Question about 2001 Pontiac Grand Am SE

2 Answers

MALL PGM fuse for a 2001 grand am cant find where its at

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,144 Answers

Hers a video that will show you.
found the mall pgm fuse Key fob instruction

Posted on Mar 02, 2016

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 325 Answers

In the main fuse box.

Posted on Mar 02, 2016

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: where is the MALL PGM plug 2006 pontiac g6

Where is the MALL PGM fues on a 2001 Gram Am.

Posted on Dec 24, 2009

  • 4 Answers

SOURCE: Trying to find Mall Prg fuse on 2006 pontaic grand prix

This fuse is in the passengers side fuse box, open the door and you'll see the panel on the side of the dash. There is a diagram inside the cover to show you what is where.

Posted on Sep 04, 2009

  • 389 Answers

SOURCE: Regarding 97 sunfire remote locks control problem

I don't know the name of it but it may be just under doors. My sugestion is to remove every fuse one at a time and look to see if it has a seperation in the little wire inside the fuse. If so then replace that fuse. You may have more then one burnt fuse so take them all out one at a time and replace them as necessary. Also make sure the battery is good in your hand held remote. I hope this helps, The Raz

Posted on Apr 17, 2010

RaidX
  • 632 Answers

SOURCE: where is the mall pgm

These are normally located in engine and are easy to spot black boxes .

Posted on Jun 22, 2010

  • 175 Answers

SOURCE: Programing keyless entry for a 2006 Pontiac G6

Do not circumvent the process. Take all your FOBs to a Pontiac/GM dealer. Pay the $40ish to get it all done and walk away with officially programmed FOBs. There is no other way to do this unless you have the highly expensive scan tools they use. Just bite the bullet

Posted on Feb 02, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the Mall PGM fuse located on a 2003 Chevrolet Monte Carlo SS


Your vehicle doesn't have MALL PGM fuse . What is it your trying to do ?

Feb 28, 2017 | Chevrolet Cars & Trucks

1 Answer

Where is the MALL PGM on 06 pontiac G6


Your vehicle has a No MALL PGM Fuse !
2004 and up models do not have a mall pgm fuse. You'll need to take it to a GM dealer to program the remote. What is the problem you are having ?
No

Nov 13, 2016 | 2006 Pontiac G6

1 Answer

How do I program keyless entry on my 2002 grand prix? I have tried the way I found by removing mall pgm fuse n open door n turn key to acc. Doesnt work. The fob I have was for gp why it not work?


Important: All transmitters which are to be recognized by the remote control door lock transmitter (RCDLR) must be programmed in a single programming sequence. If the system is placed in program mode it will erase all previously programmed transmitters upon the receipt of the programming signal from the first transmitter. Up to four transmitters can be programmed. Do not operate or program the transmitters in the vicinity of other vehicles that are in the keyless entry program mode. This prevents the programming of the transmitters to the incorrect vehicle.
  1. Remove the ignition key from the ignition lock cylinder.
  2. Close all of the doors.
  3. Remove the MALL PGM fuse from the fuse block.
  4. Insert the ignition key into the ignition lock cylinder.
  5. Turn the ignition to ACC.
  6. The body control module (BCM) will perform the following in order to identify the type of BCM installed in the vehicle:
    ?€¢
    Flash the seat belt indicator 1, 2, or 3 times.


    ?€¢
    Chime 1, 2, or 3 times.

  7. Turn the ignition to OFF, and then back to ACC within 1 second.
  8. The BCM may begin to chime and flash diagnostic trouble codes (DTCs). If the BCM has stored any DTCs, refer to Diagnostic System Check - Body Control System in Body Control System.
  9. Open and then close any vehicle door.
  10. The BCM will chime in order to confirm that the programming mode has been entered.
  11. Press and hold the transmitter LOCK and UNLOCK buttons simultaneously for approximately 14 seconds.
  12. Important: After approximately 7 seconds the BCM will chime once to confirm that synchronization has been completed. After approximately 14 seconds the BCM will chime a second time to confirm that the programming has been completed.
  13. Repeat the previous step in order to program each additional transmitter.
  14. Remove the ignition key from the ignition lock cylinder.
  15. Install the MALL PGM fuse into the fuse block.
  16. Operate the functions of each transmitter in order to verify correct system operation.

Jun 12, 2015 | 2002 Pontiac Grand Prix

1 Answer

How to reprogram a key fob


IMPORTANT: Before entering programming mode, have in possession all of the remotes you
will be useing on the vehicle. Once you program the remote. all previous remotes that were
programmed will be erased from memory. The other remotes will not be functional until you
program the them again.
1. Remove the key from the ignition.
2. Close all doors.
3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or
owner's manual to properly locate the "MALL PGM" fuse.
4. Insert the key into the ignition, and turn to the ACC position.
5. Turn the key to OFF and then back to ACC within 1 second.
6. Open and close any vehicle door. A chime will be heard when the system enters into
programming mode.
7. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds.
IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime
that will confirm successful programming.
8. Repeat step 7 now for each additional remotes to be programmed including any existing
remotes.
9. Remove key from ignition.
10. Install the "MALL PGM" fuse back into the fuse panel and test remote(s).

Sep 10, 2012 | 1999 Pontiac Grand Prix

1 Answer

WHERE IS THE MALL PGM FUSE PANEL LOCATED ON A 2000 PONTIAC GRAND PRIX


There is a 10A MALL/CLUSTER FUSE in the fuse block. There is no MALL/PGM fuse panel.

Oct 22, 2010 | 2000 Pontiac Grand Prix

1 Answer

I need to program the key less entry


IMPORTANT: Before entering programming mode, have in possession all of the remotes you
will be useing on the vehicle. Once you program the remote. all previous remotes that were
programmed will be erased from memory. The other remotes will not be functional until you
program the them again.

1. Remove the key from the ignition.
2. Close all doors.
3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or
owner's manual to properly locate the "MALL PGM" fuse.

4. Insert the key into the ignition, and turn to the ACC position.
5. Turn the key to OFF and then back to ACC within 1 second.
6. Open and close any vehicle door. A chime will be heard when the system enters into
programming mode.

7. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds.
IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime
that will confirm successful programming.

8. Repeat step 7 now for each additional remotes to be programmed including any existing
remotes.

9. Remove key from ignition.
10. Install the "MALL PGM" fuse back into the fuse panel and test remote(s).

May 10, 2010 | 1998 Pontiac Grand Prix

1 Answer

How do i program the remote


IMPORTANT: Before entering programming mode, have in possession all of the remotes you will be useing on the vehicle. Once you program the remote. all previous remotes that were programmed will be erased from memory. The other remotes will not be functional until you program the them again.


1. Remove the key from the ignition.


2. Close all doors.


3. Remove the "MALL PGM" fuse from the fuse panel. Use the legend on the fuse panel or owner's manual to properly locate the "MALL PGM" fuse.


4. Insert the key into the ignition, and turn to the ACC position.


5. Turn the key to OFF and then back to ACC within 1 second.


6. Open and close any vehicle door. A chime will be heard when the system enters into programming mode.


7. Press and hold the remote LOCK and UNLOCK buttons simultaneously for 14 seconds.

IMPORTANT: After 7 seconds, a chime may be heard confirming successful
synchronization. It is necessary to wait approximately 14 seconds for a second chime that will confirm successful programming.


8. Repeat step 7 now for each additional remotes to be programmed including any existing remotes.


9. Remove key from ignition.


10. Install the "MALL PGM" fuse back into the fuse panel and test remote(s).


Thank you for using fixya and good luck

Apr 27, 2010 | 2000 Pontiac Grand Prix

1 Answer

Where is the MALL PGM plug 2006 pontiac g6


Where is the MALL PGM fues on a 2001 Gram Am.

Dec 21, 2009 | 2006 Pontiac G6

Not finding what you are looking for?
2001 Pontiac Grand Am SE Logo

Related Topics:

1,372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...