Question about 2007 Suzuki Reno Hatchback

Open Question

Code 702 on my scanner do not know what it means

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

98 Sl2 Shakes a lot. Its throwing codes 702, 303, 327, and 122. I replaced the knock sensor and tps replaced wires, plugs and fuel injector. Could it be a wiring harness?

Hi Chelsea, You do know after fixing the error code problems you need to reset the computer to wipe the error codes... But before disconnecting the battery make sure you have the radio code.... The link below is a web site link with prompts to error codes and solutions.........CHEERS..

Apr 28, 2016 | Cars & Trucks

1 Answer

How do know what the codes mean when u use a scanner

Your scanner should have come with a user manual with the codes listed. If it read cylinder #1 misfire, you already know what it means.

Faulty spark plug or wire
Faulty coil (pack)
Faulty oxygen sensor(s)
Faulty fuel injector

Mar 10, 2015 | Cars & Trucks

1 Answer

I have a Jeep Grand cherokee 2002. The gears have gone into limp mode. i am getting the following error codes: P0703, P0403, P0702, P1130, P2125, P0700, P0579. I am guessing there is a electrical box gone...

no engine options stated, now THAT is a challenge, x100.
4.0L or 4.7L?? 3.1L, 2.7L AND 4.7HO (EXPORT)
i Just wing it, and try to guess.
this is not the Diesel engine , right? is this a USA car or export?
this is a USA site so we must ask that. (nobody does but...must)

the FSM covers this, the factory service manual.
45RFE and 545RFE automatic transmission
the p07 are all transmission errors from the TCM brain.
p04xx is EGR, failure, so skip that. for now.
a/t limp means the TCM , see's gross errors. why it does, takes TESTING. by a technician,
not Gue$$ing, .

here is book for 2002. (USA only, ok ?)

see emission page for all DTCs.
700, 702 and 703
702 is not listed, is that a non USA market engine?
i see lots of posts on 702 or Diesel , why is that? and missing in the gas, FSM i have. ??????
700 means ,Ive got tranny errors see others for why.
703 is brake lamp stuck on failure.
579 --
Cruise control system inoperative 1130
P1130 Oxygen Sensor Circuit Low Variance (Bank 1, Sensor 1)
my guess is this is the first scan in 10 years. and all those codes
are antique? reset the PCM and drive and see the codes that
are real for NOW.
(all cars do that after writing them all down as you did)

2125 (not in my usa FSM oddly)
but googling finds one diesel here.
Throttle/Pedal Position Sensor/Switch "E" Circuit

that is all i can do , with
NOR which of 5 ENGINES USED .
sorry !

Jan 29, 2015 | Jeep Grand Cherokee Cars & Trucks

1 Answer

I am getting scanner codes of P0351 and P0352 for problems with a 2006 Pontiac Vibe, secondary ignition system, how can I fix the potential problems?

The scanner codes will be listed in a booklet of codes for the Pontiac Vibe. Once you know what the codes mean, you replace those parts.

Jan 06, 2015 | 2006 Pontiac Vibe

1 Answer

Running lights work but break lights don't

I don't know what you mean by running light.

if you need an OBDII Code Scanner, click here: OBDII Code Scanner

Nov 06, 2012 | 2005 Mitsubishi Montero Limited

1 Answer

Mazda tribute trouble code p1504

The P1504 means Idle Air Control Circuit Malfunction


Aug 08, 2012 | Mazda Tribute Cars & Trucks

3 Answers

Where do i rent a scanner to check what the codes are on the g6 , with check engine light, and how do i know what codes mean, is there a web site to tell you what the codes are

Go to Auto Zone or Advance auto and they will read them for free. They will also tell you what they mean. If you want to look them up later you can look them up at

Jan 03, 2011 | 2006 Pontiac G6

1 Answer

Service engine soon light is on what does this mean?

It means there is something not right with your vehicle. You can run a scan with an OBD2 diagnostic tool. some parts stores (if not all) will do the check for you or let you use there scanner. Take that information from the scanner (probably a code like, P0306 or something) ask them or come back here and ask to find out what that code means so you know why your engine light is on.

Jun 21, 2010 | 2005 Nissan Altima

1 Answer

Check engine light on 1996 328i BMW, scanner codes P1421 & P1423

go to the link below, type in the code and the difinition of that code comes up in a list as defined by each car maker.

Jan 30, 2010 | 1997 BMW 328

1 Answer

This is what the car computer say: p0120 p1121 p0722 p0502 p0705 is this somethig i can fix? the transmission is in save mode, and wil not shift to 4.

502 and 702 are the VSS or vehicle speed sensor on the transmission, I would start here with a replacement on as it controls parts that set the other the other codes.
121 is the throttle positon sensor may go away when the transmission works .
Did these come from a tech II scanner if so werer they all ' present ' ? some repair shops charge to clear an old code thats fixed anyway .
Dont know what 120 is , not in my isuzu book .~

Aug 12, 2009 | 2000 Isuzu Trooper

Not finding what you are looking for?
2007 Suzuki Reno Hatchback Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides