top of the fuel pump module should be pointed towards the front of the vehicle (12 O&rsquoclock position).
  7. Turn the filter/regulator assembly until the supply tube (fitting) is pointed to the 11 O&rsquoclock position.
  8. Install new retainer clamp (the clamp snaps over the top of the filter/regulator and locks to the flanges on the pump module).
  9. Install the fuel tank assembly.
  10. Connect the negative battery cable.

Jan 28, 2011 | 1996 Jeep Grand Cherokee

1 Answer

LOCATION OF FUEL FILTER 1999 BUICK PARK AVE


It's on the left hand frame rail, in front of the left rear tire.
107125379

  1. Relieve the fuel system pressure.
  2. Raise the vehicle.
CAUTION: Refer to Caution in Cautions and Notices.

  1. Remove the quick-connect fitting at the fuel feed pipe (3).
  2. Remove the threaded connection (2) at in-line fuel filter.
IMPORTANT: Inspect the O-ring on fuel filter outlet pipe for cracks or damage. Replace as required.

  1. Inspect the fuel lines, O-rings for cuts, swelling, cracks, and distortion. Replace the lines as required.
  2. Inspect the fuel return line (4).
  3. Inspect the fuel vent pipe (1).
  4. Drain any remaining fuel into an approved gasoline container.
  1. Remove the protective caps from the new in-line fuel filter.
  2. Install the new plastic connector retainers on the in-line fuel filter inlet and outlet.
Install the new plastic connector retainers in the same position as on the old in-line fuel filter.

  1. Install the quick-connect fitting (3) at the inlet of the in-line fuel filter.
IMPORTANT: Make sure that the O-ring is installed on the outlet pipe before installing the pipe

  1. Install the threaded connection (2) at the in-line fuel filter.
Tighten
Tighten the in-line fuel filter outlet nut to 30 N.m (22 lb ft) using a back-up wrench in order to prevent the nut from turning.

  1. Lower the vehicle.
  2. Tighten the fuel tank filler pipe cap.
  3. Install the negative battery cable.
7.1. Turn the ignition switch ON for 2 seconds . 7.2. Turn the ignition switch OFF for 10 seconds . 7.3. Turn the ignition switch ON 7.4. Check for fuel leaks.


Oct 20, 2010 | 1999 Buick Park Avenue

1 Answer

Is there A in line fuel filter on A 2001 grand am 3400 and if so where is it


Fuel Filter Removal & Installation To Remove:
NOTE: There is no maintenance schedule for fuel filter replacement. Replace the fuel filter if restricted. Inspect the fuel tank internally if you find a restricted fuel filter.
Typical inline fuel filter gm-05-38-686.gif

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Relieve the fuel system pressure.
  3. Raise and safely support the vehicle.
  4. Remove or disconnect the following:
    • Quick connect fitting at the fuel filter inlet
    • Fuel filter outlet fitting from the fuel filter while holding the filter fitting with a back-up wrench
    • Fuel filter from the vehicle
    • Fuel line O-ring.
To Install:
  1. Position the new fuel filter in the bracket.
  2. Install a new plastic retainer on the fuel inlet line.
  3. Lubricate the new fuel pipe O-ring with clean engine oil.
  4. Install the fuel pipe O-ring.
  5. Reconnect the fuel outlet line to the filter by holding the filter with a back-up wrench and tightening the line fitting to 20 ft lbs (27 Nm).
  6. Lower the vehicle.
  7. Pressurize the fuel system and check for leaks.
prev.gif next.gif

Jul 12, 2010 | 2001 Pontiac Grand Am SE

1 Answer

Cant find where the fuel fillter is located in our pontiac Grand am 2004


Fuel Filter (behind gas tank) Removal & Installation To Remove:
NOTE: There is no maintenance schedule for fuel filter replacement. Replace the fuel filter if restricted. Inspect the fuel tank internally if you find a restricted fuel filter.
Typical inline fuel filter gm-05-38-686.gif

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Relieve the fuel system pressure.
  3. Raise and safely support the vehicle.
  4. Remove or disconnect the following:
    • Quick connect fitting at the fuel filter inlet
    • Fuel filter outlet fitting from the fuel filter while holding the filter fitting with a back-up wrench
    • Fuel filter from the vehicle
    • Fuel line O-ring.
To Install:
  1. Position the new fuel filter in the bracket.
  2. Install a new plastic retainer on the fuel inlet line.
  3. Lubricate the new fuel pipe O-ring with clean engine oil.
  4. Install the fuel pipe O-ring.
  5. Reconnect the fuel outlet line to the filter by holding the filter with a back-up wrench and tightening the line fitting to 20 ft lbs (27 Nm).
  6. Lower the vehicle.
  7. Pressurize the fuel system and check for leaks.
prev.gif next.gif

Jun 30, 2010 | Cars & Trucks

1 Answer

How to change fuel filter mazada 2003 tribute


Mazda Tribute 2001-06
Fuel Filter - Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Properly relieve the fuel system pressure.
  3. Remove or disconnect the following:
    Negative battery cable Fuel line to the fuel filter
  4. Loosen the clamp and remove the filter
To install:
  1. Install or connect the following:
    New clips to the fuel lines Fuel filter and tighten the clamp Fuel lines to the fuel filter Negative battery cable
  2. Start the vehicle and check for leaks, repair if necessary.
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Properly relieve the fuel system pressure.
  3. Disconnect the negative battery cable.
    NOTE To deplete the backup power supply energy, disconnect the negative battery cable and wait at least one minute. Be sure to disconnect auxiliary batteries and power supplies, if equipped.
  4. Disconnect the fuel line at the fuel filter.
  5. Loosen the clamp and remove the filter.
To install:
  1. Install or connect the following:
    New clips to the fuel lines Fuel filter and tighten the clamp Fuel lines to the fuel filter Negative battery cable
  2. Start the engine and check for leaks, repair if necessary.

Hope this help; TY for using Fixya (remember comment and rated this).

Apr 01, 2010 | 2003 Mazda Tribute

3 Answers

Where Is The Fuel Filter Located On A 2003 Ford Explorer V8 And How Do You Change It?


  1. Disconnect the battery ground cable.
  2. Properly relieve the fuel system pressure.
  3. Raise the vehicle on a hoist.
  4. Remove the bolts and the fuel filter heat shield.
  5. Remove the nuts and the fuel filter shield.
  6. Disconnect the quick release and spring lock couplings and remove the fuel filter.

To install:
  1. Remove any fuel line caps.
  2. Install the new fuel filter, connecting the quick-release and spring-lock couplings.
  3. Install the fuel filter shield.
  4. Install the fuel filter heat shield. Torque the bolts to 15 ft. lbs. (20 Nm).
  5. Reconnect the battery ground cable.
  6. Lower the vehicle.
  7. Start the vehicle, check for leaks and repair if necessary.


e38232f.jpg

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 26, 2010 | 2003 Ford Explorer Sport

1 Answer

Replace fuel filter


  1. Relieve the fuel system pressure. For details regarding this procedure, please refer to Section 5 of this manual.
  2. If not done already, disconnect the negative battery cable.
  3. Raise and safely support the vehicle.
  4. Clean both fuel feed pipe connections and the surrounding areas at the in-line fuel filter with a clean rag to avoid possible contamination of the fuel system.
  5. Using a backup wrench, remove the fuel line fittings from the fuel filter.
  6. Either separate the quick-connect fittings or remove the fuel filter mounting screws, then slide the fuel filter out of the mounting bracket.
  7. Discard the fuel line O-rings and replace with new ones during installation.
To install:
  1. Install new O-rings to the fuel line fittings.
  2. Connect the fuel lines to the fuel filter.
  3. Position the filter in the mounting bracket, in the same position it was during removal. Using a backup wrench, tighten the fuel lines to 16 ft. lbs. (22 Nm).
  4. Install the fuel filter mounting screws.
  5. Carefully lower the vehicle. Install or tighten the fuel filler cap.
  6. Connect the negative battery cable.
  7. Start the engine and check for leaks.
25d7525.gif
Location of the fuel filter

9f0ac98.gif
Unfasten the retaining bracket can make removal of the fuel filter easier

2c6ca73.gif
Either use a clean rag or compressed air to clean the surrounding areas of the filter

523254f.gif
Use a backup wrench to disconnect the fuel line fittings from the filter

2e1fdd8.gif
Disengage the quick-connect fittings, then remove the filter from the vehicle

0d20d1f.gif
In-line fuel filter mounting and related components

It sits in front of the fuel tank.

Dec 07, 2009 | 1992 Buick Riviera

1 Answer

Where is that fuel filter


Removal & Installation Two types of filters are used, depending on the vehicle. Both are located between the rear axle and the fuel tank.
  1. Disconnect the negative battery cable.
  2. Unscrew the cover box.
f9bd269.gif
Fuel pump/filter assembly

07ce068.gif
Fuel pump package cover

  1. Remove the gas cap, fuel pump cover and pressure hoses.
  2. Loosen the screws and remove the filter. Remove the connecting plug from the old filter and install it on a new filter using a new gasket.
To install:
  1. Install a new filter in the direction of flow. Always replace the copper gaskets.
  2. Replace the attaching screws.
  3. Install the pressure hoses, pump cover and gas cap. Torque the banjo fittings to 80 inch lbs. (9 Nm).
  4. Install the fuel filter in the holder by positioning it in the center of the transparent holder. Be sure the plastic sleeve between the fuel filter and fuel pump is installed. Galvanic corrosion may occur in cases of direct contact between these components.
  5. Replace the cover box and check for proper sealing.

Oct 12, 2009 | 1992 Mercedes-Benz Mercedes Benz 400 Class

1 Answer

Who do I locate the fuel filter for my buick lesabre 99?


Fuel Filter Removal & Installation To Remove:
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Disconnect the negative battery cable.
  3. Relieve the fuel system pressure.
  4. Raise and support the vehicle.
  5. Disconnect the plastic quick connect from the fuel filter inlet.
  6. Unthread the fuel filter from the outlet pipe.
  7. Drain remaining fuel into a gasoline container
86a9bf2.jpg
To Install:
  1. Remove the new fuel filter protective caps.
  2. In the same position as on the old fuel filter, install the new plastic connector retainer on the fuel filter inlet.
  3. With clean engine oil lubricate the new fuel pipe O-ring and install it on the outlet pipe.
  4. Connect the fuel filter inlet to the quick connect fitting.
  5. Thread the fuel filter into the fuel outlet line, and using a back-up wrench prevent the nut from turning torque to 22 ft-lb (30 Nm).
  6. Lower the vehicle.
  7. Install or tighten the fuel cap.
  8. Connect the negative battery cable.
  9. Check for leaks using the following procedure:
    1. Turn ON the ignition for 2 seconds.
    2. Then OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
  10. Install the fuel injection sight shield.

Apr 02, 2009 | 1999 Buick LeSabre

1 Answer

Basic service


Here are detailed instructions on the location, removal, and re-installation of your fuel filter. Hope it helps and have a great day!

REMOVAL & INSTALLATION
Carbureted Engines
These vehicles use two replaceable fuel filters. A small one is in the fuel line under the hood; a larger one is located at the rear, just inboard of the left rear wheel.
Whenever the filter(s) are replaced, take great care to avoid the entry of dirt into the lines. Also, pay attention to the correct installation position. It is possible to install the filter backwards.
FRONT
See Figure 2
  1. If applicable, disengage the filter or hose from its retaining clip.
  2. Using two fuel line clamps, pinch off both fuel lines. Take care not to crush the lines; just clamp them shut.
If the fuel hoses are hard or cracked, it is necessary to replace them.
0900c1528005f267.jpgFig. 2: Front fuel filter used on carbureted engines
  1. Loosen the fuel line clamps and slide them back.
  2. Using a twisting motion, remove the fuel lines from the filter.
  3. To install, use a new fuel filter and reverse the removal procedures. Start the engine and check for leaks. Correct any leaks immediately.
REAR
See Figures 3, 4, 5 and 6
  1. Raise and safely support the rear of the vehicle. Remove the left rear wheel.
  2. Remove the bolts securing the filter and its basket to the fuel tank.
0900c1528005f268.jpgFig. 3: Remove the bolts securing the filter and its basket to the fuel tank ...
  1. Push the fuel filter retaining tab and release it from the basket.
0900c1528005f269.jpgFig. 4: ... then release the basket from the filter
  1. Using two fuel line clamps, pinch off both fuel lines. Take care not to crush the lines; just clamp them shut.
0900c1528005f26a.jpgFig. 5: Clamp the fuel lines shut. If the lines are hard, cracked or brittle, they must be replacedIf the fuel hoses are hard or cracked, it is necessary to replace them.
  1. Loosen the fuel line clamps and slide them back.
  2. Using a twisting motion, pull the fuel lines from the fuel filter; remove the filter.
0900c1528005f26b.jpgFig. 6: After sliding the retaining clamps back, the filter can be removed from the linesTo install:
  1. Use a new filter and reverse the removal procedures.
  2. Make certain the retaining tabs are engaged when the filter is installed in the holder. Tighten the bolts until snug.
  3. Install the left rear wheel. Lower the car to the ground.
  4. Start the engine and check for leaks. Correct any leaks immediately.
Fuel Injected Engines
See Figures 7, 8, 9, 10, 11 and 12
The canister fuel filter is located in the engine compartment. When buying the new filter, also buy new washers for the banjo bolts and the service bolt. Failure to replace these washers invites high-pressure fuel leaks. Replacing the washers is required, not recommended.
  1. Disconnect the negative battery terminal.
  2. The fuel system is under pressure. Release pressure slowly and contain spillage. Observe "no smoking/no open flame" precautions. Have a Class B-C (dry powder) fire extinguisher within arm's reach at all times.
  3. Disconnect the banjo bolts and/or threaded fuel line fitting from the fuel filter. Use of a flare nut or line wrench is recommended for disconnecting and attaching this fitting.
0900c1528005f26c.jpgFig. 7: Fuel filter used on fuel injected Accords through 1989 0900c1528005f26d.jpgFig. 8: Fuel filter on 1990-93 fuel injected Accords 0900c1528005f26e.jpgFig. 9: Fuel filter used on fuel injected Preludes through 1991
  1. Loosen the fuel filter clamp bolt, then remove the filter.
To install:
  1. Install the new filter and secure the clamp bolt.
  2. The upper and lower washers on each banjo bolt and the washer on the service bolt MUST be replaced whenever the bolts are loosened. Install the washers and banjo bolts. Tighten the banjo bolts to 16 ft. lbs. (22 Nm) on all models except 1992-95 Preludes. On these models, tighten the bolt to 20 ft. lbs. (28 Nm). If applicable, tighten the threaded fuel line fitting to 27 ft. lbs. (37 Nm).
0900c1528005f26f.jpgFig. 10: Fuel filter used on 1992-95 Preludes 0900c1528005f270.jpgFig. 11: Fuel filter used on 1994-95 4-cylinder AccordsIt will be necessary to use a crow's foot attachment on a torque wrench to properly tighten the threaded fuel line fitting.
  1. Tighten the service bolt to 9 ft. lbs. (12 Nm).
  2. Start the engine and check for leaks. The engine may crank longer than normal until full fuel pressure is developed. Correct any leaks immediately.
0900c1528005f271.jpgFig. 12: V-6 Accord fuel filter

Nov 23, 2008 | 1985 Honda Accord

Not finding what you are looking for?
1993 Buick Park Avenue Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...