Question about Toyota Camry

Open Question

99 Toyota Camry V6, check-engine-light is on with error code P1410. Would like to know: 1. the most common problem causing the error code; 2. how to test the EGR Valve Position Sensor; 3. any further check suggestions? thanks a lot! Robin

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
dsacco86
  • 1077 Answers

SOURCE: P1410 Code on a 2000 Toyota Camry

P1410 EGR Valve Position Sensor Circuit Malfunction
You may have to replace the sensor. If you get a chilton manual at an autoparts store, it will show you how to test the sensor with some test values in the book. The book should run about $20

Posted on Apr 05, 2009

Ad
  • 14 Answers

SOURCE: Code P0401 toyota Camry 3.0 v6

replace the vsv that has the vacuuum hose running from it to the egr valve

Posted on Jun 05, 2009

  • 7353 Answers

SOURCE: 2000 toyota v6 xle, the engine light is on and the

p1410 may be a code for the EGR position sensor.

Posted on Oct 12, 2009

  • 1757 Answers

SOURCE: toyota 98 camry v6 cambelt timing marks

Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1998 Toyota Camry. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1998/make/toyota/model/camry/1998_toyota_camry_timing_belt_diagram_marks.htm

Posted on Mar 30, 2010

  • 3640 Answers

SOURCE: I am having major issues with my EGR, car runs

have you checked the egr passage way in engine. it maybe plugged up. remove and clean at engine side.

Posted on Jul 06, 2010

Testimonial: "Good information towards the overall problem, sounds like he knows Toyota's better then a lot of the responders."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Check engine light blinking on a 99 toyota camry v6 was told it was a coil code


Ok.
Did they tell you the code so you know which cylinder to check ?

Nov 11, 2015 | Toyota Cars & Trucks

1 Answer

Runs rich wont pull need to know how to pull codes


NO engine size stated. just V6,, V30 body.
the connector is called DLC, diag. Link connector.
it has may usages, not just the flash code, but is fully documented
and varies by engine option,
6 engines were offered, 2 are v6
2.0 L V6 gasoline (1VZ-FE)
2.5 L V6 gasoline (4VZ-FE) not posting liter size, make answers very very hard,
hint, never work on any engine not knowing which it is.
same for buying parts, x10


\the Toyota has 2 ways,
first off, info is in the FSM, (factory service manual)
and is on alldata.com, login and read. but
is common knowledge, (goggle, like 1mil hits?)
its a jumper wire. on most cars. a paper clip, unbent.


1: DASH CEL LMAP , FLASH CODES.
2: A SCAN TOOL
#1 IS FREE
#2 IS A $150 tool, or rent ,barrow, on any shop on earth can do.

here is a 1 click page, and engine type is needed.
http://www.troublecodes.net/toyota/

2nd google hit.
http://autorepair.about.com/library/a/1h/bl750h.htm


i use this scan tool, it works 100 times better than any flashing
bulb. shows all live sensors, etc.
http://www.amazon.com/INNOVA-3120-Diagnostic-Reader-Vehicles/dp/B000KID2ZC

Jun 08, 2014 | 1992 Toyota Camry V6

1 Answer

Please GeoffW1 this are the fualt code diagnose from my toyota camry 1999 model v6 engine FAULT NUMBERS- 1.( p0110 ) 2.( p0135) 3.(p0450) 4.( p1410) 5.(P1411) please i need their locations and...


Sorry, I never noticed this post, for some reason I did not get an email from Fixya. If it is not too late..........
p0110 is the Intake Air Temp sensor or its wiring connector at fault. This is located at the side of the air cleaner housing.
p0135 is a fault in the No 1 oxygen sensor in bank 1, or its wiring connector. This thing is located in the exhaust manifold under the sheet metal shield at the front of the engine
p0450 is an evaporative emission system pressure sensor fault. Many people recommend replacing the fuel filler cap gasket before going further with this one

http://repairpal.com/OBD-II-Code-P0450



p1410 and p1411 indicate an EGR valve malfunction, and it may be enough to simply clean and check it, located on the engine next to the firewall. Also check the vacuum modulator and Vacuum Switch Valve, as shown here p46, 146, 152, 190


http://www.turboninjas.com/camry/eg1.pdf

Nov 15, 2012 | 1999 Toyota Camry

1 Answer

Check engine light obd code po171,po300,po302,po303 1997 camry 2.2 ltr.


PO171 OBD2 Code basically this means that an oxygen sensor in bank 1 has detected a lean condition (too much oxygen in the exhaust). On V6/V8/V10 engines, Bank 1 is the side of the engine that has cylinder #1. The P0171 is one of the more common trouble codes.

his code is triggered by the first downstream (front) O2 sensor. The sensor provides a reading of the air:fuel ratio leaving the engine's cylinders, and the vehicles powertrain/engine control module (PCM/ECM) uses that reading and adjusts to keep the engine running at that optimum ratio of 14.7:1. If something is not right and the PCM cannot maintain the 14.7:1 ratio, but rather there is too much air, it triggers this code.

Nov 06, 2012 | 1997 Toyota Camry

1 Answer

Toyata camry v6 99


You have a ground issue.Current from another circuit is running through the lights to get to ground. this causes them to burn out quickly.You need to do a real detailed visual check.A good component wiring diagram and component locator is a requirement here.

Sep 06, 2012 | Cars & Trucks

1 Answer

I tried to replace the spark plugs in my 02 camry xle v6.. I gave up when seeing that the rear plugs are too far behind the intake manifold then is worth my effort. When I reconnected all the wiring, My...


Sounds like the problem has been resolved. Clear the codes and see what happens. BTW, you will need to pull the plenum completely off the engine in order to service the rear plugs. I would wait until one of the rear coils fails, and one will, and then take care of the coils and plugs at the same time.

Aug 11, 2012 | 2002 Toyota Camry

1 Answer

Where is the ADL linkage located on a 1992 Toyota Camry. Is this system an OBD 1 or 2. It is before 1996 so I am not sure I think it is OBD1. Check engine light is on. Cpttrevor


where is the ADL linkage located on a 1992 Toyota Camry. its inside of door frame its a obd 1 have codes pulled for free at auto parts store get code and look it up for the problem happy holidays

Dec 19, 2010 | 1992 Toyota Camry V6

1 Answer

I have a 2002 toyota camry V6 and did not pass


O2 sensors are a possible cause. It has one converter, but 2 oxygen sensors...1 upstream, and 1 downstream of the converter. Which means one is very easy to get to (under the hood, on the manifold), and one is not. Usually the check engine light will come on if O2 sensors are faulty.

Apr 02, 2010 | 2002 Toyota Camry

2 Answers

P1410 Code on a 2000 Toyota Camry


P1410 EGR Valve Position Sensor Circuit Malfunction
You may have to replace the sensor. If you get a chilton manual at an autoparts store, it will show you how to test the sensor with some test values in the book. The book should run about $20

Apr 04, 2009 | 2000 Toyota Camry

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...