Question about Chrysler Voyager
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: transmission fluid change
More than likely, like most automatic transmissions, yours does not have an oil plug. You need to drop the transmission oil pan to drain the old oil... You need to buy a transmission filter/pan gasket kit. The filter is located on the bottom of the tranny. You will see it when you remove the pan. Replace the filter, thoroughly remove any traces of old gasket material, clean the mating surfaces, and reinstall the pan with the new gasket. Torque the pan bolts to the manufacturers spec (you should be able to get this where you buy the filter/gasket kit). Refill the transmission through the dipstick (Capacity for the Voyager is 4 quarts, make sure to use ATF Plus (Type 7176) for your particular tranny, NOT Dexron, Mercon, or generic automatic transmission fluid, Chrysler transmissions do not like any other kind and tend to fail quite quickly with the wrong fluid). Fill to the full cold level. Start the engine, move the shifter through all gear ranges, and put it back in park. Leave the engine running and refill to cold full. Drive the car for 5-10 minutes and, with the engine still running and the car in park, fill to Hot full. You should be ready to go!
Posted on Aug 26, 2008
http://www.mvreader.com/multiview/dayco/catalogSearch.php?autoCatalogSearch=1&make=CHRYSLER&model=TOWN%20%26% The Town and Country has the Exact same Motor, Here is the Link to the 3.3 Liter Belt Diagram. It is the First at the Top, Just read the Header. Please Rate My Response! Thanks!4ZYEV3
Posted on Feb 06, 2009
Dear Waterpump Fitter,
These voyagers are actually fairly easy to install the waterpumps on, The pump is located on the passenger side of the vehicle closer to the front (towards the bumper) It should take the first or second timer maybe a couple of hours to install.Please et back to me if you have any other questions..I'M HERE TO HELP!!
Posted on Nov 20, 2009
Tips for a great answer:
Mar 09, 2015 | Chrysler Cars & Trucks
Jun 16, 2014 | 2000 Chrysler Grand Voyager
Jan 24, 2014 | 2001 Chrysler Voyager
Sep 30, 2013 | Cars & Trucks
Apr 25, 2017 | 2000 Chrysler Grand Voyager
Dec 23, 2010 | 2000 Chrysler Grand Voyager
Apr 26, 2010 | Chrysler Voyager Cars & Trucks
Mar 19, 2010 | 2000 Chrysler Grand Voyager
Feb 06, 2009 | 1995 Chrysler LeBaron
Nov 10, 2008 | 2000 Chrysler Grand Voyager
Jul 09, 2018 | Chrysler Cars & Trucks
307 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: