Question about 2007 Nissan Quest 3.5 Minivan
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls.
Posted on Sep 28, 2009
I'm going to send you exploded view of the glove box and the in cabin micro filter cover illustration. Remove the two upper screws on the glove box and carefully pry metal clips loose.
Disconnect glove box lamp electrical connector. Do not let glove box assembly hang from glove box lamp harness.
Remove three lower screws and remove damper clip from glove box door. Separate glove box housing and passenger instrument lower panel.
Remove three screws and remove in cabin micro filter cover.
Remove in cabin micro filters from front heater and cooling unit assembly.
Note When installing two new in cabin micro filters ensure that the filters are facing in the direction indicated by the direction arrow for the airflow. Direction arrow is printed on side of in cabin micro filters.
Install in cabin micro filter cover. Reinstall glove box.
Posted on Oct 10, 2009
Testimonial: "Finaly I found the air flow door with three screws and removed it. The filter will need replacement soon. It is been replaced one time at the dealer."
I have the same problem on my 2004 Nissan quest, and the battery will die if i do not drive it for 3-4 days, i have replace a ACdelco ACD24F60 new battery and it has the same problem too. I just get a Nascar advantage charger Model 11-1577-6 from Canadian tire, and try to recharge it but the LED flash after few hour, I set to normal battery type, any idea how to fix this problem. thanks.
Posted on Feb 14, 2010
the child lock rod may have been extended...
open the driver side door, and with a skinny finger, push that child lock rod back in towards the rear of the sliding door
use the passenger side as reference
once you pushed it in, you can now open it from the inside handle
Posted on Jun 17, 2010
Tips for a great answer:
Oct 21, 2012 | 1997 Nissan Quest
Dec 13, 2010 | 1999 Nissan Quest
Feb 10, 2010 | 2002 Nissan Quest
Oct 06, 2009 | 2001 Nissan Quest
Jun 19, 2009 | 2007 Nissan Quest 3.5 Minivan
May 10, 2009 | 2007 Nissan Quest 3.5 Minivan
Mar 31, 2009 | 2001 Nissan Quest
Feb 23, 2009 | 2001 Nissan Quest
Oct 16, 2008 | 2001 Nissan Quest
Aug 22, 2015 | 2007 Nissan Quest 3.5 Minivan
335 people viewed this question
Usually answered in minutes!