Question about Chrysler Crossfire

1 Answer

How do you release the tensionor - Crossfire Chrysler Cars & Trucks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

A socket and breaker bar on the head of the bolt that is in the center of the fensioner roller will give you the leverage to pull the bension offf the belt. Be carefull it takes a good pull to overcome the spring tensioner

Posted on Oct 12, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change timing belt on ford fiesta 2000 Diesel engine


according to picture belt already off
rotate crank to timing mark and position injector pump mark to dot and camshaft pully to dot loosen tensioner and fit belt being careful not to shift marks. Fit belt and release tensioner. rotate engine clockwise a couple of turnsand check if dots still line up. readjust tensionor to belt and refit covors etc...

Nov 16, 2012 | Cars & Trucks

1 Answer

Serpentine belt tensionor


We managed to replace it ...:)

Oct 13, 2012 | 2004 Saab 9-3

1 Answer

How do you fix a 2001cadillac catera serpentine belt


Here is the direct link to show you how to route the belt, you have to release the tensionor first.
http://www.bestvalueautoparts.com/Replacement_Parts/CADILLAC/CATERA/Illust_c_Belt_Routing.html copy and paste link into your address bar

Mar 30, 2011 | 2001 Cadillac Catera

2 Answers

How to adjust a tension pulley?


This vehicle should have an automatic tensioner. You can use a wrench (13mm, 14mm, or 15mm depending on whether it's aftermarket or not) and rotate the pulley bolt clockwise to release tension. If you need to make it tighter, you either has a belt that is in need of replacement or a tensioner that needs to be replaced. This type of automatic tensioner is replaced as an assembly

The tensioner bolt can usually be accessed from above, but it is easier if you can lift the passenger front or the can, remove the wheel, and remove the rear plastic splash shield. This will also make it easier to correctly position a new belt over the crank pulley if necessary.

Feb 13, 2011 | 1993 Saturn SL1

1 Answer

How does one tighten the serpentine belt. can a tensionor pully malfunction


you can`t tighten a serpentine belt. thats what the tensionor is for.replace it.

Dec 04, 2010 | 1995 Oldsmobile Cutlass Ciera

1 Answer

How do I release the tension on a serpentine belt on a 2003 ford Taurus so I can replace the alternator


FOLLOW THE BELT, IT WILL GO AROUND SEVERAL PUMP PULLIES ANS SOMEWHERE ALONG THE PATH YOULL COME ACROSS A "BELT TENSIONOR" IT'S A SMALL WHEEL ABOUT 1.5 T0 2.5 INCHES ACROSS. FEEL FOR A BOLT HEAD IN THE CENTER OF THE WHEEL. FIND A SOCKET THAT FITE AND WITH A STRAIGHT BAR OR RATCHETT ATTACHED TURN THE BOLT IN THE DIRECTION THAT WILL LOOSEN THE TENSION OFF OF THE BELT THE TENSIONOR IS A SPRING LOADED DIVICE THAT AKES UP SLACK IN THE BELT AND KEEPS IT TIGHT.

Sep 20, 2010 | Ford Taurus Cars & Trucks

1 Answer

Adjusment of alternator belt


There is no adjustment, engine has a spring loaded belt tensionor. If belt is squealing check to make sure tensior moves freely, this is the small pulley below the power steering pump. If tensioner moves freely replace belt. These tensionor are very difficult to change as access to mounting bolts is very tight.

Mar 05, 2010 | 2003 Ford Focus

1 Answer

Replace belt on Chevy S10 pickup


Put a 15mm wrench on the tensionor pulley center bolt, release tension and hold, remove belt. Tensionor is spring loaded and should move freely with a fairly good amount of tension so be carefull not to pinch fingers and make sure to use the boxed end of the wrench, keep it squarely and fully seated on the bolt at all times.

Mar 01, 2010 | 2003 Chevrolet S-10

1 Answer

How far should I turn out the serpentine tensionor bolt?


Do not turn it out.. you are going the wrong way.

Jan 16, 2010 | 2003 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...