Question about 1999 Ford Expedition

1 Answer

My car will shift into all gears but park, it won't start under park gear. Have to start in neutral. We replaced the bushings in the colum, they weer worn out but still no change.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Sift linkage needs to be ajusted

Posted on Oct 12, 2010

  • bradjuliefor Oct 12, 2010

    Is that underneath next to the tranny pan?? We did and there is no more adjustment??

  • bradjuliefor Oct 14, 2010

    Turns out it was the neutral safety switch

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Chevy trailblazer LS gear shifter is stuck in neutral nwill not shift into gear or into park nor allow blazer to start engine


Check your bushing on the shift linkage. These tend to break, very common. Dorman offers a repair bushing.

Jan 30, 2017 | 2002 Chevrolet TrailBlazer

1 Answer

Trail blazer gear shift button


Could be the brake switch or the shift lock solenoid. You may be able to turn the key lock to the unlock position, move the shifter out of park, then start the engine in neutral.
The shifter and the shift lock solenoid would need to be inspected.

Jun 19, 2013 | Cars & Trucks

1 Answer

98 Lincoln Town Car gear shift leakage is a little sloppy. How can I adjust this myself. Have reasonable skills and limited funds. Shop said they could tighten for around $50.00. I have access to a lift...


If your problem is a loose shift lever on the Colum ,it is bad shift tube bushings. You can replace just the nylon bushings on the tube. lower the steering Colum (4 nuts under dash hold it ) be care full not to brake the gear shift indicator cable (nylon string). the tube has 2 brackets that hold it to the Colum (torques head bolts). remove bolts and remove old bushings ,install new ones and reassemble the Colum .All so check for lose bolts at the bottom of shift tube ,a bracket is bolted to tube that connects it to the shift cable.

Feb 26, 2013 | 1994 Lincoln Town Car

1 Answer

Buick gear shifter moves freely and wont shift gears


you can shift it at transmission by hand to neutral or park and have someone inside start the car and you manually put in gear under hood and drive it to shop or garage, wherever

Feb 06, 2013 | 2000 Buick Century

1 Answer

Gear shift cable 2005 chevrolet cavalier


Had the same problem. to shift gear manually with your hands. Look under the brake fluid (about a foot down) and there is a flat piece of metal. On the end of it on the bottom is a little rod with a round end. That is where the shift cable connects. pushing it toward the driver side of the car will put it in park. And if you count the number of clicks from park you can change gears. For example: 1 click from park is Reverse, 2 clicks is Neutral, 3 clicks is Drive. That is if it is all the way towards the driver side. Don't force it. when it stops clicking dont push it anymore. Hope this helps.

Jan 20, 2012 | 2005 Chevrolet Cavalier

1 Answer

88 ford f150 gear shift lock


A common cause when the gear is on the steering column is a worn out pin. That pin holds the lever to the shift assembly. Try removing the gear shift lever and examine it.
  • If the bushing between the pin and the shift is worn out, replace it.
  • Examine the tip of the the gearshift and replace the shift if it's worn out.
Hope I've helped. If not please feel free to contact me with more details.

Nov 20, 2011 | Nissan Cars & Trucks

1 Answer

Can I tighten the linkage on my 94 ford Taurus? The car will not start sometimes then when I put it neutral it usually will. The gears do not go in right they are off on the steering collum by one when in...


Its probably not the linkage, there should be an adjustment under the dash on the steering colum that operates your needle to tell you what gear your in. It might also affect the your ability to start the car because it thinks in gear and not in park or neutral when your turning the ignition. You should try removing the steering column cover and look right below your park, drive and neutral indicator. That's were it should be. There should be some form of adjustment.

Jan 18, 2011 | 1994 Ford Taurus

1 Answer

Car just started today. When driving to it sounds like thump when changing gears. Talked to transmission guy and he said that Mazda is notorious for faulty park/neutral switch. If we replace that it should...


The park/neutral safety switch has two purposes,
1 not to let the engine start unless it is in park or neutral settings.
2 is when you manually switch gears, it tells the computer and the computer keeps the engine in check until you shift, then the computer compensates for that gear and so on.
I would check motor/ transmission mounts, drive shafts, Suspension bushings,struts, or steering linkage first.

Jun 15, 2010 | 2000 Mazda 626

2 Answers

Column Gear Shift Problem 93 Dodge Dakota


try replacing the neutral safety switch

Oct 27, 2008 | 1993 Dodge Dakota

2 Answers

Shift lever not shifting out of park mode even though the engine is starting fine?


If your shift lever is on the stirring colum, there is a button in the colum itself directly underneath the lever that usually retracts whrn you press the breaks, but in this case it isn;t. Simply remove the right portion of the stirring colum and press the button and put in gear while holding it that is a quick solution on putting it in gear but it is not a permenent fix.

Aug 06, 2008 | 1996 Mazda MPV

Not finding what you are looking for?
1999 Ford Expedition Logo

Related Topics:

224 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...