Question about 1999 Jeep Grand Cherokee

1 Answer

A new power boost was install in my 99 laredo, now the red brake light came on , Why????

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 8,522 Answers

May be an unrelated problem--check for leak.

Please see my tip at http://www.fixya.com/cars/r6004281-brake_indicator_light_stays . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 grand Cherokee Laredo v8 all my brake lights went out checked the bulbs fuse and brake switch all are good the tail and signal lights are good. what should I do nextto fix the problem


Have you checked the brake light fuse to see if there is power at the fuse and out of the fuse, also check the brake light switch for power in and out when the pedal is pressed, do that and get back to me.?

Oct 26, 2016 | 2000 Jeep Grand Cherokee Laredo

2 Answers

I have a 99 Jeep Grand Cherokee Laredo. All 3 brake lights dont work i have replaced the brake light switch


have you check for power at the sockets for the brake light. if you have no power and as you say the brake light switch is good then you have a brake in the wire between the two that you will have to find and repair.

Mar 01, 2015 | 1999 Jeep Grand Cherokee

1 Answer

2001 Silverado 2500 HD Why Rear brakes don't work after I installed new hydro-boost power booster, master cylinder, calipers, and pads. I bled master cylinder before installing, and brakes beginn


Hello Patricia,

Have you checked the master brake cylinder reservoir for brake fluid loss?

I don't suspect the master cylinder as you have replaced it... but am more suspect of a leaking brake line or fitting which should have
been discovered when you had the system bled.

The only time I ever had a rear brake problem with a 2500 series Chevrolet was due to seized rear brake caliper guide pins...as your calipers are also new that is not your problem.

If your brake pedal feels spongy and travels to the floor board you have air in the system, a brake fluid leak or a failure in the power steering system, such as a broken hose, broken power steering pump drive belt, or failed pump, would result in a loss of pressure to both the hydro-boost and steering.

Find more information here:

. Hydro Boost Power Assist Systems Operation Diagnosis and Repair

Jul 23, 2017 | 2001 Chevrolet Silverado 2500HD

1 Answer

No pressure or fluid to rear brakes 99 jeep grand cherokee laredo


check the abs control unit. there is 2 lines that from the master cylinder that feed it,and there is 4 lines that come off it. 2 of the lines go to the front brakes and the other 2 go to the back brakes

Feb 01, 2013 | Cars & Trucks

1 Answer

My 99 Jeep grand Cherokee Laredo 4x4 has some brake light problems. The brake lights work fine during the day, but when I need to have my headlights on, my left brake light and tail light competley shut...


If you have any extra fuses, try replacing the ones for the head lights and tail lights. Make sure the fuses you replace are the same color as the ones you replace them with, that way the voltages are the same. Another issue is that a flasher could be going out.

May 01, 2012 | 1999 Jeep Grand Cherokee

1 Answer

Rear tailight , top, goes off when I press the


This sounds very much like a grounding problem on your lamp cluster, some times a cluster of lamps use a common ground ( negative wire). Also some cars use the car body as the ground connection. I think the reason the tail light works when the brake light is off is because the tail light is grounded through the brake light bulb. Check the bulb holder and the ground connection.

Nov 24, 2009 | Jeep Grand Cherokee Cars & Trucks

2 Answers

I have a 99 Intrepid and it wont start. There is no power to the dash(nothing). Battery is 1 year, Starter new. With boost cables, dash lights up, but car only clicks.


battery is dead again let it charge longer then try it.
clean your cables and then have the alt and battery checked if they are both good then something is staying on like mine my brake lights stayed on once and killed the battery
good luck

Nov 09, 2009 | 1999 Dodge Intrepid

2 Answers

When lights are on and brake pedals are pressed all brake lights go off except for top brake light on 99 jeep grand cherokee laredo...


i take it the brake lights work ok when the lights are not on??? check the ground going to the lights

Jan 04, 2009 | 1999 Jeep Grand Cherokee

Not finding what you are looking for?
1999 Jeep Grand Cherokee Logo

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...