Question about 1992 Cadillac Brougham

1 Answer

On my 92 brougham drivers door. i need to know the name of the part that the door knob rod connects to. this part also is bolted to the side of the door by 3 bolts. this part also locks the door to the door jam. i believe this part also lifts and pulls down the door knob rod when i put the car in drive or park..

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 503 Answers

Automatic door lock motor .

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Remove outside mirror on 2012 chevy traverse


You need a special puller for the inside door panel. Have to go to an autoparts store for it. Then you take out all the screws on the door panel. The you use the puller on the bottom and sometimes the sides to LOCATE and REMOVE the fasteners..Lift the panel up and away from the door. Careful about any wires that might be connected to switches. Unplug those if present. You will now be looking at a sheet of sound deadening material that has a tar like substance on it. You cannot really save this and it is messy. remove it and then you can see the internal door and window parts. Be careful because the parts are sharp. Long sleeves and gloves are recommended. See if you can reach in under the window and feel for the bolts. If you cannot then the window has to be removed. Locate and remove the glass retainer and remove the window. Then remove any bolts holding the window mechanical parts. Then you should be able to get to the bolts for the mirror.

Jun 07, 2015 | 2012 Chevrolet Traverse

1 Answer

Ford explorer door lock


Pull panel off and have a look at the connection rod and latch assembly.
Rod should go from lock/handle to key hole, to latch assembly.

Could also end up being a bad lock solenoid. (the power lock itself)

Hope this helps

Mar 19, 2014 | 2000 Ford Explorer

1 Answer

Van door


door handle broken or the actuating rods to door handle broken you have to remove door panel to fix problem.

May 18, 2013 | Cars & Trucks

1 Answer

Drivers door won't open from outside


remove door panel,peel back water barrier on top left side,remove 10mm bolt on back of door handle,in top of door jam remove 10mm bolt and Phillips screw right below bolt,carefully pull out door handle and remove rod from it,contact Volu parts in Atlanta Ga at 1-888-280-4057 and order white plastic pivot arm,they will know what you need. remove metal drift pin from handle by squeezing with pliers lightly!!! and pulling remember most handle parts are plastic and old be careful. the only door handle new is OEM and over 100.00 and you have to paint to match car.

Jan 26, 2013 | 1998 Volvo V90

3 Answers

Citroen saxo 1.1 driver door will not open


hi drivers, i am looking into the same fault for my mums Saxo forte. there are three problems as well as the post above about the child lock. (on drivers door, remove the trim panel and cut the poly material away on the end near lock. look in to the right and with the 3 T30 size torx bolts removed, carefully tilt the lock towards you so u can see the white plastic.) the child lock is at the bottom. mums wasn't stuck so i looked further into it and found the handle mechanism to be jammed and broken. this has a linkage rod that needs replacing for a few pounds from Citroen. You will need a 4 mm drill and a rivet gun to change door handle. i fixed this and now door opens and closes and will work with the key. but door wont open from inside using the pull lever. looking closely at the top right of the lock unit check make sure the long link rod is connected at both ends, i have now found that there is a spring or connecting bit that allows the door to open from in car. i am trying to find the right part for this without replacing the lock mechanism at around 70. wen i find this and the door works fully again i will post the fix method.

Jul 09, 2012 | Cars & Trucks

1 Answer

Just want to know if the 1999 deville cadillac is fronmt or real wheel drive


All Cadillac Deville models are FWD (front wheel drive) after 1985. The only RWD models made were the 85-92 Brougham, 92-96 Fleetwood Brougham, the 97-02 Catera, the 2004+ STS and 2003+ CTS.

Dec 15, 2011 | 1999 Cadillac DeVille

1 Answer

Hi I bought cadillac brougham 1991 and I cant register in my country because when checked car they said want to see number pressed in frame vin/chassis number,please if you know which place tells .They...


Cadillac usually stamped the VIN on the first crossmember lip just in front of the radiator, and you should be able to view it by looking down just in front of the radiator towards the driver side, and you might need to take some sandpaper to it in order to actually read it, but that is also not always the case and if it is not located there then let me know.


a2f76b0.jpg


65fe367.jpg

866a924.jpg

Sep 16, 2010 | 1991 Cadillac Brougham

2 Answers

Where is the starter located on a 1992 grand marquis?


Look for a sticker on the driver side door jam.

if your car was made up to 2/92 the starter is on the passenger side of the engine above the oil pan on side of engine block, two bolt's hold starter in place into the transmission housing.

if your car was made after 2/92 the starter is on the driver side also next to the engine block with three bolt's into the transmission housing.

Hope this was very helpful.

Mar 31, 2010 | 1992 Mercury Grand Marquis

1 Answer

Need to replace door latch on 2001 cavalier drivers side, how do you remove the latch? The rods coming from the door handles hook through the arms coming off the latch


Hello, I think I know your problem and I can help. The rods are attached with little plastic fasteners that "swing away" to release the rods. I am sending you a picture of a typical fastener, if you look at it you will see a square channel with one side open. The open part is where you unsnap it. It's a tight squeeze but you can reach in and unsnap the connectors to free the latch, then just remove the bolts holding the latch to the door. When you go to put it all back together, I find it's easier to unbolt the outside door handle and push everything up and out the hole to give room to connect the fasteners. Once everything is connected just slip it all down and bolt the latch to the door and bolt the outside handle back. I hope this helps you with your problem, if not feel free to ask anything else that might help, good luck. fc85c18.jpg

Feb 24, 2010 | 2001 Chevrolet Cavalier

1 Answer

My 2003 toyota echo passinger side mirror will not adjust it just falls forward. It is the type that is manual but has an adjustment knob inside the car. How do I replace it? The whole unit?


It sounds like you may have to replace the entire unit. There are rods inside the housing that connect to the back of the mirror itself. These rods are what allows you to control the mirror and are also what's suppose to keep the mirror stationery. It sounds like the clips have separated.

On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Aug 28, 2009 | 2000 Toyota ECHO

Not finding what you are looking for?
1992 Cadillac Brougham Logo

Related Topics:

114 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...