Question about 2001 Chevrolet Silverado 1500

1 Answer

I have an 01 silverado. the abs light comes on when i hit a bump and stays on. does not affect break performance,resets when ignition is turned off and back on

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 249 Answers

Check the grounds under the cab on drivers side cab mount.. they are known to be a problem either corroding or breaking.

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a 2004 chevy 2500hd Silverado with duramax engine. ABS light stays on.


There are wheel sensors at each wheel that look for current when the wheels spin, if one fails then the ABS light comes on.

Jan 02, 2017 | Cars & Trucks

Tip

Chevrolet service light 1991-01


Camaro

1998-01

To reset the "OIL CHANGE" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and then goes out, the system is reset.


Corvette


1997-01

To reset the monitor after an oil change, turn the ignition on. Press the "TRIP" button so that the "OIL LIFE" percentage is displayed. Press "RESET" and hold it for two seconds. The word "RESET" should appear on the monitor, then "OIL LIFE 90%".


Impala,
Monte Carlo


2000-01

Turn the ignition to ON without starting the engine. Fully press and release the accelerator three times within five seconds. If the CHG OIL SOON lights two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not been reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to exit programming. A chime will be heard to verify the exit.


Impala,
Caprice


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Lumina,
Monte Carlo,
Impala,
Caprice


1996-00,
1996-99,
1995-96,
1995-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds. The light will flash and go out.


Corvette


1990-96

After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.


Chevrolet Suburban,
GMC Yukon XL,
Chevrolet Silverado,
GMC Trucks Sierra


2000-01,
1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.


Silverado, Sierra Trucks


1991-93

To reset the "CHANGE ENGINE OIL" message, turn the ignition key to the run position. Press and release the accelerator pedal three times within 5 seconds. If the light flashes for 5 seconds, the system is reset. Repeat procedure as needed.















on Dec 07, 2009 | Chevrolet Camaro Cars & Trucks

1 Answer

New hub and abs light come on when turning or hit bumps


The brake sensors. Cars with antilock brakes have an amber or yellow warning light, which usually says ABS. If this light stays illuminated after the bulb check, it indicates a problem with the antilock braking system. The ABS controller will disable the system and your brakes should function as if you don't have ABS. In this case, you can safely drive the car to a mechanic for service.

Mar 16, 2015 | Cars & Trucks

1 Answer

Service engine, abs, trac off


The service engine light does not affect the abs.You most likely have a broken wire in your abs system which is affected by suspension movement.A code reader which does abs codes will tell you which wheel circuit is turning on the abs light.When there is no abs available the track will turn off.

Jul 03, 2017 | 2000 Pontiac Grand Am GT

1 Answer

After hitting a bump my abs and tc lights came on in my 2005 equinox. They went of when i started the car again then came on after going over a speed bump


Hello.
The ABS, ( anti-lock break system ) has a sensor on each wheel that can come lose after hitting dips and speed bumps. If you are mecahanical you may be able to fix it yourself, if not, any auto shop can fix it in just a couple of minutes.

I'm not real sure about the tc, ( traction control ) system, sorry.

Donnie

Mar 25, 2011 | 2005 Chevrolet Equinox

1 Answer

How do you reset oil change indicator?


Chevrolet Service Light - For Chevrolet Suburban, GMC Yukon XL, Chevrolet Silverado, GMC Trucks Sierra 2000-01 and 1999-00:

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.

I really hope helps with this (remember rated this help) Good luck.

Jan 05, 2010 | 2000 Chevrolet Silverado

1 Answer

Abs break light comes on when i move and stays on


possible wheel speed sensor problem. need to check codes and data with proper scan tool.

Jun 27, 2009 | 2001 Chevrolet Silverado 1500

1 Answer

My 01 chevy silverado 1500 won't start MOST of the time.


There is a clutch safety switch under the dash. When you press the clutch it presses the switch. You might try replacing that and see if that fixes your problem. This would cause it not to start and everything would still come on.

Jan 26, 2009 | 2001 Chevrolet Silverado 1500

2 Answers

VOLVO 2000 V70


Sounds like your car doesn't like bumps!

The abs control modules on these fail regularly due to breaks in the circuit board solder joints. It could be that hitting the bump make the fault occur. There are places that will repair them, however you will need to remove it, or have it removed and send it to them to fix it, or you can replace it.

Either way, you'll need to get the problem diagnosed first., starting by reading out the faults in all the systems. The transmission, cruise control and speedometer all rely on a vehicle speed sensor signal from the abs module, so that is why so many systems are affected.

Bret
RepairPal.com

Sep 18, 2008 | 2001 Volvo V70

Not finding what you are looking for?
Cars & Trucks Logo

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...