Question about 2001 Daewoo Lanos
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
DTC 63 Will Set When
No voltage is supplied by the ECM through the EST “B” line while reference pulses are received by the ECM from the crankshaft position sensor
check white wire terminal B on ignition coil to ECM terminal C14 for open circuit or short to ground while disconnected if thats ok check for voltage signal at B while cranking no signal ECU faulty. voltage signal also on A terminal while cranking and check earth terminal C to body no higher than 5 Ohms
power is terminal D 12V
if getting power, earths good, and both signal voltages are going into coil pack, coil pack is faulty.
Posted on Jun 21, 2009
SOURCE: !999 Daewoo Lanos
try getting a chilton's repair manual for your particular car. if you have never done a timing belt before, don't attempt as you can cause severe engine damage if you don't time it correctly, and then try starting it....ie bent valves... costly repairs.
Posted on Oct 13, 2008
Tips for a great answer:
Aug 20, 2011 | 2001 Daewoo Lanos
Dec 12, 2010 | 2001 Daewoo Lanos
Nov 29, 2009 | 2001 Daewoo Lanos
May 01, 2009 | 2001 Daewoo Lanos
Dec 05, 2008 | 2002 Daewoo Lanos
308 people viewed this question
Usually answered in minutes!