Question about 2002 Ford E250

Open Question

My 2002 E250 dome lights no longer come on (or stay on) when the doors are opened, but they come on for about 30 seconds when key fob is pressed for unlock. This is a dealer installed, aftermarket alarm which locks/unlocks the doors remotely.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jaysonemanme
  • 500 Answers

SOURCE: 1998 Ford Windstar fuse problem - dome light stays on etc

you most likely have a bad door ajar switch- the door panel has to be removed to access it, its on the door latch- you can unplug them this will take care of the batt drain prob.as for the locks it may be a switch problem- most ford vehicles will not let you lock the vehicle from the driver's door when it's open to prevent locking the keys in.

Posted on May 27, 2009

  • 3600 Answers

SOURCE: 2002 ford escape front passneger door won't open

Did you try pulling the door handle? they normally over ride the lock, also a coat hanger will unlock it so yuo can get tothe door to fix.

Posted on Jun 18, 2009

  • 733 Answers

SOURCE: driver's door won't unlock with key or remote, but does w/handle

need to replace door lock actuator.

Posted on Sep 24, 2009

Testimonial: "Thanks for your quick and precise response."

Murphybanton
  • 2004 Answers

SOURCE: how do I program remote to unlock the doors of 2002 ford taurus?

Come on chat wherein you can stand close to the car while I guide you.

I am Murphybanton.

I am online now.

Posted on Oct 05, 2009

roniecon
  • 6826 Answers

SOURCE: The door ajar light is on but none off the doors

You have a door jab switch not working

Posted on Jan 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Interior light stays on when driving.goes off when I use key fob to lock


Interior lights will not turn off when door closed - VW Audi Forum

www.vwaudiforum.co.uk/.../36009-Interior-lights-will-not-turn-off-whe...
... locking when using key fob, only from the inside via the lock on the drivers door ...by key fob and manually turn off the interior lights but the door lights stay on.

close door light & interior lights - CarGurus

www.cargurus.com > Questions > Ford > Edge

CarGurusJul 24, 2010 - close door light & interior lights - close door light on my ford edge is lit up on the dash and the interior lights wont go off. all the doors, truck, and . ... are completly shut. what to do? help before my battery goes dead. ... charged Interior lights work Headlights are strong Key fob locks and ... Used Ford Escape".

Door Chimes, interior lights on when stopped, and power locks have ...

www.grandamgt.com > ... > Technical Q&A

Apr 28, 2011 - 13 posts - ‎5 authors
It really only happens when its totally stopped while in drive. ... Key Fob- It works, but no longer gives the horn sound to confirm its locked. ... The fact that the car doesn't honk when using the remote isn't a problem. ..... Currently my dome light stays lit when on the door position and my alarm goes off as soon ...

Help - Interior lights staying on / door locks going crazy ...

www.mazda3forums.com/...interior.../329450-help-interior-lights-stayin...
Feb 11, 2009 - It seems that my interior lights stay on while im driving. ... If you get into the car start up the car, and then close the door the lights shut off. ... the when youuse the key fob to lock the car at night the interior lights stay on as well.

Jan 27, 2016 | Cars & Trucks

1 Answer

When I press my central locking on my key fob for my Land Rover Freelander 2003 TD4 Diesel , only the rear door can be opened, when I press to lock ALL doors they lock and when I try to unlock them with...


Procedure for 2002 Land Rover models:
1. With the doors shut and from inside the vehicle.
2. Turn ignition to position 1 and back to off within 5 seconds
3. Remove key from ignition and press and hold the unlock button (has
an arrow on it) for 15 seconds during this time press the key lock button
(has Land Rover logo)3 times within 5 seconds
4. Release both buttons
5. Doors will lock and unlock to show correct programming has occurred hope this helps

Jan 05, 2015 | Cars & Trucks

1 Answer

Put new batterys on 2002 f250 diesel now my power door locks dont work and my open door light on dash stays on


as for your door locks, your key fob may have been misprogrammed when you removed the battery. refer to owners manual to reset your locking options on your key fobs. as fot the door open light, try spraying a silicone based product into the inside door lock mechanisms. silicone spray is much better than wd 40.

Feb 25, 2012 | 2002 Ford E250

1 Answer

Battery in key fob went dead need to reset keyfob audi tt 2000


hi you can do this but you will have to have a key that does not have a remote/fob on it ( basically just go get one cut cheaply ) then to reprogram keys/key fob's first using the key without fob, turn ignition on ( do not turn over, just to position 2) then lock drivers door with other key ( do not use fob, just the key itself with fob now complete the following within 30 seconds within 5 seconds( of locking the car) press the unlock button on the first key once ( this programs that key as key memory1) the indicators should flash once to indicate signal received wait 5 seconds then press unlock on key fob vehicle should then unlock meaning key fob has been programmed and programming ended open door turn ignition off , and that's it, it should work if you have more than 1 key with fob, do the same as above but instead of pressing unlock once, you do it twice, if third key 3 x if fourth key 4 x etc etc,

Sep 20, 2010 | Audi TT Cars & Trucks

3 Answers

1998 escort zx2 dome light stays on when switch is set for door; all other indicators, chime for key in ignition etc seem OK. Light works normally in switch on and off positions.


It should stay on for about 30 seconds and go off. Otherwise, the car is 11 years old, so find a switch position which does not drain the battery.

Oct 06, 2009 | 2000 Ford Escort

1 Answer

How to program a keyless entry fob for 2005 gmc envoy - i am replacing the battery in my key fob every 5 days. I have to be right next to the car for it to work. Any idea what would cause this. I ordered a...


Seating in the drivers seat , make sure all doors are closed.Insert key into ignition, don't turn on yet.
Wait for the dome light to go out, then press and hold the door unlock button , make sure it is UNLOCK, while turning the key ON OFF ON OFF Twice , do not engage the started, just on to the point of being on. Release the unlock button,and your doors should lock, then unlock indicating programming mode.At this point hold down both the lock and unlock button on the key fob. After 30 seconds your locks should lock and unlock, indicating the fob is programmed. This must be repeated for all remotes, whether or not it be new or old. After all remotes are programmed, turn the key off and on again to exit programming mode.

May 18, 2009 | 2005 GMC Envoy

3 Answers

Focus remote key fob not working


this info would cost you £30.+ at ford Radio Frequency Programming Instructions:
  • Insert the ignition key and turn from position II (Ignition) to position 0 (All off) and back four times within three seconds.
  • Remove the ignition key. The locking control system is now in "learn mode" for the next 20 seconds and the red warning system LED (By the clock) stays on continuously to indicate this.
  • During the 20 seconds press one of the transmitter buttons. The remotes signal and code number is learned by the locking module and is indicated by flashing the warning system LED.
  • Wait until learn mode times out (20 seconds) or switch the ignition back to ON.nfrared Programming Instructions:
  • Put your key into the ignition and turn to position 1 (Radio). After approximately 10 seconds the red alarm control LED (next to the clock) should illuminate. As soon as it comes on remove the key from the ignition - the LED should remain lit.
  • Point the remote's "eye" at one of the front door sensors and press the rear button until the light on the transmitter illuminates (Keep the button pressed)
  • With the rear button held in press the front button 4 times then release both at the same time. The control lights in both clock and fob will flash 4 times to indicate programming complete.
  • Turn the ignition back on to exit programming mode

Nov 28, 2008 | 2000 Ford Focus

1 Answer

Short duration dome light


Yes there is a delay timer, it should stay on about 15 seconds or until you turn the key on, which ever comes first, this feature is controlled through the body control module aka BCM. On most GM models the BCM is behind the glove box.

Sep 02, 2008 | 2002 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...