Question about 1995 Volvo 960

1 Answer

I need to know where the idle valve is... - 1995 Volvo 960

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 90 Answers

The one underneath connected together the air flow rubber hose.

Posted on Nov 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is an IAC Valve


Google is your friend in such questions.

  • Idle air control actuator - Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Idle_air_control_actuator An idle air control actuator or idle air control valve (IAC actuator/valve) ... Idle air control actuator; MAP sensor; Mass flow sensor; Oxygen sensor; Starter motor;
  • how to tell if your iac valve is going bad - YouTube www.youtube.com/watch?v=oNO8GCN8jQA
    • BY TIMMY102345
    • 6 MIN
    • 939K VIEWS
    2009-09-07 · Video embedded · how to tell if your iac valve is going bad timmy102345. ... #372 Better repair method Toyota Camry Idle Air Control Valve - ...
  • 4 Ways to Check an Idle Air Control Valve - wikiHow www.wikihow.com/Check-an-Idle-Air-Control-Valve
    • 525K VIEWS
    2015-12-11 · How to Check an Idle Air Control Valve. ... Again, an idle air control valve can have an issue or fault without triggering a check engine light. 2.


  • There are also videos in this link. How to check and fix.

  • What is an IAC Valve Bing video

    May 12, 2016 | 1992 Toyota Paseo

    1 Answer

    I have a 2002 taurus idles high from 1000 to 1800 rpm's, 2-5 seconds when hot or cold then comes down to correct idle, happens on start up or driving. Suggestions?


    chech engine light is letting you know that the idle air valve has been disconnected. looks like you have a bad idle air valve.

    Aug 19, 2014 | 2002 Ford Taurus

    1 Answer

    2001 dodge dakota sport with 2.5 engine idles high when I start it up, continues idling high, when pushing clutch in to change gears it idles extremely high


    Does it do it if you disconnect the idle air control valve ?
    You need to know if its a vac leak or if the computer is making the valve open too far.

    Feb 09, 2014 | 2001 Dodge Dakota

    1 Answer

    I don't have a 2004 jeep wrangler I have a 2004 GMC ENVOY< PLEase tell me where the idle air control valve is located on MY CAR!!!


    Here's a link http://www.youtube.com/watch?v=VdvgsaDmkac
    It shows how to clean, and reinstall the throttle body on a 4.2 inline 6 trailblazer. which I believe is very much like your Envoy. The idle air control valve is located on the & is part of the throttle body It's the part the wires attach to

    Jul 14, 2013 | Cars & Trucks

    1 Answer

    My 2002 toyota avalon idling low..when I remove my foot from the brake my car shuts down


    i would start by cleaning the throttle body...there is a hole in the bottom of the throttle that you can fill up with some throttle body cleaner and do this a couple of times....what you are doing is trying to clean the idle control valve that is mounted to the bottom of the throttle body....the idle control valve is what is causing this problem and over a period of time it will get carbon built up on it and cause it to stick and either have a low idle and die or a high idle that will not come down......to help you locate the idle control valve it has one electrical connector.two small coolant hoses.and one vac. hose going to it and is located on the bottom of the throttle body and sometimes you can take a 3/8 extension about 2 ft long and tap on the idle control valve to unstick it but it probably want last to long.....try to clean it first and tap on it if the idle still isnt doing right and if it keeps on acting up you will need to replace it.......this is a common problem....if you need more info let me know and i hope this will help you....also if you could let me and fixya know if i was able to help you in any way......thanks and good luck.....have a blessed day......

    Aug 08, 2011 | 2002 Toyota Avalon

    1 Answer

    Whats will my car do if the idle air control valve goes bad


    The engine will idle very rough or it will die at idle.

    A simple way to test, try removing the IAC valve completely from the intake manifold, leaving an exposed opening to let air in the manifold. If the engine idles ok with the IAC removed, you'll know it's a problem related to the IAC. You will need further testing to determine if the problem is with the IAC valve itself or with its circuit.

    Mar 24, 2010 | 1994 Chevrolet Camaro

    1 Answer

    3.2 liter yamaha engine manual IAC valve How do I replace the IAC valve on this engine? Steps? I just bought a new one and I need to get it replaced. FORD 1994 Taurus SHO 3.2 liter engine YAMAHA


    may just need cleaning with carb cleaner.

    here is 1996, oldest I have:

    Section 03-14: Engine Controls, Electronic 1996 Taurus, Sable Workshop Manual
    REMOVAL AND INSTALLATION Idle Air Control (IAC) Valve Removal
    1. Disconnect battery ground cable (14301). Refer to Section 14-01 .
    1. Disconnect the engine control sensor wiring (12A581) from the idle air control valve (IAC valve) (9F715) at the idle air control valve electrical connector.
    1. Remove the two idle air control valve retaining bolts.
    1. Remove the idle air control valve and idle air control valve gasket.
    Installation
    1. NOTE: If scraping is necessary, be careful not to damage idle air control valve gasket surfaces, or drop material into intake manifold (9424) or throttle body (9E926) (depending upon application).

      Clean idle air control valve gasket mating surfaces.
    1. To install idle air control valve, reverse Removal procedure.
    1. Tighten the idle air control valve retaining bolts to 8-12 Nm (71-106 lb-in).
    33b4417.gif

    Jan 14, 2010 | 1994 Ford Taurus

    1 Answer

    Idling Control Valve


    If the check engen light is on, it's probly the idle air controll valve. The only way to know is to find a shop with an old scan tool (almost impossible). The controll valve is not servicable.

    May 19, 2009 | 1993 Toyota Celica

    2 Answers

    IDLE SPEED CONTROL VALVE IN JAG XJ6


    Hi the idler valve has a set up with jag equpment but there is a way round this,ifyou have had  O2 sensors changed, is the idler working what are the revs when hot. 650 is to low  850 is ok with a hot engine Mike do you know where the idle valve is and the allen key manual adjustment try a quarter turn but mark it so you can turn it back if need be. let me know how it goes   D    

    Jan 11, 2009 | 1995 Jaguar XJ6

    Not finding what you are looking for?
    1995 Volvo 960 Logo

    Related Topics:

    43 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Volvo Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8202 Answers

    Are you a Volvo Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...