Question about 2005 Pontiac G6

1 Answer

I have a 2008 Pontiac G6 and it came with a remote keyless entry and remote start and the remote start is no longer working. When I try to start it the lights flash and the dash lights come on but it does now start. I changed the battery in the remote and the same problem is happening.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 6,826 Answers

I think that the module for the remote start is bad, possibly the connection to the starter circuit is bad.

I would take the vehicle to an auto electric service shop in your area that installs remote starters to diagnose and repair the problem.

Posted on Oct 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I program an aftermarket keyless entry remote to my car


By following the instructions that came with it. If you do not have the manual go to the website of the maker of the system and download them, we do not them here.

Feb 20, 2017 | 2008 Pontiac G6 Sedan

1 Answer

2008 HHR Remote Starter not working


Is this an issue with all 2008 HHR remotes??? Highly doubtful , probably the vehicles keyless entry system . Taking the vehicle to a qualified repair shop an having the keyless entry system checked for DTC'S - diagnostic trouble code's . Do you know what a DTC is ?
The keyless entry system is a vehicle entry device. The keyless entry system is used in conjunction with the body control module (BCM) to remotely activate certain vehicle features. Keyless entry will lock/unlock the doors, or release the rear compartment lid when a corresponding button on the keyless entry transmitter is pressed. This is accomplished by the transmitter sending a radio frequency to the remote control door lock receiver (RCDLR). The RCDLR interprets the signal and activates the requested function via a serial data message to the BCM. A low transmitter or vehicle battery or radio frequency (RF) interference from aftermarket devices, such as 2-way radios, power inverters, computers, etc., may cause a system malfunction. High RF traffic areas may also cause interference that could lead to a malfunction. Keyless entry allows you to operate the following components:
• Door locks
• Liftgate lock
• Remote rear doors (Panel only)
• Vehicle locator/panic alarm
• Illuminated entry lamps
• Remote vehicle start
The keyless entry system has the following components:
• Keyless entry transmitters
• Keyless entry antenna
• 2 Way Advanced Remote Start RCDLR
• BCM

Guessing will not fix this .

Jan 12, 2018 | 2006 Chevrolet HHR

1 Answer

How can i start my car without Remote keyless entry?


Use the driver's door key cylinder> Lock and unlock the car with the key after all doors are closed and this should solve the problem. If not, then it has nothing to do with the RKE Transmitter.

May 03, 2010 | 2006 Pontiac G6

1 Answer

The keyless entry suddenly stop working and now can not start vehicle


on the radio is a menu button scroll into it you will find the place where you can disabel the remote start & you will be able to start the car then O.K. bye bye,...

Oct 20, 2009 | 2006 Pontiac G6

1 Answer

Programing keyless entry for a 2006 Pontiac G6


Do not circumvent the process. Take all your FOBs to a Pontiac/GM dealer. Pay the $40ish to get it all done and walk away with officially programmed FOBs. There is no other way to do this unless you have the highly expensive scan tools they use. Just bite the bullet

Jul 31, 2009 | 2006 Pontiac G6

2 Answers

Remote start


first make sure you have the keyless start entry setup. if u do then you need to lock the door with the transmitter after you lock the door press the start button and hold it down until it starts. It usually takes three or four seconds.

Mar 16, 2009 | 2005 Pontiac G6

1 Answer

Self starter and keyless entry will not work even after i put in a new battery


it seems you have a problem with the communication between the remote and the car. Best solution will be to take it to the dealer so they can reprogram the remote to the car.

Jul 28, 2008 | 2008 Pontiac G6 Sedan

Not finding what you are looking for?
2005 Pontiac G6 Logo

1,173 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...