Question about 2000 Ford Expedition

1 Answer

Does my 2000 ford expidition have a little compartment to replace my fuel pump.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

Fuel Pump Module-in tank, no compartment to replace fuel pump Removal & Installation To Remove:
WARNING
Highly flammable mixtures are always present in any fuel related component. Smoking or carrying lighted tobacco or an open flame of any type may ignite the flammable mixtures.
WARNING
Even when the engine is not running, fuel in the fuel system remains under high pressure. Fuel system pressure must be relieved before working on or disconnecting any of the fuel lines, fuel tubes, or fuel system components. Failure to do so may result in accidental spraying of fuel, personal injury, or a fire hazard.

  1. Remove Fuel Tank. Fuel Pump does my 2000 ford expidition have a little - ford-05-00-3947.gif

  2. Remove fuel pump lock ring.
  3. Remove fuel pump.
  4. Remove and discard fuel pump O-ring.
To Install:
  1. Install new fuel pump O-ring.
  2. Install fuel pump.
  3. Install fuel pump lock ring. Tighten to 66 ft-lb (89 Nm).
  4. Install Fuel Tank.
prev.gif next.gif

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel smell coming from tail pipe 2006 expedition turned off truck now it will not start.


The most common reason for the smell is excessive fuel in the intake.
You might try disabling the fuel system or fuel pump and crank the engine to see if you can dry the cylinders out.
One of the fuel injectors may have stuck open, or you could have a problem with the fuel pressure regulator.

Feb 16, 2013 | 2006 Ford Expedition Eddie Bauer

1 Answer

Is the fuel pump on the 2005 ford expidition easy to change?


No
You have to remove the fuel tank
Then it gets easier, as the pump comes out the top


LISTEN EVERYONE --99.9% of

ALL VEHICLES MADE SINCE 1985
SOME 25 YEARS HAVE THEIR FUEL
PUMPS IN THE FUEL TANKS

VERY VERY FEW HAVE ANY ACCESS
OTHER THAN DROPPING THE TANK

DIRTY,NASTY JOB

Dec 04, 2010 | 2005 Ford Expedition

1 Answer

2000 ford expidition air suspension. air compresor not pumping up or starting at all. I have removed compressor and bench tested it works find must be a control issue any ideas


Replace the air suspension, with strutmasters or similiar product,unless you want to troubleshoot, and put money into your current system,just for the learning experience.

Oct 07, 2010 | 2000 Ford Expedition

2 Answers

Where is the computer on a 2000 Expidition


the computer is usually located behind the glove box of the vehicle.

Jun 08, 2010 | 2000 Ford Expedition

1 Answer

Have some heat in 2000 ford expidition but not


have your heater core pressure checked. it maybe clooged even though you had system flushed. additionally did you buy the correct thermostat? the computer is a sensitive thing and alot of other components are activated because of the temperature. the opening temp is 188-195 degrees. so you should have bought the 185 degree thermostat. i had same problem and bought the higher temp thermostat. i couldn't believe that such a small change would make a big difference. good luck.

Jan 26, 2010 | 2000 Ford Expedition

1 Answer

2000 ranger fuse diagram


Fuel Pump relay switch is in the main box usually located on the drivers side Fender in a black box. According to the owner's manual in the power distribution box in the engine
compartment (Ford recommends disconnecting your battery)
Relay # 5 is the fuel pump relay , and also in the PD BOX is a 20 amp mini-fuse
for the fuel pump relay + RAP module in location # 9


( P.S. - don't forget your fuel pump inertia switch , in the right front passenger area ,
by the right front kick panel )Sometimes this gets kicked by passenger or if the car is bummed hard it could set this item to shut down fuel system. Best of Luck

Aug 28, 2009 | 2000 Ford Ranger SuperCab

2 Answers

Missfire 2000 expidition


there isn't a trouble code that indicates a bad coil... there are misfire codes that can possibly lead to a plug, coil, fuel injector, low compression, or a number of other things. it is possible to have 2 more bad coils-if youve had the engine compartment detailed and they got them wet, that'll do it. other than that it is hard to see 2 coils going at 1 time. spark plugs themselves are more likely.

May 27, 2009 | 2003 Ford Expedition

1 Answer

My truck 1999 ford expidition was at idle and just went dead. I checked the fuses all good.checked the fuel rail no fuel but fuel in tank.no fuel pump noise .truck does not show witch relay is for fuel...


MAYBE NOT. SWAP THE WIPER RELAY FOR THE FUEL PUMP RELAY TO SEE IF THE PUMP TURNS ON. IF IT DOES NOT OPERATE, THEN WHILE SOMEONE TURNS THE KEY TO THE ON POSITION, BANG ON THE BOTTOM OF THE FUEL TANK AND REPEAT THIS AND YOU SHOULD HEAR THE PUMP AFTER A FEW JOLTS TO THE PUMP MOTOR. IF THE PUMP DOES TURN ON, THEN DRIVE IT TO WHERE EVER YOU PLAN ON HAVING IT REPAIRED. THIS MAY ONLY RUN ONE OR TWO TIMES USING THIS METHOD. IF YOU NEED TO BANG ON THE TANK TO JAR THE PUMP LOOSE, THEN IT NEEDS TO BE CHANGED. HOPE THIS HELPS YOU TO RESOLVE THIS ISSUE. PLEASE KEEP ME POSTED. THANK YOU FOR USING FIX-YA AND THANKS IN ADVANCE FOR AN HONEST RATING. BEST OF LUCK

May 14, 2009 | 2000 Ford Expedition

1 Answer

2000 ford expidition


You may have a failing Mass Air Flow sensor, a quick test is to unplug the connector and drive the truck, if it runs better well their you go, the way this works is that the engine processor has failure mode strategy build in, so it substitutes a good signal for the missing one. After that just clear the codes and replace the sensor. The other issue may be fuel pressure, check the pressure and make sure it is ok under a load, a new fuel filter would poss. cure the issue also.

Jul 05, 2008 | 2000 Ford Expedition

Not finding what you are looking for?
2000 Ford Expedition Logo

353 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...