Question about Hyundai XG300

1 Answer

I drive a Hyundai GX30 December 1999 model. The problem I have is that when you engage D on automatic mode it will drive fine for a while changing from 1, 2 , 3 upto gear 4 showing on the dash board monitor. All of a sudden the gear selection light will go off and the car will be out of gear. It will suddenly come on again on the gear lights drive for a while and blink out and I am out of gear again. I had to drive back home in reverse gear which is the only gear functioning properly. Kindly advice me on what the promlem is and how to solve it. I really love the car and its performance except for this problem. Rabbeigh Rajab, Gaborone, Botswana.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Hyundai Master
  • 8,013 Answers

There is something drastically wrong with the transmission on your car and it is in your best interest to have a tranny pro look at it.

Posted on Apr 04, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

jigsawbill
  • 398 Answers

SOURCE: transmission problems 4 a 94 s-10 blazer

These transmissions are computer controlled, and this sounds like you have electronic problems coupled with mechanical transmission problems. I suggest you consult a transmission specialist to diagnose your problems.

Posted on Aug 01, 2008

  • 740 Answers

SOURCE: 4 Hi light flashing

Try this before you do any repairs or sp[end any other money. Make sure that vehicle is on a flat surface. Start vehicle and Push down on brakes while holding brake put vehicle in neutral. Still holding brakes in NEUTRAL, Engage 4x4, it should work. If it doesn't get back to me. Good Luck. If I fixed ya leave me a FIX YA comment

Posted on Dec 20, 2008

  • 55 Answers

SOURCE: 92 acura integra s3 dash light constantly blinking

that shop should be responsible. but you can reset by taking negative battery wire off for few minutes. u can also get a book for that car cheap and read through. make sure no other wires disconnected

Posted on Apr 24, 2009

  • 1 Answer

SOURCE: blinking light on dash board

It may be possible that your Park Neutral Position Switch (PNP Switch) is getting ready to fail. The switch is located right on top of your transmission and is connected to your shifter. This is a common problem. I doubt that your entire transmission is failing, because that is rare with the S70 line. Has your check engine light come on? The check engine light can be triggered by the failing PNP switch. You should take the car to a autozone if you do not have a code reader to see if this problem is sending a code to the computer. If you are unsure where the port is for the code reader, it is located inside of the center console armrest and has OBD II on it. It will same something such as Transmission position switch failure....if I can remeber correctly when it happened to me. If it displays this message, then it is definitely the PNP switch failing. If the PNP is failing be careful. Mine failed failed when I pulled into a parking space and as soon as I put the car in park, the check engine light came on my and the red arrow started flashing. I thought something had gotten wet and I decided to turn the car off for a reset, however, it would not let me start the car, because it thought the car was in some other gear besides park or neutral. So you should have it fixed ASAP. If you order the parts online, it can be a cheap fix. fcpgroton.com has this switch for a cheap price with great quality. How many miles do you have on your S70? My switch failed at 110,500. Let me know how that goes for you.

Posted on May 10, 2009

  • 1 Answer

SOURCE: Opel Corsa B automatic transmission Fault

have you replace the transmission fuse it on the cigar lighter circuit?

Posted on Aug 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i engage into 4 Wheel Drive Mode on my V8 4.6 HSE


a 1999 landrover Range Rover is in constant 4 wheel drive. the only change you can make is high or low range and this is handled through the gear shift selection.

Feb 13, 2014 | 1999 Land Rover Range Rover

1 Answer

None of the gears will engage.


it sound lot as if the pump seal has gone

Jul 24, 2013 | 1999 GMC Sonoma

1 Answer

Car does not start on "P" mode


possible cause to your problem could be faulty transaxle range switch or fault in the TCM.

Nov 12, 2012 | 2004 Hyundai Santa Fe

2 Answers

I have toyota axio g grade 2007 december car.what does it mean S & B in gear system.


The short answer:

S is for low speeds with quick pickup.
S is not economical. Thats why the eco light is off.

Use B when you're climbing down steep hills and needs to slow down without overheating the brakes.


The long answer:
  • Brake (B)A mode selectable on some Toyota models. In non-hybrid cars, this mode lets the engine do compression braking, also known as engine braking, typically when encountering a steep downhill. Instead of engaging the brakes, the engine in a non-hybrid car switches to a lower gear and slows down the spinning tires. The engine holds the car back, instead of the brakes slowing it down. For hybrid cars, this mode converts the electric motor into a generator for the battery. It is not the same as downshifting in a non-hybrid car, but it has the same effect in slowing the car without using the brakes. GM called this HR (hill retarder) and GR (grade retarder) in the 1950s.


S has 2 possibilities

  • Second (2 or S)This mode limits the transmission to the first two gear ratios, or locks the transmission in second gear on Ford, Kia, and Honda models. This can be used to drive in adverse conditions such as snow and ice, as well as climbing or going down hills in the winter time. Some vehicles will automatically shift up out of second gear in this mode if a certain RPM range is reached in order to prevent engine damage. Although traditionally considered second gear, there are other names used. Chrysler models with a three-speed automatic since the late 1980s have called this gear 3 while using the traditional names for Drive and Low.
  • S or SportThis is commonly described as 'Sport mode'. It operates in an identical manner as 'D' mode, except that the upshifts change much higher up the engine's rev range. This has the effect on maximising all the available engine output, and therefore enhances the performance of the vehicle, particularly during acceleration. This mode will also downchange much higher up the rev range compared to 'D' mode, maximising the effects of engine braking. This mode will have a detrimental effect on fuel economy. Hyundai has a Norm/Power switch next to the gearshift for this purpose on the Tiburon. GM also used S to indicate a "super" mode, being the same as the 2 position on a Chrysler, shifting between only first and second gears.


Dont use B or S for general driving as both are very low on fuel efficiency.

Jun 21, 2011 | Toyota Corolla Cars & Trucks

1 Answer

My 1999 Hyundai Accent stalls. After few minutes of driving, the car stops and after 15 minutes it re-starts. What is the problem?


When your driving say about 20 or 30 minutes, the car, no matter what, just dies. If the engine cools down, it will start and run just fine, for about another 20 or so minutes, and same thing? Change the coil. its bad, it over heats, and pow. when it cools, works great. Had that happen to me. hope this is the problem

Jan 06, 2011 | 1999 Hyundai Accent

1 Answer

1999 Sonata lock code changed


the remote programming may have been erased-with the doors locking automatically it is a feature that should be able to be changed-you will have to check the owners manual on how to change that feature
as far as the remote-you will have to contact a hyundai dealer about reprogramming the remote-it may also just need a battery

Feb 18, 2010 | 1999 Hyundai Sonata

1 Answer

1999 Accord Automatic Transmission issue


im so sorry to say that Honda has a bad transmission line in the 98-02 accord models.. there were severe recalls on this very matter..I only got rid of my 99 accord V6 because the shop who changed my motor mounts crushed my transmission line and blamed it on me..if you had motor mounts or timing done or serpentine belt(i forgot if it has both or just 1),then check to see if transmission line is crushed it can be seen right underneath the battery..

Jun 24, 2009 | 1999 Honda Accord

1 Answer

Trans drops into 3rd gear won,t shift to 4th


DTC P0734 is "4th gear incorrect ratio" - that's your torque converter 'LOCK UP Clutch" It's worn out (or you're using the wrong Trans Fluid required by Hyundai - SPIII OR Both). The P1624 is simply the Trans Control Unit (computer) communicating to the Engine Control Module (ECM computer) MIL - on request signal to ECM = asking it to turn on "Check Engine" light. MIL = Malfunction Indicator Lamp. When the torque converter 'lock up" clutch slips or doesn't engage, the trans automatically returns to 3rd gear and stays there (it's called 'fail safe' mode) until you cycle the ignition key, then everything resets until the malfunction occurs again.
You'll need to have an AT (Automatic Transaxel) tester hooked up to verify this. Hyundai has a Service Bulletin specifically for "gear incorrect ratio' codes. If when you changed the trans fluid, was it done at a Hyundai Service Center? If not, someone may have installed the wrong fluid.

Jun 01, 2009 | 2000 Hyundai Elantra

1 Answer

Hyundai 1995 Scoupe Automatic gearbox problem


The 1995 is due for a transmission filter change.

May 24, 2017 | 1995 Hyundai Scoupe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...