Question about 2004 Oldsmobile Alero

1 Answer

My blinkers work sometimes and then stop working for a while, then will start working again for no reason, its very random. I dont know what i should do to get this fixed.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,669 Answers

The turn signal flasher is bad. It is built into the hazard switch. Replace the hazard switch. The next time the turn signals quit turn the hazard switch on and off a few times and see if they start working.

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2004 grand cherokee jeep limited edition the back window was broken into, and maybe they tried to do somehting to shut down the alarm system, (we dont know)..battery had to be...


Continued blowing of fuses will normally indicate one of two things first is that a component/device is faulty ando second is that there is a short or intermittent short in the circuit(s) while I am not familiar with jeeps I find it unlikely however that both the blinkers and ac fan have the same circuit/fuse but it is possible they are shorting each other somewhere in or under the main console

Apr 27, 2017 | 2004 Jeep Grand Cherokee

1 Answer

I have a 2004 grand cherokee jeep limited edition the back window was broken into, and maybe they tried to do somehting to shut down the alarm system, (we dont know)..battery had to be...


Diagnosing an electrical issue is never easy or cheap, sorry. When fuses blow, it is due to an improper flow of electrons. When relays go bad, it is due to overheating(which is often due to an improper flow of electrons). The BCM(Body Control Module) could be to blame... let us know how it works out =D

Feb 01, 2014 | 2004 Jeep Grand Cherokee

1 Answer

Hazards dont work but blinkers do


Blinkers and hazards normally work on the same fuse. Sounds like the hazard switch has a problem.Get the hazard switch out and bridge the two connector wires to the switch. If the hazards then work the problem is in the switch.If it don't work you may have a problem in the wiring between the switch and the flasher relay.

May 05, 2013 | 2003 Ford F150 Regular Cab

1 Answer

Blinker, cruise issues...electrical?


The problem is caused by the emergency flasher unit. This is a common problem and you can find a few youtube demos on replacing it. I did it in about 30 mins. I don't remember the cost but it was stocked at my local chevy dealership.
good luck.

Feb 10, 2012 | 2002 Chevrolet Impala

1 Answer

Intermittently my blinkers stop working. When this happens my hazard lights do not work, neither does the traction control button, wiper sprayer, high beams, nor does the bottom driving lights. I've...


The turn signal socket, where the bulbs are fitted, needs to be inspected.Also the wiring needs to be inspected.Wiggle the socket and wiring a bit, then check, if the blinkers start working or not.---------- There is a troubleshooting procedure to confirm the fault,Click this link below and go through the procedure :--- http://howtobyme.blogspot.com/2011/09/blinkers-works-intermittently-on.html ---------- This will help.Thanks.Helpmech.

Sep 19, 2011 | 2007 Chevrolet Tahoe

1 Answer

Blinkers only work sometimes


chevy had an issue with the blinkers and hazards not working all the time i found that when my turn signals stop working push the hazard switch until they blink then the turn signals start working again. its a faulty turn signal/hazard switch that needs to be replace costs about 30 bucks pretty simple to replace.

Dec 24, 2010 | 2000 Chevrolet Malibu

2 Answers

Turning signals not working all the time


Sounds like the blinker relay. Is the emergency flasher switch on the dash above the radio ? If it is the blinkers relay is the same as the emergency relay. If the blinkers stop working pound on the emergency lights switch and if they start working then replace the emergency lights relay switch cause the blinkers is on the same relay as the emergency lights. My 2001 Grand Am does the same and I just hit the emergency lights switch and they start working again.

May 27, 2010 | 2001 Pontiac Sunfire

1 Answer

Blinkers work at start, then stop. Then work as car is restarted


change the blinker relay Or what i call flasher unit

Jun 03, 2009 | 2001 Audi A4

Not finding what you are looking for?
2004 Oldsmobile Alero Logo

784 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8547 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...