Question about 1998 Honda Civic

1 Answer

I have a new mirror for my 1998 Honad civic how do I replace it with the old broken one?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 95 Answers

Unbolt and replace if it is electric mirror you will have to remove door panel to unplug electric connection, There is a small plastic plate that needs removed to access the bolts that hold the mirror on they are on the opside side of the mirror interior look for screws first if none are found then just pull it off.

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda civic wing mirror indicator replacement


Do you mean the turn indicator located in the mirror assembly? There is no way to replace that other than to replace the entire mirror assembly. I would be checking the wiring harness to the door before replacing the mirror. There could be a broken wire in the umbilical that goes between the body and the door.

May 18, 2012 | 2005 Honda Civic

1 Answer

Change starter 1990 honad civic lx


send me your email and i will send you the doumentation to change the starter my email is Nielsen_automotive@hotmail.com

Nov 20, 2009 | 1990 Honda Civic

1 Answer

Broken lug nut stud on 98 civic dx coupe


knock it out... use an old nut that will fit the new stud and install the stud. the nut will pull the stud in tight to the flange.

Jul 19, 2009 | 1998 Honda Civic

1 Answer

Remove door mirror on a 1998 honda civic


there should be a plastic cover behind the mirror remove it,
that will give u excess to fasteners.

gl G

May 03, 2009 | 1998 Honda Civic

1 Answer

Need to take off door mirror on 1998 honda civic


there is a plastic cover on the inside that covers the screws to the mirror it must be pry off carefully.depending if it has power mirrors you must unplug the harness.Then remove the three screws that hold the mirror to the door.GoodLuck

May 03, 2009 | 1998 Honda Civic

1 Answer

Replacing Nissan Altima 1998 passenger mirror


to replace it you have to open up the door take off the little plactic piece in the corner of the door,, then there is going to be 3 screws that you have to remove in order to remove the old one, just do the steps in reverse to replace the new mirror, i just had the same issue, but on the driver side.. good luck

Mar 18, 2009 | 1998 Nissan Altima

1 Answer

Broken passenger side mirror on 1998 vw beetle


take the old one off and screw in the new one exactly like theold one was on

Feb 27, 2009 | 1998 Volkswagen Beetle

1 Answer

Changing Door Mirror Glass XJ6(X300)


Hi

You need to put on a pair of gloves, and safety glasses. (Safety First !)
Prise off the broken mirror from the plastic base that it is stuck too.
Give the plastic a clean with nail polish remover or similar.
Peel off the backing on new mirror glass, and carefully stick it on.

Good Luck !

Don´t forget to FixYa Rate Me Please !

John.

Feb 05, 2009 | 1998 Jaguar XK8

2 Answers

How do i remove and replace the driver's side mirror?


If the metal pivot arm is not broken you can just replace the glass and plastic housing. To remove the glass you tilt the glass down towards the floor and use a wide plastic or wood bladed object to prise from behind, the glass should pop off from its clips. Remember to catch it if its not damaged. To remove the housing once the glass is out you need to look underneath the mirror unit, there you will find a small plastic bung, gently prise it out and then use a long small flat bladed screwdriver straight up inside the hole and lever towards the front of the car whilst lifting straight up on the plastic housing, this should then lift off. To replace just slot the new housing on and click into place then fit the glass back, remember to connect the wires first if it is a heated glass.
If the metal pivot arm is broken then you will find the remaining screws behind the plastic trim inside the vehicle.

Oct 26, 2008 | 1998 Volkswagen Beetle

1 Answer

How to replace a wing mirror on 95 Civic VTi Hatchback


There is a black plastic cover on the other side of the mirror, take it off make sure you have the wires long enough to splice back to you will be able to see all the bolts that need to come off to replace the mirror. You will be able to figure out the rest it is very simple

Jun 24, 2008 | 1995 Honda Civic

Not finding what you are looking for?
1998 Honda Civic Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...